- 08 May, 2013 40 commits
-
-
NeilBrown authored
commit 486adf72 upstream. Maintenance of a bad-block-list currently defaults to 'enabled' and is then disabled when it cannot be supported. This is backwards and causes problem for dm-raid which didn't know to disable it. So fix the defaults, and only enabled for v1.x metadata which explicitly has bad blocks enabled. The problem with dm-raid has been present since badblock support was added in v3.1, so this patch is suitable for any -stable from 3.1 onwards. Reported-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 1dfd89af upstream. After a server reboot, the reclaimer thread will recover all the existing locks. For locks that are blocked, however, it will change the value of block->b_status to nlm_lck_denied_grace_period in order to signal that they need to wake up and resend the original blocking lock request. Due to a bug, however, the block->b_status never gets reset after the blocked locks have been woken up, and so the process goes into an infinite loop of resends until the blocked lock is satisfied. Reported-by:
Marc Eshel <eshel@us.ibm.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Oleg Nesterov authored
commit e56fb287 upstream. threadgroup_lock() takes signal->cred_guard_mutex to ensure that thread_group_leader() is stable. This doesn't look nice, the scope of this lock in do_execve() is huge. And as Dave pointed out this can lead to deadlock, we have the following dependencies: do_execve: cred_guard_mutex -> i_mutex cgroup_mount: i_mutex -> cgroup_mutex attach_task_by_pid: cgroup_mutex -> cred_guard_mutex Change de_thread() to take threadgroup_change_begin() around the switch-the-leader code and change threadgroup_lock() to avoid ->cred_guard_mutex. Note that de_thread() can't sleep with ->group_rwsem held, this can obviously deadlock with the exiting leader if the writer is active, so it does threadgroup_change_end() before schedule(). Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Greg Thelen authored
commit 421348f1 upstream. Call cond_resched() in shrink_dcache_parent() to maintain interactivity. Before this patch: void shrink_dcache_parent(struct dentry * parent) { while ((found = select_parent(parent, &dispose)) != 0) shrink_dentry_list(&dispose); } select_parent() populates the dispose list with dentries which shrink_dentry_list() then deletes. select_parent() carefully uses need_resched() to avoid doing too much work at once. But neither shrink_dcache_parent() nor its called functions call cond_resched(). So once need_resched() is set select_parent() will return single dentry dispose list which is then deleted by shrink_dentry_list(). This is inefficient when there are a lot of dentry to process. This can cause softlockup and hurts interactivity on non preemptable kernels. This change adds cond_resched() in shrink_dcache_parent(). The benefit of this is that need_resched() is quickly cleared so that future calls to select_parent() are able to efficiently return a big batch of dentry. These additional cond_resched() do not seem to impact performance, at least for the workload below. Here is a program which can cause soft lockup if other system activity sets need_resched(). int main() { struct rlimit rlim; int i; int f[100000]; char buf[20]; struct timeval t1, t2; double diff; /* cleanup past run */ system("rm -rf x"); /* boost nfile rlimit */ rlim.rlim_cur = 200000; rlim.rlim_max = 200000; if (setrlimit(RLIMIT_NOFILE, &rlim)) err(1, "setrlimit"); /* make directory for files */ if (mkdir("x", 0700)) err(1, "mkdir"); if (gettimeofday(&t1, NULL)) err(1, "gettimeofday"); /* populate directory with open files */ for (i = 0; i < 100000; i++) { snprintf(buf, sizeof(buf), "x/%d", i); f[i] = open(buf, O_CREAT); if (f[i] == -1) err(1, "open"); } /* close some of the files */ for (i = 0; i < 85000; i++) close(f[i]); /* unlink all files, even open ones */ system("rm -rf x"); if (gettimeofday(&t2, NULL)) err(1, "gettimeofday"); diff = (((double)t2.tv_sec * 1000000 + t2.tv_usec) - ((double)t1.tv_sec * 1000000 + t1.tv_usec)); printf("done: %g elapsed\n", diff/1e6); return 0; } Signed-off-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Zhao Hongjiang authored
commit 04df32fa upstream. When we run the crackerjack testsuite, the inotify_add_watch test is stalled. This is caused by the invalid mask 0 - the task is waiting for the event but it never comes. inotify_add_watch() should return -EINVAL as it did before commit 676a0675 ("inotify: remove broken mask checks causing unmount to be EINVAL"). That commit removes the invalid mask check, but that check is needed. Check the mask's ALL_INOTIFY_BITS before the inotify_arg_to_mask() call. If none are set, just return -EINVAL. Because IN_UNMOUNT is in ALL_INOTIFY_BITS, this change will not trigger the problem that above commit fixed. [akpm@linux-foundation.org: fix build] Signed-off-by:
Zhao Hongjiang <zhaohongjiang@huawei.com> Acked-by:
Jim Somerville <Jim.Somerville@windriver.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by:
-
Robert Richter authored
commit 2cc1144a upstream. mkinitrd looks at /sys/class/scsi_host/host$hostnum/proc_name to find the module name of a disk driver. Current name is "highbank-ahci" but the module is "sata_highbank". Rename it to match the module name. Signed-off-by:
Robert Richter <robert.richter@calxeda.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Alexander Graf <agraf@suse.de> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit 6f7a05d7 upstream. Vitaliy reported that a per cpu HPET timer interrupt crashes the system during hibernation. What happens is that the per cpu HPET timer gets shut down when the nonboot cpus are stopped. When the nonboot cpus are onlined again the HPET code sets up the MSI interrupt which fires before the clock event device is registered. The event handler is still set to hrtimer_interrupt, which then crashes the machine due to highres mode not being active. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700333 There is no real good way to avoid that in the HPET code. The HPET code alrady has a mechanism to detect spurious interrupts when event handler == NULL for a similar reason. We can handle that in the clockevent/tick layer and replace the previous functional handler with a dummy handler like we do in tick_setup_new_device(). The original clockevents code did this in clockevents_exchange_device(), but that got removed by commit 7c1e7689 (clockevents: prevent clockevent event_handler ending up handler_noop) which forgot to fix it up in tick_shutdown(). Same issue with the broadcast device. Reported-by:
Vitaliy Fillipov <vitalif@yourcmc.ru> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: 700333@bugs.debian.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Steven Rostedt authored
commit ced9cb1a upstream. A bug was reported that caused localmodconfig to not keep all the dependencies of ATH9K. This was caused by the kconfig file: In drivers/net/wireless/ath/Kconfig:
-
Li Zefan authored
commit 712317ad upstream. We should store file xattrs in struct cfent instead of struct cftype, because cftype is a type while cfent is object instance of cftype. For example each cgroup has a tasks file, and each tasks file is associated with a uniq cfent, but all those files share the same struct cftype. Alexey Kodanev reported a crash, which can be reproduced: # mount -t cgroup -o xattr /sys/fs/cgroup # mkdir /sys/fs/cgroup/test # setfattr -n trusted.value -v test_value /sys/fs/cgroup/tasks # rmdir /sys/fs/cgroup/test # umount /sys/fs/cgroup oops! In this case, simple_xattrs_free() will free the same struct simple_xattrs twice. tj: Dropped unused local variable @cft from cgroup_diput(). Reported-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Li Zefan authored
commit 3ac1707a upstream. The 3rd parameter of flex_array_prealloc() is the number of elements, not the index of the last element. The effect of the bug is, when opening cgroup.procs, a flex array will be allocated and all elements of the array is allocated with GFP_KERNEL flag, but the last one is GFP_ATOMIC, and if we fail to allocate memory for it, it'll trigger a BUG_ON(). Signed-off-by:
-
Zhang Rui authored
commit 94a40931 upstream. Commit 4ae46bef "Thermal: Introduce thermal_zone_trip_update()" introduced a regression causing the fan to be always on even when the system is idle. My original idea in that commit is that: - when the current temperature is above the trip point, keep the fan on, even if the temperature is dropping. - when the current temperature is below the trip point, turn on the fan when the temperature is raising, turn off the fan when the temperature is dropping. But this is what the code actually does: - when the current temperature is above the trip point, the fan keeps on. - when the current temperature is below the trip point, the fan is always on because thermal_get_trend() in driver/acpi/thermal.c returns THERMAL_TREND_RAISING. Thus the fan keeps running even if the system is idle. Fix this in drivers/acpi/thermal.c. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=56591 References: https://bugzilla.kernel.org/show_bug.cgi?id=56601 References: https://bugzilla.kernel.org/show_bug.cgi?id=50041#c45Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Matthias <morpheusxyz123@yahoo.de> Tested-by:
Ville Syrjälä <syrjala@sci.fi> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Wang YanQing authored
commit a6432ded upstream. Commit 53aac44c (ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas) introduced acpi_initrd_override() that passes a wrong value as the second argument to memblock_reserve(). Namely, the second argument of memblock_reserve() is the size of the region, not the address of the top of it, so make acpi_initrd_override() pass the size in there as appropriate. [rjw: Changelog] Signed-off-by:
Wang YanQing <udknight@gmail.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Aaron Lu authored
commit d66af4df upstream. Since commit 30dcf76a, ata_ap_acpi_handle will always do a namespace walk, which requires acquiring an acpi namespace mutex. This made it impossible to be used when calling path has held a spinlock. For example, it can occur in the following code path for pata_acpi: ata_scsi_queuecmd (ap->lock is acquired) __ata_scsi_queuecmd ata_scsi_translate ata_qc_issue pacpi_qc_issue ata_acpi_stm ata_ap_acpi_handle acpi_get_child acpi_walk_namespace acpi_ut_acquire_mutex (acquire mutex while holding lock) This caused scheduling while atomic bug, as reported in bug #56781. Actually, ata_ap_acpi_handle doesn't have to walk the namespace every time it is called, it can simply return the bound acpi handle on the corresponding SCSI host. The reason previously it is not done this way is, ata_ap_acpi_handle is used in the binding function ata_acpi_bind_host by ata_acpi_gtm when the handle is not bound to the SCSI host yet. Since we already have the ATA port's handle in its binding function, we can simply use it instead of calling ata_ap_acpi_handle there. So introduce a new function __ata_acpi_gtm, where it will receive an acpi handle param in addition to the ATA port which is solely used for debug statement. With this change, we can make ata_ap_acpi_handle simply return the bound handle for SCSI host instead of walking the acpi namespace now. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=56781 Reported-and-tested-by: <kenzopl@o2.pl> Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
-
Johan Hovold authored
commit 3427de92 upstream. Add missing iounmap to probe error path and remove. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Derek Basehore authored
commit e005715e upstream. There's a bug where rtc alarms are ignored after the rtc cmos suspends but before the system finishes suspend. Since hpet emulation is disabled and it still handles the interrupts, a wake event is never registered which is done from the rtc layer. This patch reverts commit d1b2efa8 ("rtc: disable hpet emulation on suspend") which disabled hpet emulation. To fix the problem mentioned in that commit, hpet_rtc_timer_init() is called directly on resume. Signed-off-by:
Derek Basehore <dbasehore@chromium.org> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Mel Gorman authored
commit 0cdc444a upstream. As pointed out by Andrew Morton, the swap-over-NFS writeback is not setting PageWriteback before it is queued for direct IO. While swap pages do not participate in BDI or process dirty accounting and the IO is synchronous, the writeback bit is still required and not setting it in this case was an oversight. swapoff depends on the page writeback to synchronoise all pending writes on a swap page before it is reused. Swapcache freeing and reuse depend on checking the PageWriteback under lock to ensure the page is safe to reuse. Direct IO handlers and the direct IO handler for NFS do not deal with PageWriteback as they are synchronous writes. In the case of NFS, it schedules pages (or a page in the case of swap) for IO and then waits synchronously for IO to complete in nfs_direct_write(). It is recognised that this is a slowdown from normal swap handling which is asynchronous and uses a completion handler. Shoving PageWriteback handling down into direct IO handlers looks like a bad fit to handle the swap case although it may have to be dealt with some day if swap is converted to use direct IO in general and bmap is finally done away with. At that point it will be necessary to refit asynchronous direct IO with completion handlers onto the swap subsystem. As swapcache currently depends on PageWriteback to protect against races, this patch sets PageWriteback under the page lock before queueing it for direct IO. It is cleared when the direct IO handler returns. IO errors are treated similarly to the direct-to-bio case except PageError is not set as in the case of swap-over-NFS, it is likely to be a transient error. It was asked what prevents such a page being reclaimed in parallel. With this patch applied, such a page will now be skipped (most of the time) or blocked until the writeback completes. Reclaim checks PageWriteback under the page lock before calling try_to_free_swap and the page lock should prevent the page being requeued for IO before it is freed. This and Jerome's related patch should considered for -stable as far back as 3.6 when swap-over-NFS was introduced. [akpm@linux-foundation.org: use pr_err_ratelimited()] [akpm@linux-foundation.org: remove hopefully-unneeded cast in printk] Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Jerome Marchand authored
commit 2d30d31e upstream. Since commit 62c230bc ("mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages"), swap_writepage() calls direct_IO on swap files. However, in that case the page isn't redirtied if I/O fails, and is therefore handled afterwards as if it has been successfully written to the swap file, leading to memory corruption when the page is eventually swapped back in. This patch sets the page dirty when direct_IO() fails. It fixes a memory corruption that happened while using swap-over-NFS. Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Prarit Bhargava authored
commit 8f294b5a upstream. The settimeofday01 test in the LTP testsuite effectively does gettimeofday(current time); settimeofday(Jan 1, 1970 + 100 seconds); settimeofday(current time); This test causes a stack trace to be displayed on the console during the setting of timeofday to Jan 1, 1970 + 100 seconds: [ 131.066751] ------------[ cut here ]------------ [ 131.096448] WARNING: at kernel/time/clockevents.c:209 clockevents_program_event+0x135/0x140() [ 131.104935] Hardware name: Dinar [ 131.108150] Modules linked in: sg nfsv3 nfs_acl nfsv4 auth_rpcgss nfs dns_resolver fscache lockd sunrpc nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables kvm_amd kvm sp5100_tco bnx2 i2c_piix4 crc32c_intel k10temp fam15h_power ghash_clmulni_intel amd64_edac_mod pcspkr serio_raw edac_mce_amd edac_core microcode xfs libcrc32c sr_mod sd_mod cdrom ata_generic crc_t10dif pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm ahci pata_atiixp libahci libata usb_storage i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 131.176784] Pid: 0, comm: swapper/28 Not tainted 3.8.0+ #6 [ 131.182248] Call Trace: [ 131.184684] <IRQ> [<ffffffff810612af>] warn_slowpath_common+0x7f/0xc0 [ 131.191312] [<ffffffff8106130a>] warn_slowpath_null+0x1a/0x20 [ 131.197131] [<ffffffff810b9fd5>] clockevents_program_event+0x135/0x140 [ 131.203721] [<ffffffff810bb584>] tick_program_event+0x24/0x30 [ 131.209534] [<ffffffff81089ab1>] hrtimer_interrupt+0x131/0x230 [ 131.215437] [<ffffffff814b9600>] ? cpufreq_p4_target+0x130/0x130 [ 131.221509] [<ffffffff81619119>] smp_apic_timer_interrupt+0x69/0x99 [ 131.227839] [<ffffffff8161805d>] apic_timer_interrupt+0x6d/0x80 [ 131.233816] <EOI> [<ffffffff81099745>] ? sched_clock_cpu+0xc5/0x120 [ 131.240267] [<ffffffff814b9ff0>] ? cpuidle_wrap_enter+0x50/0xa0 [ 131.246252] [<ffffffff814b9fe9>] ? cpuidle_wrap_enter+0x49/0xa0 [ 131.252238] [<ffffffff814ba050>] cpuidle_enter_tk+0x10/0x20 [ 131.257877] [<ffffffff814b9c89>] cpuidle_idle_call+0xa9/0x260 [ 131.263692] [<ffffffff8101c42f>] cpu_idle+0xaf/0x120 [ 131.268727] [<ffffffff815f8971>] start_secondary+0x255/0x257 [ 131.274449] ---[ end trace 1151a50552231615 ]--- When we change the system time to a low value like this, the value of timekeeper->offs_real will be a negative value. It seems that the WARN occurs because an hrtimer has been started in the time between the releasing of the timekeeper lock and the IPI call (via a call to on_each_cpu) in clock_was_set() in the do_settimeofday() code. The end result is that a REALTIME_CLOCK timer has been added with softexpires = expires = KTIME_MAX. The hrtimer_interrupt() fires/is called and the loop at kernel/hrtimer.c:1289 is executed. In this loop the code subtracts the clock base's offset (which was set to timekeeper->offs_real in do_settimeofday()) from the current hrtimer_cpu_base->expiry value (which was KTIME_MAX): KTIME_MAX - (a negative value) = overflow A simple check for an overflow can resolve this problem. Using KTIME_MAX instead of the overflow value will result in the hrtimer function being run, and the reprogramming of the timer after that. Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Prarit Bhargava <prarit@redhat.com> [jstultz: Tweaked commit subject] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
David Engraf authored
commit 51fd36f3 upstream. One can trigger an overflow when using ktime_add_ns() on a 32bit architecture not supporting CONFIG_KTIME_SCALAR. When passing a very high value for u64 nsec, e.g. 7881299347898368000 the do_div() function converts this value to seconds (7881299347) which is still to high to pass to the ktime_set() function as long. The result in is a negative value. The problem on my system occurs in the tick-sched.c, tick_nohz_stop_sched_tick() when time_delta is set to timekeeping_max_deferment(). The check for time_delta < KTIME_MAX is valid, thus ktime_add_ns() is called with a too large value resulting in a negative expire value. This leads to an endless loop in the ticker code: time_delta: 7881299347898368000 expires = ktime_add_ns(last_update, time_delta) expires: negative value This fix caps the value to KTIME_MAX. This error doesn't occurs on 64bit or architectures supporting CONFIG_KTIME_SCALAR (e.g. ARM, x86-32). Signed-off-by:
David Engraf <david.engraf@sysgo.com> [jstultz: Minor tweaks to commit message & header] Signed-off-by:
-
Dylan Reid authored
commit 98682063 upstream. The hardware revision of the codec is based at 0x40. Subtract that before convering to ASCII. The same as it is done for 98095. Signed-off-by:
Dylan Reid <dgreid@chromium.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Kailang Yang authored
commit 7fc7d047 upstream. It's yet another ALC269-variant. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 65033cc8 upstream. When we have a loopback mixer control, this should manage the state whether the output paths include the aamix or not. But the current code blindly initializes the output paths with aamix = true, thus the aamix is enabled unless the loopback mixer control is changed. Also, update_aamix_paths() called by the loopback mixer control put callback invokes snd_hda_activate_path() with aamix = true even for disabling the mixing. This leaves the aamix path even though the loopback control is turned off. This patch fixes these issues: - Introduced aamix_default() helper to indicate whether with_aamix is true or false as default - Fix the argument in update_aamix_paths() for disabling loopback Reported-by:
Lydia Wang <LydiaWang@viatech.com.cn> Signed-off-by:
-
Clemens Ladisch authored
commit c75c5ab5 upstream. The recent changes in the USB API ("implement new semantics for URB_ISO_ASAP") made the former meaning of the URB_ISO_ASAP flag the default, and changed this flag to mean that URBs can be delayed. This is not the behaviour wanted by any of the audio drivers because it leads to discontinuous playback with very small period sizes. Therefore, our URBs need to be submitted without this flag. Reported-by:
Joe Rayhawk <jrayhawk@fairlystable.org> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
commit 60af3d03 upstream. We've got strange errors in get_ctl_value() in mixer.c during probing, e.g. on Hercules RMX2 DJ Controller: ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4 ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4 .... It turned out that the culprit is autopm: snd_usb_autoresume() returns -ENODEV when called during card->probing = 1. Since the call itself during card->probing = 1 is valid, let's fix the return value of snd_usb_autoresume() as success. Reported-and-tested-by:
Daniel Schürmann <daschuer@mixxx.org> Signed-off-by:
-
Clemens Ladisch authored
commit cbc200bc upstream. Commit 88a8516a (ALSA: usbaudio: implement USB autosuspend) introduced autopm for all USB audio/MIDI devices. However, many MIDI devices, such as synthesizers, do not merely transmit MIDI messages but use their MIDI inputs to control other functions. With autopm, these devices would get powered down as soon as the last MIDI port device is closed on the host. Even some plain MIDI interfaces could get broken: they automatically send Active Sensing messages while powered up, but as soon as these messages cease, the receiving device would interpret this as an accidental disconnection. Commit f5f16541 (ALSA: usb-audio: Fix missing autopm for MIDI input) introduced another regression: some devices (e.g. the Roland GAIA SH-01) are self-powered but do a reset whenever the USB interface's power state changes. To work around all this, just disable autopm for all USB MIDI devices. Reported-by: Laurens Holst Signed-off-by:
-
Calvin Owens authored
commit 1539d4f8 upstream. When recording at 176.2KHz or 192Khz, the device adds a 32-bit length header to the capture packets, which obviously needs to be ignored for recording to work properly. Userspace expected: L0 L1 L2 R0 R1 R2 ...but actually got: R2 L0 L1 L2 R0 R1 Also, the last byte of the length header being interpreted as L0 of the first sample caused spikes every 0.5ms, resulting in a loud 16KHz tone (about the highest 'B' on a piano) being present throughout captures. Tested at all sample rates on an E-Mu 0404USB, and tested for regressions on a generic USB headset. Signed-off-by:
Calvin Owens <jcalvinowens@gmail.com> Signed-off-by:
-
Daniel Mack authored
commit ebfc594c upstream. The USB_DT_CS_ENDPOINT class-specific endpoint descriptor is usually stuffed directly after the standard USB endpoint descriptor, and this is where the driver currently expects it to be. There are, however, devices in the wild that have it the other way around in their descriptor sets, so the USB_DT_CS_ENDPOINT comes *before* the standard enpoint. Devices known to implement it that way are "Sennheiser BTD-500" and Plantronics USB headsets. When the driver can't find the USB_DT_CS_ENDPOINT, it won't be able to change sample rates, as the bitmask for the validity of this command is storen in bmAttributes of that descriptor. Fix this by searching the entire interface instead of just the extra bytes of the first endpoint, in case the latter fails. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
Torstein Hegge <hegge@resisty.net> Reported-and-tested-by:
Yves G <alsa-user@vivigatt.com> Signed-off-by:
-
Takashi Iwai authored
commit e08b34e8 upstream. The commit [b209c4df: ALSA: emu10k1: cache emu1010 firmware] broke the firmware loading of the dock, just (mistakenly) ignoring a different firmware for docks on some models. This patch revives them again. Bugzilla: https://bugs.archlinux.org/task/34865Reported-and-tested-by:
Tobias Powalowski <tobias.powalowski@googlemail.com> Signed-off-by:
-
Duncan Laurie authored
commit 32d33b29 upstream. If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by:
Duncan Laurie <dlaurie@chromium.org> Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Cc: Dirk Hohndel <dirk@hohndel.org> Signed-off-by:
-
Hugh Dickins authored
commit 6ee8630e upstream. On architectures where a pgd entry may be shared between user and kernel (e.g. ARM+LPAE), freeing page tables needs a ceiling other than 0. This patch introduces a generic USER_PGTABLES_CEILING that arch code can override. It is the responsibility of the arch code setting the ceiling to ensure the complete freeing of the page tables (usually in pgd_free()). [catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Anurup m authored
commit ec686c92 upstream. There is a kernel memory leak observed when the proc file /proc/fs/fscache/stats is read. The reason is that in fscache_stats_open, single_open is called and the respective release function is not called during release. Hence fix with correct release function - single_release(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101Signed-off-by:
Anurup m <anurup.m@huawei.com> Cc: shyju pv <shyju.pv@huawei.com> Cc: Sanil kumar <sanil.kumar@huawei.com> Cc: Nataraj m <nataraj.m@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Stephan Schreiber authored
commit de53e9ca upstream. The Linux Kernel contains some inline assembly source code which has wrong asm register constraints in arch/ia64/kvm/vtlb.c. I observed this on Kernel 3.2.35 but it is also true on the most recent Kernel 3.9-rc1. File arch/ia64/kvm/vtlb.c: u64 guest_vhpt_lookup(u64 iha, u64 *pte) { u64 ret; struct thash_data *data; data = __vtr_lookup(current_vcpu, iha, D_TLB); if (data != NULL) thash_vhpt_insert(current_vcpu, data->page_flags, data->itir, iha, D_TLB); asm volatile ( "rsm psr.ic|psr.i;;" "srlz.d;;" "ld8.s r9=[%1];;" "tnat.nz p6,p7=r9;;" "(p6) mov %0=1;" "(p6) mov r9=r0;" "(p7) extr.u r9=r9,0,53;;" "(p7) mov %0=r0;" "(p7) st8 [%2]=r9;;" "ssm psr.ic;;" "srlz.d;;" "ssm psr.i;;" "srlz.d;;" : "=r"(ret) : "r"(iha), "r"(pte):"memory"); return ret; } The list of output registers is : "=r"(ret) : "r"(iha), "r"(pte):"memory"); The constraint "=r" means that the GCC has to maintain that these vars are in registers and contain valid info when the program flow leaves the assembly block (output registers). But "=r" also means that GCC can put them in registers that are used as input registers. Input registers are iha, pte on the example. If the predicate p7 is true, the 8th assembly instruction "(p7) mov %0=r0;" is the first one which writes to a register which is maintained by the register constraints; it sets %0. %0 means the first register operand; it is ret here. This instruction might overwrite the %2 register (pte) which is needed by the next instruction: "(p7) st8 [%2]=r9;;" Whether it really happens depends on how GCC decides what registers it uses and how it optimizes the code. The attached patch fixes the register operand constraints in arch/ia64/kvm/vtlb.c. The register constraints should be : "=&r"(ret) : "r"(iha), "r"(pte):"memory"); The & means that GCC must not use any of the input registers to place this output register in. This is Debian bug#702639 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702639). The patch is applicable on Kernel 3.9-rc1, 3.2.35 and many other versions. Signed-off-by:
Stephan Schreiber <info@fs-driver.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Stephan Schreiber authored
commit 136f39dd upstream. The Linux Kernel contains some inline assembly source code which has wrong asm register constraints in arch/ia64/include/asm/futex.h. I observed this on Kernel 3.2.23 but it is also true on the most recent Kernel 3.9-rc1. File arch/ia64/include/asm/futex.h: static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newval) { if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; { register unsigned long r8 __asm ("r8"); unsigned long prev; __asm__ __volatile__( " mf;; \n" " mov %0=r0 \n" " mov ar.ccv=%4;; \n" "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" : "=r" (r8), "=r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); *uval = prev; return r8; } } The list of output registers is : "=r" (r8), "=r" (prev) The constraint "=r" means that the GCC has to maintain that these vars are in registers and contain valid info when the program flow leaves the assembly block (output registers). But "=r" also means that GCC can put them in registers that are used as input registers. Input registers are uaddr, newval, oldval on the example. The second assembly instruction " mov %0=r0 \n" is the first one which writes to a register; it sets %0 to 0. %0 means the first register operand; it is r8 here. (The r0 is read-only and always 0 on the Itanium; it can be used if an immediate zero value is needed.) This instruction might overwrite one of the other registers which are still needed. Whether it really happens depends on how GCC decides what registers it uses and how it optimizes the code. The objdump utility can give us disassembly. The futex_atomic_cmpxchg_inatomic() function is inline, so we have to look for a module that uses the funtion. This is the cmpxchg_futex_value_locked() function in kernel/futex.c: static int cmpxchg_futex_value_locked(u32 *curval, u32 __user *uaddr, u32 uval, u32 newval) { int ret; pagefault_disable(); ret = futex_atomic_cmpxchg_inatomic(curval, uaddr, uval, newval); pagefault_enable(); return ret; } Now the disassembly. At first from the Kernel package 3.2.23 which has been compiled with GCC 4.4, remeber this Kernel seemed to work: objdump -d linux-3.2.23/debian/build/build_ia64_none_mckinley/kernel/futex.o 0000000000000230 <cmpxchg_futex_value_locked>: 230: 0b 18 80 1b 18 21 [MMI] adds r3=3168,r13;; 236: 80 40 0d 00 42 00 adds r8=40,r3 23c: 00 00 04 00 nop.i 0x0;; 240: 0b 50 00 10 10 10 [MMI] ld4 r10=[r8];; 246: 90 08 28 00 42 00 adds r9=1,r10 24c: 00 00 04 00 nop.i 0x0;; 250: 09 00 00 00 01 00 [MMI] nop.m 0x0 256: 00 48 20 20 23 00 st4 [r8]=r9 25c: 00 00 04 00 nop.i 0x0;; 260: 08 10 80 06 00 21 [MMI] adds r2=32,r3 266: 00 00 00 02 00 00 nop.m 0x0 26c: 02 08 f1 52 extr.u r16=r33,0,61 270: 05 40 88 00 08 e0 [MLX] addp4 r8=r34,r0 276: ff ff 0f 00 00 e0 movl r15=0xfffffffbfff;; 27c: f1 f7 ff 65 280: 09 70 00 04 18 10 [MMI] ld8 r14=[r2] 286: 00 00 00 02 00 c0 nop.m 0x0 28c: f0 80 1c d0 cmp.ltu p6,p7=r15,r16;; 290: 08 40 fc 1d 09 3b [MMI] cmp.eq p8,p9=-1,r14 296: 00 00 00 02 00 40 nop.m 0x0 29c: e1 08 2d d0 cmp.ltu p10,p11=r14,r33 2a0: 56 01 10 00 40 10 [BBB] (p10) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2a6: 02 08 00 80 21 03 (p08) br.cond.dpnt.few 2b0 <cmpxchg_futex_value_locked+0x80> 2ac: 40 00 00 41 (p06) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2b0: 0a 00 00 00 22 00 [MMI] mf;; 2b6: 80 00 00 00 42 00 mov r8=r0 2bc: 00 00 04 00 nop.i 0x0 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; 2c6: 10 1a 85 22 20 00 cmpxchg4.acq r33=[r33],r35,ar.ccv 2cc: 00 00 04 00 nop.i 0x0;; 2d0: 10 00 84 40 90 11 [MIB] st4 [r32]=r33 2d6: 00 00 00 02 00 00 nop.i 0x0 2dc: 20 00 00 40 br.few 2f0 <cmpxchg_futex_value_locked+0xc0> 2e0: 09 40 c8 f9 ff 27 [MMI] mov r8=-14 2e6: 00 00 00 02 00 00 nop.m 0x0 2ec: 00 00 04 00 nop.i 0x0;; 2f0: 0b 58 20 1a 19 21 [MMI] adds r11=3208,r13;; 2f6: 20 01 2c 20 20 00 ld4 r18=[r11] 2fc: 00 00 04 00 nop.i 0x0;; 300: 0b 88 fc 25 3f 23 [MMI] adds r17=-1,r18;; 306: 00 88 2c 20 23 00 st4 [r11]=r17 30c: 00 00 04 00 nop.i 0x0;; 310: 11 00 00 00 01 00 [MIB] nop.m 0x0 316: 00 00 00 02 00 80 nop.i 0x0 31c: 08 00 84 00 br.ret.sptk.many b0;; The lines 2b0: 0a 00 00 00 22 00 [MMI] mf;; 2b6: 80 00 00 00 42 00 mov r8=r0 2bc: 00 00 04 00 nop.i 0x0 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; 2c6: 10 1a 85 22 20 00 cmpxchg4.acq r33=[r33],r35,ar.ccv 2cc: 00 00 04 00 nop.i 0x0;; are the instructions of the assembly block. The line 2b6: 80 00 00 00 42 00 mov r8=r0 sets the r8 register to 0 and after that 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; prepares the 'oldvalue' for the cmpxchg but it takes it from r8. This is wrong. What happened here is what I explained above: An input register is overwritten which is still needed. The register operand constraints in futex.h are wrong. (The problem doesn't occur when the Kernel is compiled with GCC 4.6.) The attached patch fixes the register operand constraints in futex.h. The code after patching of it: static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newval) { if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; { register unsigned long r8 __asm ("r8") = 0; unsigned long prev; __asm__ __volatile__( " mf;; \n" " mov ar.ccv=%4;; \n" "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" : "+r" (r8), "=&r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); *uval = prev; return r8; } } I also initialized the 'r8' var with the C programming language. The _asm qualifier on the definition of the 'r8' var forces GCC to use the r8 processor register for it. I don't believe that we should use inline assembly for zeroing out a local variable. The constraint is "+r" (r8) what means that it is both an input register and an output register. Note that the page fault handler will modify the r8 register which will be the return value of the function. The real fix is "=&r" (prev) The & means that GCC must not use any of the input registers to place this output register in. Patched the Kernel 3.2.23 and compiled it with GCC4.4: 0000000000000230 <cmpxchg_futex_value_locked>: 230: 0b 18 80 1b 18 21 [MMI] adds r3=3168,r13;; 236: 80 40 0d 00 42 00 adds r8=40,r3 23c: 00 00 04 00 nop.i 0x0;; 240: 0b 50 00 10 10 10 [MMI] ld4 r10=[r8];; 246: 90 08 28 00 42 00 adds r9=1,r10 24c: 00 00 04 00 nop.i 0x0;; 250: 09 00 00 00 01 00 [MMI] nop.m 0x0 256: 00 48 20 20 23 00 st4 [r8]=r9 25c: 00 00 04 00 nop.i 0x0;; 260: 08 10 80 06 00 21 [MMI] adds r2=32,r3 266: 20 12 01 10 40 00 addp4 r34=r34,r0 26c: 02 08 f1 52 extr.u r16=r33,0,61 270: 05 40 00 00 00 e1 [MLX] mov r8=r0 276: ff ff 0f 00 00 e0 movl r15=0xfffffffbfff;; 27c: f1 f7 ff 65 280: 09 70 00 04 18 10 [MMI] ld8 r14=[r2] 286: 00 00 00 02 00 c0 nop.m 0x0 28c: f0 80 1c d0 cmp.ltu p6,p7=r15,r16;; 290: 08 40 fc 1d 09 3b [MMI] cmp.eq p8,p9=-1,r14 296: 00 00 00 02 00 40 nop.m 0x0 29c: e1 08 2d d0 cmp.ltu p10,p11=r14,r33 2a0: 56 01 10 00 40 10 [BBB] (p10) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2a6: 02 08 00 80 21 03 (p08) br.cond.dpnt.few 2b0 <cmpxchg_futex_value_locked+0x80> 2ac: 40 00 00 41 (p06) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2b0: 0b 00 00 00 22 00 [MMI] mf;; 2b6: 00 10 81 54 08 00 mov.m ar.ccv=r34 2bc: 00 00 04 00 nop.i 0x0;; 2c0: 09 58 8c 42 11 10 [MMI] cmpxchg4.acq r11=[r33],r35,ar.ccv 2c6: 00 00 00 02 00 00 nop.m 0x0 2cc: 00 00 04 00 nop.i 0x0;; 2d0: 10 00 2c 40 90 11 [MIB] st4 [r32]=r11 2d6: 00 00 00 02 00 00 nop.i 0x0 2dc: 20 00 00 40 br.few 2f0 <cmpxchg_futex_value_locked+0xc0> 2e0: 09 40 c8 f9 ff 27 [MMI] mov r8=-14 2e6: 00 00 00 02 00 00 nop.m 0x0 2ec: 00 00 04 00 nop.i 0x0;; 2f0: 0b 88 20 1a 19 21 [MMI] adds r17=3208,r13;; 2f6: 30 01 44 20 20 00 ld4 r19=[r17] 2fc: 00 00 04 00 nop.i 0x0;; 300: 0b 90 fc 27 3f 23 [MMI] adds r18=-1,r19;; 306: 00 90 44 20 23 00 st4 [r17]=r18 30c: 00 00 04 00 nop.i 0x0;; 310: 11 00 00 00 01 00 [MIB] nop.m 0x0 316: 00 00 00 02 00 80 nop.i 0x0 31c: 08 00 84 00 br.ret.sptk.many b0;; Much better. There is a 270: 05 40 00 00 00 e1 [MLX] mov r8=r0 which was generated by C code r8 = 0. Below 2b6: 00 10 81 54 08 00 mov.m ar.ccv=r34 what means that oldval is no longer overwritten. This is Debian bug#702641 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702641). The patch is applicable on Kernel 3.9-rc1, 3.2.23 and many other versions. Signed-off-by:
-
Alex A. Mihaylov authored
commit 7e9dafd8 upstream. Some cards on Ralink RT30xx chipset not have correctly TX_MIXER_GAIN value in them EEPROM/EFUSE. In this case, we must use default value, but always used EEPROM/EFUSE value. As result we have tranmitt power range from -10dBm to +6dBm instead 0dBm to +16dBm. Correctly value in EEPROM/EFUSE is one or more for RT3070 and two or more for other RT30xx chips. Tested on Canyon CNP-WF518N1 usb Wi-Fi dongle and Jorjin WN8020 usb embedded Wi-Fi module. Signed-off-by:
Alex A. Mihaylov <minimumlaw@rambler.ru> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 769ba721 upstream. Commit b51306c6 (PCI: Set device power state to PCI_D0 for device without native PM support) modified pci_platform_power_transition() by adding code causing dev->current_state for devices that don't support native PCI PM but are power-manageable by the platform to be changed to PCI_D0 regardless of the value returned by the preceding platform_pci_set_power_state(). In particular, that also is done if the platform_pci_set_power_state() has been successful, which causes the correct power state of the device set by pci_update_current_state() in that case to be overwritten by PCI_D0. Fix that mistake by making the fallback to PCI_D0 only happen if the platform_pci_set_power_state() has returned an error. [bhelgaas: folded in Yinghai's simplification, added URL & stable info] Reference: http://lkml.kernel.org/r/27806FC4E5928A408B78E88BBC67A2306F466BBA@ORSMSX101.amr.corp.intel.comReported-by:
Chris J. Benenati <chris.j.benenati@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Yinghai Lu authored
commit 545d6e18 upstream. Found problem on system that firmware that could handle pci aer. Firmware get error reporting after pci injecting error, before os boots. But after os boots, firmware can not get report anymore, even pci=noaer is passed. Root cause: BIOS _OSC has problem with query bit checking. It turns out that BIOS vendor is copying example code from ACPI Spec. In ACPI Spec 5.0, page 290: If (Not(And(CDW1,1))) // Query flag clear? { // Disable GPEs for features granted native control. If (And(CTRL,0x01)) // Hot plug control granted? { Store(0,HPCE) // clear the hot plug SCI enable bit Store(1,HPCS) // clear the hot plug SCI status bit } ... } When Query flag is set, And(CDW1,1) will be 1, Not(1) will return 0xfffffffe. So it will get into code path that should be for control set only. BIOS acpi code should be changed to "If (LEqual(And(CDW1,1), 0)))" Current kernel code is using _OSC query to notify firmware about support from OS and then use _OSC to set control bits. During query support, current code is using all possible controls. So will execute code that should be only for control set stage. That will have problem when pci=noaer or aer firmware_first is used. As firmware have that control set for os aer already in query support stage, but later will not os aer handling. We should avoid passing all possible controls, just use osc_control_set instead. That should workaround BIOS bugs with affected systems on the field as more bios vendors are copying sample code from ACPI spec. Signed-off-by:
-
Tony Luck authored
commit d303e9e9 upstream. Back 2010 during a revamp of the irq code some initializations were moved from ia64_mca_init() to ia64_mca_late_init() in commit c75f2aa1 Cannot use register_percpu_irq() from ia64_mca_init() But this was hideously wrong. First of all these initializations are now down far too late. Specifically after all the other cpus have been brought up and initialized their own CMC vectors from smp_callin(). Also ia64_mca_late_init() may be called from any cpu so the line: ia64_mca_cmc_vector_setup(); /* Setup vector on BSP */ is generally not executed on the BSP, and so the CMC vector isn't setup at all on that processor. Make use of the arch_early_irq_init() hook to get this code executed at just the right moment: not too early, not too late. Reported-by:
Fred Hartnett <fred.hartnett@hp.com> Tested-by:
-
Ming Lei authored
commit f7db5e76 upstream. The inode->i_mutex isn't hold when updating filp->f_pos in read()/write(), so the filp->f_pos might be read as 0 or 1 in readdir() when there is concurrent read()/write() on this same file, then may cause use after free in readdir(). The bug can be reproduced with Li Zefan's test code on the link: https://patchwork.kernel.org/patch/2160771/ This patch fixes the use after free under this situation. Reported-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 288fa3e0 upstream. As part of updating the vmbus protocol, the function hv_need_to_signal() was introduced. This functions helps optimize signalling from guest to host. The newly added memory barrier is needed to ensure that we correctly decide when to signal the host. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Reported-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Sandy Wu authored
commit 57ae1b05 upstream. Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y. Older versions of bintuils do not support the pclmulqdq instruction. The PCLMULQDQ gas macro is used instead. Signed-off-by:
Sandy Wu <sandyw@twitter.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
