- 26 Sep, 2019 2 commits
-
-
Ming Lei authored
cecf5d87 ("block: split .sysfs_lock into two locks") starts to release & acquire sysfs_lock before registering/un-registering elevator queue during switching elevator for avoiding potential deadlock from showing & storing 'queue/iosched' attributes and removing elevator's kobject. Turns out there isn't such deadlock because 'q->sysfs_lock' isn't required in .show & .store of queue/iosched's attributes, and just elevator's sysfs lock is acquired in elv_iosched_store() and elv_iosched_show(). So it is safe to hold queue's sysfs lock when registering/un-registering elevator queue. The biggest issue is that commit cecf5d87 assumes that concurrent write on 'queue/scheduler' can't happen. However, this assumption isn't true, because kernfs_fop_write() only guarantees that concurrent write aren't called on the same open file, but the write could be from different open on the file. So we can't release & re-acquire queue's sysfs lock during switching elevator, otherwise use-after-free on elevator could be triggered. Fixes the issue by not releasing queue's sysfs lock during switching elevator. Fixes: cecf5d87 ("block: split .sysfs_lock into two locks") Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
Commit c48dac13 ("block: don't hold q->sysfs_lock in elevator_init_mq") removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with lockdep_assert_held() called in blk_mq_sched_free_requests() which is run in failure path of elevator_init_mq(). blk_mq_sched_free_requests() is called in the following 3 functions: elevator_init_mq() elevator_exit() blk_cleanup_queue() In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly by 'mutex_lock(&q->sysfs_lock)'. So moving the lockdep_assert_held() from blk_mq_sched_free_requests() into elevator_exit() for fixing the report by syzbot. Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com Fixed: c48dac13 ("block: don't hold q->sysfs_lock in elevator_init_mq") Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
- 25 Sep, 2019 4 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "The highlights are: - automatic recovery of a blacklisted filesystem session (Zheng Yan). This is disabled by default and can be enabled by mounting with the new "recover_session=clean" option. - serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is taken to avoid serializing O_DIRECT reads and writes with each other, this is based on the exclusion scheme from NFS. - handle large osdmaps better in the face of fragmented memory (myself) - don't limit what security.* xattrs can be get or set (Jeff Layton). We were overly restrictive here, unnecessarily preventing things like file capability sets stored in security.capability from working. - allow copy_file_range() within the same inode and across different filesystems within the same cluster (Luis Henriques)" * tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client: (41 commits) ceph: call ceph_mdsc_destroy from destroy_fs_client libceph: use ceph_kvmalloc() for osdmap arrays libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc() ceph: allow object copies across different filesystems in the same cluster ceph: include ceph_debug.h in cache.c ceph: move static keyword to the front of declarations rbd: pull rbd_img_request_create() dout out into the callers ceph: reconnect connection if session hang in opening state libceph: drop unused con parameter of calc_target() ceph: use release_pages() directly rbd: fix response length parameter for encoded strings ceph: allow arbitrary security.* xattrs ceph: only set CEPH_I_SEC_INITED if we got a MAC label ceph: turn ceph_security_invalidate_secctx into static inline ceph: add buffered/direct exclusionary locking for reads and writes libceph: handle OSD op ceph_pagelist_append() errors ceph: don't return a value from void function ceph: don't freeze during write page faults ceph: update the mtime when truncating up ceph: fix indentation in __get_snap_name() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi: - Continue separating the transport (user/kernel communication) and the filesystem layers of fuse. Getting rid of most layering violations will allow for easier cleanup and optimization later on. - Prepare for the addition of the virtio-fs filesystem. The actual filesystem will be introduced by a separate pull request. - Convert to new mount API. - Various fixes, optimizations and cleanups. * tag 'fuse-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (55 commits) fuse: Make fuse_args_to_req static fuse: fix memleak in cuse_channel_open fuse: fix beyond-end-of-page access in fuse_parse_cache() fuse: unexport fuse_put_request fuse: kmemcg account fs data fuse: on 64-bit store time in d_fsdata directly fuse: fix missing unlock_page in fuse_writepage() fuse: reserve byteswapped init opcodes fuse: allow skipping control interface and forced unmount fuse: dissociate DESTROY from fuseblk fuse: delete dentry if timeout is zero fuse: separate fuse device allocation and installation in fuse_conn fuse: add fuse_iqueue_ops callbacks fuse: extract fuse_fill_super_common() fuse: export fuse_dequeue_forget() function fuse: export fuse_get_unique() fuse: export fuse_send_init_request() fuse: export fuse_len_args() fuse: export fuse_end_request() fuse: fix request limit ...
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen. * tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Wrap the buffer from the caller to tpm_buf in tpm_send() MAINTAINERS: keys: Update path to trusted.h KEYS: trusted: correctly initialize digests and fix locking issue selftests/tpm2: Add log and *.pyc to .gitignore selftests/tpm2: Add the missing TEST_FILES assignment
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap updates from Darrick Wong: "After last week's failed pull request attempt, I scuttled everything in the branch except for the directio endio api changes, which were trivial. Everything else will simply have to wait for the next cycle. Summary: - Report both io errors and short io results to the directio endio handler. - Allow directio callers to pass an ops structure to iomap_dio_rw" * tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: move the iomap_dio_rw ->end_io callback into a structure iomap: split size and error for iomap_dio_rw ->end_io
-
- 24 Sep, 2019 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few small remaining wrap-up for this merge window. Most of patches are device-specific (HD-audio and USB-audio quirks, FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is a simple fix (actually two commits) for ASoC core" * tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add DSD support for EVGA NU Audio ALSA: hda - Add laptop imic fixup for ASUS M9V laptop ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies ASoC: pcm3168a: The codec does not support S32_LE ASoC: core: use list_del_init and move it back to soc_cleanup_component ALSA: hda/realtek - PCI quirk for Medion E4254 ALSA: hda - Apply AMD controller workaround for Raven platform ASoC: rsnd: do error check after rsnd_channel_normalization() ASoC: atmel_ssc_dai: Remove wrong spinlock usage ASoC: core: delete component->card_list in soc_remove_component only ASoC: fsl_sai: Fix noise when using EDMA ALSA: usb-audio: Add Hiby device family to quirks for native DSD support ALSA: hda/realtek - Fix alienware headset mic ALSA: dice: fix wrong packet parameter for Alesis iO26
-
Jarkko Sakkinen authored
tpm_send() does not give anymore the result back to the caller. This would require another memcpy(), which kind of tells that the whole approach is somewhat broken. Instead, as Mimi suggested, this commit just wraps the data to the tpm_buf, and thus the result will not go to the garbage. Obviously this assumes from the caller that it passes large enough buffer, which makes the whole API somewhat broken because it could be different size than @buflen but since trusted keys is the only module using this API right now I think that this fix is sufficient for the moment. In the near future the plan is to replace the parameters with a tpm_buf created by the caller. Reported-by:
Mimi Zohar <zohar@linux.ibm.com> Suggested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com>
-
Denis Efremov authored
Update MAINTAINERS record to reflect that trusted.h was moved to a different directory in commit 22447981 ("KEYS: Move trusted.h to include/keys [ver #2]"). Cc: Denis Kenzior <denkenz@gmail.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: linux-integrity@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Reviewed-by:
-
Roberto Sassu authored
Commit 0b6cf6b9 ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each PCR bank. After modification, tpm_pcr_extend() expects that digests are passed in the same order as the algorithms set in chip->allocated_banks. This patch fixes two issues introduced in the last iterations of the patch set: missing initialization of the TPM algorithm ID in the tpm_digest structures passed to tpm_pcr_extend() by the trusted key module, and unreleased locks in the TPM driver due to returning from tpm_pcr_extend() without calling tpm_put_ops(). Cc: stable@vger.kernel.org Fixes: 0b6cf6b9 ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Suggested-by:
-
Petr Vorel authored
Fixes: 6ea3dfe1 ("selftests: add TPM 2.0 tests") Signed-off-by:
Petr Vorel <pvorel@suse.cz> Reviewed-by:
-
Jarkko Sakkinen authored
The Python files required by the selftests are not packaged because of the missing assignment to TEST_FILES. Add the assignment. Cc: stable@vger.kernel.org Fixes: 6ea3dfe1 ("selftests: add TPM 2.0 tests") Signed-off-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "A collection of later fixes and additions, that weren't quite ready for pushing out with the initial pull request. This contains: - Fix potential use-after-free of shadow requests (Jackie) - Fix potential OOM crash in request allocation (Jackie) - kmalloc+memcpy -> kmemdup cleanup (Jackie) - Fix poll crash regression (me) - Fix SQ thread not being nice and giving up CPU for !PREEMPT (me) - Add support for timeouts, making it easier to do epoll_wait() conversions, for instance (me) - Ensure io_uring works without f_ops->read_iter() and f_ops->write_iter() (me)" * tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block: io_uring: correctly handle non ->{read,write}_iter() file_operations io_uring: IORING_OP_TIMEOUT support io_uring: use cond_resched() in sqthread io_uring: fix potential crash issue due to io_get_req failure io_uring: ensure poll commands clear ->sqe io_uring: fix use-after-free of shadow_req io_uring: use kmemdup instead of kmalloc and memcpy -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block updates from Jens Axboe: "Some later additions that weren't quite done for the first pull request, and also a few fixes that have arrived since. This contains: - Kill silly pktcdvd warning on attempting to register a non-scsi passthrough device (me) - Use symbolic constants for the block t10 protection types, and switch to handling it in core rather than in the drivers (Max) - libahci platform missing node put fix (Nishka) - Small series of fixes for BFQ (Paolo) - Fix possible nbd crash (Xiubo)" * tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block: block: drop device references in bsg_queue_rq() block: t10-pi: fix -Wswitch warning pktcdvd: remove warning on attempting to register non-passthrough dev ata: libahci_platform: Add of_node_put() before loop exit nbd: fix possible page fault for nbd disk nbd: rename the runtime flags as NBD_RT_ prefixed block, bfq: push up injection only after setting service time block, bfq: increase update frequency of inject limit block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1 block, bfq: update inject limit only after injection occurred block: centralize PI remapping logic to the block layer block: use symbolic constants for t10_pi type -
Linus Torvalds authored
Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ...
-
Qian Cai authored
set_zspage_inuse() was introduced in the commit 4f42047b ("zsmalloc: use accessor") but all the users of it were removed later by the commits, bdb0af7c ("zsmalloc: factor page chain functionality out") 3783689a ("zsmalloc: introduce zspage structure") so the function can be safely removed now. Link: http://lkml.kernel.org/r/1568658408-19374-1-git-send-email-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vitaly Wool authored
zswap_writeback_entry() maps a handle to read swpentry first, and then in the most common case it would map the same handle again. This is ok when zbud is the backend since its mapping callback is plain and simple, but it slows things down for z3fold. Since there's hardly a point in unmapping a handle _that_ fast as zswap_writeback_entry() does when it reads swpentry, the suggestion is to keep the handle mapped till the end. Link: http://lkml.kernel.org/r/20190916004640.b453167d3556c4093af4cf7d@gmail.comSigned-off-by:
Vitaly Wool <vitalywool@gmail.com> Reviewed-by:
Dan Streetman <ddstreet@ieee.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Hui Zhu authored
This is the third version that was updated according to the comments from Sergey Senozhatsky https://lkml.org/lkml/2019/5/29/73 and Shakeel Butt https://lkml.org/lkml/2019/6/4/973 zswap compresses swap pages into a dynamically allocated RAM-based memory pool. The memory pool should be zbud, z3fold or zsmalloc. All of them will allocate unmovable pages. It will increase the number of unmovable page blocks that will bad for anti-fragment. zsmalloc support page migration if request movable page: handle = zs_malloc(zram->mem_pool, comp_len, GFP_NOIO | __GFP_HIGHMEM | __GFP_MOVABLE); And commit "zpool: Add malloc_support_movable to zpool_driver" add zpool_malloc_support_movable check malloc_support_movable to make sure if a zpool support allocate movable memory. This commit let zswap allocate block with gfp __GFP_HIGHMEM | __GFP_MOVABLE if zpool support allocate movable memory. Following part is test log in a pc that has 8G memory and 2G swap. Without this commit: ~# echo lz4 > /sys/module/zswap/parameters/compressor ~# echo zsmalloc > /sys/module/zswap/parameters/zpool ~# echo 1 > /sys/module/zswap/parameters/enabled ~# swapon /swapfile ~# cd /home/teawater/kernel/vm-scalability/ /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024)) /home/teawater/kernel/vm-scalability# ./case-anon-w-seq 2717908992 bytes / 4826062 usecs = 549973 KB/s 2717908992 bytes / 4864201 usecs = 545661 KB/s 2717908992 bytes / 4867015 usecs = 545346 KB/s 2717908992 bytes / 4915485 usecs = 539968 KB/s 397853 usecs to free memory 357820 usecs to free memory 421333 usecs to free memory 420454 usecs to free memory /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo Page block order: 9 Pages per block: 512 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0 Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Unmovable 6 5 8 6 6 5 4 1 1 1 0 Node 0, zone DMA32, type Movable 25 20 20 19 22 15 14 11 11 5 767 Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 4753 5588 5159 4613 3712 2520 1448 594 188 11 0 Node 0, zone Normal, type Movable 16 3 457 2648 2143 1435 860 459 223 224 296 Node 0, zone Normal, type Reclaimable 0 0 44 38 11 2 0 0 0 0 0 Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate Node 0, zone DMA 1 7 0 0 0 0 Node 0, zone DMA32 4 1652 0 0 0 0 Node 0, zone Normal 931 1485 15 0 0 0 With this commit: ~# echo lz4 > /sys/module/zswap/parameters/compressor ~# echo zsmalloc > /sys/module/zswap/parameters/zpool ~# echo 1 > /sys/module/zswap/parameters/enabled ~# swapon /swapfile ~# cd /home/teawater/kernel/vm-scalability/ /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024)) /home/teawater/kernel/vm-scalability# ./case-anon-w-seq 2717908992 bytes / 4689240 usecs = 566020 KB/s 2717908992 bytes / 4760605 usecs = 557535 KB/s 2717908992 bytes / 4803621 usecs = 552543 KB/s 2717908992 bytes / 5069828 usecs = 523530 KB/s 431546 usecs to free memory 383397 usecs to free memory 456454 usecs to free memory 224487 usecs to free memory /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo Page block order: 9 Pages per block: 512 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0 Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Unmovable 10 8 10 9 10 4 3 2 3 0 0 Node 0, zone DMA32, type Movable 18 12 14 16 16 11 9 5 5 6 775 Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 2669 1236 452 118 37 14 4 1 2 3 0 Node 0, zone Normal, type Movable 3850 6086 5274 4327 3510 2494 1520 934 438 220 470 Node 0, zone Normal, type Reclaimable 56 93 155 124 47 31 17 7 3 0 0 Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate Node 0, zone DMA 1 7 0 0 0 0 Node 0, zone DMA32 4 1650 2 0 0 0 Node 0, zone Normal 79 2326 26 0 0 0 You can see that the number of unmovable page blocks is decreased when the kernel has this commit. Link: http://lkml.kernel.org/r/20190605100630.13293-2-teawaterz@linux.alibaba.comSigned-off-by:
Hui Zhu <teawaterz@linux.alibaba.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Hui Zhu authored
As a zpool_driver, zsmalloc can allocate movable memory because it support migate pages. But zbud and z3fold cannot allocate movable memory. Add malloc_support_movable to zpool_driver. If a zpool_driver support allocate movable memory, set it to true. And add zpool_malloc_support_movable check malloc_support_movable to make sure if a zpool support allocate movable memory. Link: http://lkml.kernel.org/r/20190605100630.13293-1-teawaterz@linux.alibaba.comSigned-off-by:
-
Miles Chen authored
Replace "fault_mm" with "vmf" in code comment because commit cfda0526 ("userfaultfd: shmem: add userfaultfd hook for shared memory faults") has changed the prototpye of shmem_getpage_gfp() - pass vmf instead of fault_mm to the function. Before: static int shmem_getpage_gfp(struct inode *inode, pgoff_t index, struct page **pagep, enum sgp_type sgp, gfp_t gfp, struct mm_struct *fault_mm, int *fault_type); After: static int shmem_getpage_gfp(struct inode *inode, pgoff_t index, struct page **pagep, enum sgp_type sgp, gfp_t gfp, struct vm_area_struct *vma, struct vm_fault *vmf, vm_fault_t *fault_type); Link: http://lkml.kernel.org/r/20190816100204.9781-1-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Mike Rapoport authored
madvise_behavior() converts -ENOMEM to -EAGAIN in several places using identical code. Move that code to a common error handling path. No functional changes. Link: http://lkml.kernel.org/r/1564640896-1210-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Acked-by:
Pankaj Gupta <pagupta@redhat.com> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by:
-
Ivan Khoronzhuk authored
The AF_XDP sockets umem mapping interface uses XDP_UMEM_PGOFF_FILL_RING and XDP_UMEM_PGOFF_COMPLETION_RING offsets. These offsets are established already and are part of the configuration interface. But for 32-bit systems, using AF_XDP socket configuration, these values are too large to pass the maximum allowed file size verification. The offsets can be tuned off, but instead of changing the existing interface, let's extend the max allowed file size for sockets. No one has been using this until this patch with 32 bits as without this fix af_xdp sockets can't be used at all, so it unblocks af_xdp socket usage for 32bit systems. All list of mmap cbs for sockets was verified for side effects and all of them contain dummy cb - sock_no_mmap() at this moment, except the following: xsk_mmap() - it's what this fix is needed for. tcp_mmap() - doesn't have obvious issues with pgoff - no any references on it. packet_mmap() - return -EINVAL if it's even set. Link: http://lkml.kernel.org/r/20190812124326.32146-1-ivan.khoronzhuk@linaro.orgSigned-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
-
Wei Yang authored
When addr is out of range of the whole rb_tree, pprev will point to the right-most node. rb_tree facility already provides a helper function, rb_last(), to do this task. We can leverage this instead of reimplementing it. This patch refines find_vma_prev() with rb_last() to make it a little nicer to read. [akpm@linux-foundation.org: little cleanup, per Vlastimil] Link: http://lkml.kernel.org/r/20190809001928.4950-1-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Alexandre Ghiti authored
In order to avoid wasting user address space by using bottom-up mmap allocation scheme, prefer top-down scheme when possible. Before: root@qemuriscv64:~# cat /proc/self/maps 00010000-00016000 r-xp 00000000 fe:00 6389 /bin/cat.coreutils 00016000-00017000 r--p 00005000 fe:00 6389 /bin/cat.coreutils 00017000-00018000 rw-p 00006000 fe:00 6389 /bin/cat.coreutils 00018000-00039000 rw-p 00000000 00:00 0 [heap] 1555556000-155556d000 r-xp 00000000 fe:00 7193 /lib/ld-2.28.so 155556d000-155556e000 r--p 00016000 fe:00 7193 /lib/ld-2.28.so 155556e000-155556f000 rw-p 00017000 fe:00 7193 /lib/ld-2.28.so 155556f000-1555570000 rw-p 00000000 00:00 0 1555570000-1555572000 r-xp 00000000 00:00 0 [vdso] 1555574000-1555576000 rw-p 00000000 00:00 0 1555576000-1555674000 r-xp 00000000 fe:00 7187 /lib/libc-2.28.so 1555674000-1555678000 r--p 000fd000 fe:00 7187 /lib/libc-2.28.so 1555678000-155567a000 rw-p 00101000 fe:00 7187 /lib/libc-2.28.so 155567a000-15556a0000 rw-p 00000000 00:00 0 3fffb90000-3fffbb1000 rw-p 00000000 00:00 0 [stack] After: root@qemuriscv64:~# cat /proc/self/maps 00010000-00016000 r-xp 00000000 fe:00 6389 /bin/cat.coreutils 00016000-00017000 r--p 00005000 fe:00 6389 /bin/cat.coreutils 00017000-00018000 rw-p 00006000 fe:00 6389 /bin/cat.coreutils 2de81000-2dea2000 rw-p 00000000 00:00 0 [heap] 3ff7eb6000-3ff7ed8000 rw-p 00000000 00:00 0 3ff7ed8000-3ff7fd6000 r-xp 00000000 fe:00 7187 /lib/libc-2.28.so 3ff7fd6000-3ff7fda000 r--p 000fd000 fe:00 7187 /lib/libc-2.28.so 3ff7fda000-3ff7fdc000 rw-p 00101000 fe:00 7187 /lib/libc-2.28.so 3ff7fdc000-3ff7fe2000 rw-p 00000000 00:00 0 3ff7fe4000-3ff7fe6000 r-xp 00000000 00:00 0 [vdso] 3ff7fe6000-3ff7ffd000 r-xp 00000000 fe:00 7193 /lib/ld-2.28.so 3ff7ffd000-3ff7ffe000 r--p 00016000 fe:00 7193 /lib/ld-2.28.so 3ff7ffe000-3ff7fff000 rw-p 00017000 fe:00 7193 /lib/ld-2.28.so 3ff7fff000-3ff8000000 rw-p 00000000 00:00 0 3fff888000-3fff8a9000 rw-p 00000000 00:00 0 [stack] [alex@ghiti.fr: v6] Link: http://lkml.kernel.org/r/20190808061756.19712-15-alex@ghiti.fr Link: http://lkml.kernel.org/r/20190730055113.23635-15-alex@ghiti.frSigned-off-by:
Alexandre Ghiti <alex@ghiti.fr> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Luis Chamberlain <mcgrof@kernel.org> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv] Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Alexandre Ghiti authored
mips uses a top-down layout by default that exactly fits the generic functions, so get rid of arch specific code and use the generic version by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT. As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE, use the generic version of arch_randomize_brk since it also fits. Note that this commit also removes the possibility for mips to have elf randomization and no MMU: without MMU, the security added by randomization is worth nothing. Link: http://lkml.kernel.org/r/20190730055113.23635-14-alex@ghiti.frSigned-off-by:
Paul Burton <paul.burton@mips.com> Reviewed-by:
-
Alexandre Ghiti authored
Mips uses TASK_IS_32BIT_ADDR to determine if a task is 32bit, but this define is mips specific and other arches do not have it: instead, use !IS_ENABLED(CONFIG_64BIT) || is_compat_task() condition. Link: http://lkml.kernel.org/r/20190730055113.23635-13-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
This commit simply bumps up to 32MB and 1GB the random offset of brk, compared to 8MB and 256MB, for 32bit and 64bit respectively. Link: http://lkml.kernel.org/r/20190730055113.23635-12-alex@ghiti.frSuggested-by:
-
Alexandre Ghiti authored
mmap base address must be computed wrt stack top address, using TASK_SIZE is wrong since STACK_TOP and TASK_SIZE are not equivalent. Link: http://lkml.kernel.org/r/20190730055113.23635-11-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
This commit takes care of stack randomization and stack guard gap when computing mmap base address and checks if the task asked for randomization. This fixes the problem uncovered and not fixed for arm here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com Link: http://lkml.kernel.org/r/20190730055113.23635-10-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
arm uses a top-down mmap layout by default that exactly fits the generic functions, so get rid of arch specific code and use the generic version by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT. As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE, use the generic version of arch_randomize_brk since it also fits. Note that this commit also removes the possibility for arm to have elf randomization and no MMU: without MMU, the security added by randomization is worth nothing. Note that it is safe to remove STACK_RND_MASK since it matches the default value. Link: http://lkml.kernel.org/r/20190730055113.23635-9-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
mmap base address must be computed wrt stack top address, using TASK_SIZE is wrong since STACK_TOP and TASK_SIZE are not equivalent. Link: http://lkml.kernel.org/r/20190730055113.23635-8-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
This commit takes care of stack randomization and stack guard gap when computing mmap base address and checks if the task asked for randomization. This fixes the problem uncovered and not fixed for arm here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com Link: http://lkml.kernel.org/r/20190730055113.23635-7-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
This commits selects ARCH_HAS_ELF_RANDOMIZE when an arch uses the generic topdown mmap layout functions so that this security feature is on by default. Note that this commit also removes the possibility for arm64 to have elf randomization and no MMU: without MMU, the security added by randomization is worth nothing. Link: http://lkml.kernel.org/r/20190730055113.23635-6-alex@ghiti.frSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
-
Alexandre Ghiti authored
arm64 handles top-down mmap layout in a way that can be easily reused by other architectures, so make it available in mm. It then introduces a new config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT that can be set by other architectures to benefit from those functions. Note that this new config depends on MMU being enabled, if selected without MMU support, a warning will be thrown. Link: http://lkml.kernel.org/r/20190730055113.23635-5-alex@ghiti.frSigned-off-by:
Christoph Hellwig <hch@infradead.org> Acked-by:
-
Alexandre Ghiti authored
Do not offset mmap base address because of stack randomization if current task does not want randomization. Note that x86 already implements this behaviour. Link: http://lkml.kernel.org/r/20190730055113.23635-4-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
Each architecture has its own way to determine if a task is a compat task, by using is_compat_task in arch_mmap_rnd, it allows more genericity and then it prepares its moving to mm/. Link: http://lkml.kernel.org/r/20190730055113.23635-3-alex@ghiti.frSigned-off-by:
-
Alexandre Ghiti authored
Patch series "Provide generic top-down mmap layout functions", v6. This series introduces generic functions to make top-down mmap layout easily accessible to architectures, in particular riscv which was the initial goal of this series. The generic implementation was taken from arm64 and used successively by arm, mips and finally riscv. Note that in addition the series fixes 2 issues: - stack randomization was taken into account even if not necessary. - [1] fixed an issue with mmap base which did not take into account randomization but did not report it to arm and mips, so by moving arm64 into a generic library, this problem is now fixed for both architectures. This work is an effort to factorize architecture functions to avoid code duplication and oversights as in [1]. [1]: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1429066.html This patch (of 14): This preparatory commit moves this function so that further introduction of generic topdown mmap layout is contained only in mm/util.c. Link: http://lkml.kernel.org/r/20190730055113.23635-2-alex@ghiti.frSigned-off-by:
-
Song Liu authored
After all uprobes are removed from the huge page (with PTE pgtable), it is possible to collapse the pmd and benefit from THP again. This patch does the collapse by calling collapse_pte_mapped_thp(). Link: http://lkml.kernel.org/r/20190815164525.1848545-7-songliubraving@fb.comSigned-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
kbuild test robot <lkp@intel.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Song Liu authored
khugepaged needs exclusive mmap_sem to access page table. When it fails to lock mmap_sem, the page will fault in as pte-mapped THP. As the page is already a THP, khugepaged will not handle this pmd again. This patch enables the khugepaged to retry collapse the page table. struct mm_slot (in khugepaged.c) is extended with an array, containing addresses of pte-mapped THPs. We use array here for simplicity. We can easily replace it with more advanced data structures when needed. In khugepaged_scan_mm_slot(), if the mm contains pte-mapped THP, we try to collapse the page table. Since collapse may happen at an later time, some pages may already fault in. collapse_pte_mapped_thp() is added to properly handle these pages. collapse_pte_mapped_thp() also double checks whether all ptes in this pmd are mapping to the same THP. This is necessary because some subpage of the THP may be replaced, for example by uprobe. In such cases, it is not possible to collapse the pmd. [kirill.shutemov@linux.intel.com: add comments for retract_page_tables()] Link: http://lkml.kernel.org/r/20190816145443.6ard3iilytc6jlgv@box Link: http://lkml.kernel.org/r/20190815164525.1848545-6-songliubraving@fb.comSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
-
