- 13 May, 2018 1 commit
-
-
Changbin Du authored
The disable_warn_untrack never prevent gvt from printing untracked mmio errors. We were disturbed by this error storm and the fix is just adding them to the list with no essential new change. This message is only useful for enabling new platform during developing process. So lower the message level to debug and then remove disable_warn_untrack. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 23 Apr, 2018 5 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1466154 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com>
-
Gustavo A. R. Silva authored
The checks are misleading and not required [1]. [1] https://lkml.org/lkml/2018/3/19/1792 Addresses-Coverity-ID: 1466017 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Zhao Yan authored
For perfomance purpose, scanning of non-privileged batch buffer is turned off by default. But for debugging purpose, it can be turned on via debugfs. After scanning, we submit the original non-privileged batch buffer into hardware, so that the scanning is only a peeking window of guest submitted commands and will not affect the execution results. v4: - refine debugfs print format&content (zhenyu wang) - print engine id instread of engine name to prevent potential memory leak in debugfs warning message. (zhenyu wang) v3: - change vgpu->scan_nonprivbb from type bool to u32, so it is able to selectively turn on/off scanning of non-privileged batch buffer on engine level. e.g. if vgpu->scan_nonprivbb=3, then it will scan non-privileged batch buffer on engine 0 and 1. - in debugfs interface to set vgpu->scan_nonprivbb, print warning message to warn user and explicitly tell state change in kernel log (zhenyu wang) v2: - rebase - update comments for start_gma_offset (henry) Signed-off-by:
Zhao Yan <yan.y.zhao@intel.com> Reviewed-by:
-
Zhipeng Gong authored
When there is only one vGPU in GVT-g and it submits workloads continuously, it will not be scheduled out, vgpu_update_timeslice is not called and its sched_in_time is not updated in a long time, which can be several seconds or longer. Once GVT-g pauses to submit workload for this vGPU due to heavy host CPU workload, this vGPU get scheduled out and vgpu_update_timeslice is called, its left_ts will be subtract by a big value from sched_out_time - sched_in_time. When GVT-g is going to submit workload for this vGPU again, it will not be scheduled in until gvt_balance_timeslice reaches stage 0 and reset its left_ts, which introduces several hunderand milliseconds latency. This patch updates time slice in every ms to update sched_in_time timely. v2: revise commit message v3: use more concise expr. (Zhenyu) Signed-off-by:
Zhipeng Gong <zhipeng.gong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Min He <min.he@intel.com> Signed-off-by:
-
Zhipeng Gong authored
intel_gvt_schedule check timer through a counter and is supposed to wake up to increase the counter every ms. In a system with heavy workload, gvt_service_thread can not get a chance to run right after wake up and will be delayed several milliseconds. As a result, one hundred counter interval means several hundred milliseconds in real time. This patch use real time instead of counter to do timer check. v2: remove static variable. (Zhenyu) v3: correct expire_time update. (Zhenyu) Signed-off-by:
-
- 13 Apr, 2018 2 commits
-
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Mika Kuoppala authored
Evidence indicates that Cannonlake HWSP is not coherent as it should. Revert to using mmio access for now. Testcase: igt/gem_ctx_switch References: https://bugs.freedesktop.org/show_bug.cgi?id=105888 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
-
- 12 Apr, 2018 2 commits
-
-
Jani Nikula authored
No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Jani Nikula authored
The VBT contains the DDC pin to use for specific ports. Alas, sometimes the field appears to contain bogus data, and while we check for it later on in intel_gmbus_get_adapter() we fail to check the returned NULL on errors. Oops results. The simplest approach seems to be to catch and ignore the bogus DDC pins already at the VBT parsing phase, reverting to fixed per port default pins. This doesn't guarantee display working, but at least it prevents the oops. And we continue to be fuzzed by VBT. One affected machine is Dell Latitude 5590 where a BIOS upgrade added invalid DDC pins. Typical backtrace: [ 35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin)) [ 35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461450] Workqueue: events_unbound async_run_entry_fn [ 35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286 [ 35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960 [ 35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246 [ 35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000 [ 35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000 [ 35.461477] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461486] Call Trace: [ 35.461501] intel_hdmi_set_edid+0x37/0x27f [i915] [ 35.461515] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461518] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461521] drm_setup_crtcs+0x129/0xa6a [ 35.461523] ? __switch_to_asm+0x34/0x70 [ 35.461525] ? __switch_to_asm+0x34/0x70 [ 35.461527] ? __switch_to_asm+0x40/0x70 [ 35.461528] ? __switch_to_asm+0x34/0x70 [ 35.461529] ? __switch_to_asm+0x40/0x70 [ 35.461531] ? __switch_to_asm+0x34/0x70 [ 35.461532] ? __switch_to_asm+0x40/0x70 [ 35.461534] ? __switch_to_asm+0x34/0x70 [ 35.461536] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461538] ? __switch_to_asm+0x40/0x70 [ 35.461541] ? _cond_resched+0x10/0x33 [ 35.461557] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461560] async_run_entry_fn+0x2e/0xf5 [ 35.461563] process_one_work+0x15b/0x364 [ 35.461565] worker_thread+0x2c/0x3a0 [ 35.461567] ? process_one_work+0x364/0x364 [ 35.461568] kthread+0x10c/0x122 [ 35.461570] ? _kthread_create_on_node+0x5d/0x5d [ 35.461572] ret_from_fork+0x35/0x40 [ 35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00 [ 35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461606] ---[ end trace 4fe1e63e2dd93373 ]--- [ 35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 35.461613] IP: i2c_transfer+0x4/0x86 [ 35.461614] PGD 0 P4D 0 [ 35.461616] Oops: 0000 [#1] SMP PTI [ 35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G W 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461628] Workqueue: events_unbound async_run_entry_fn [ 35.461630] RIP: 0010:i2c_transfer+0x4/0x86 [ 35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246 [ 35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001 [ 35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000 [ 35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002 [ 35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07 [ 35.461641] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461649] Call Trace: [ 35.461652] drm_do_probe_ddc_edid+0xb3/0x128 [ 35.461654] drm_get_edid+0xe5/0x38d [ 35.461669] intel_hdmi_set_edid+0x45/0x27f [i915] [ 35.461684] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461687] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461689] drm_setup_crtcs+0x129/0xa6a [ 35.461691] ? __switch_to_asm+0x34/0x70 [ 35.461693] ? __switch_to_asm+0x34/0x70 [ 35.461694] ? __switch_to_asm+0x40/0x70 [ 35.461696] ? __switch_to_asm+0x34/0x70 [ 35.461697] ? __switch_to_asm+0x40/0x70 [ 35.461698] ? __switch_to_asm+0x34/0x70 [ 35.461700] ? __switch_to_asm+0x40/0x70 [ 35.461701] ? __switch_to_asm+0x34/0x70 [ 35.461703] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461705] ? __switch_to_asm+0x40/0x70 [ 35.461707] ? _cond_resched+0x10/0x33 [ 35.461724] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461727] async_run_entry_fn+0x2e/0xf5 [ 35.461729] process_one_work+0x15b/0x364 [ 35.461731] worker_thread+0x2c/0x3a0 [ 35.461733] ? process_one_work+0x364/0x364 [ 35.461734] kthread+0x10c/0x122 [ 35.461736] ? _kthread_create_on_node+0x5d/0x5d [ 35.461738] ret_from_fork+0x35/0x40 [ 35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65 [ 35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30 [ 35.461757] CR2: 0000000000000010 [ 35.461759] ---[ end trace 4fe1e63e2dd93374 ]--- Based on a patch by Fei Li. v2: s/reverting/sticking/ (Chris) Cc: stable@vger.kernel.org Cc: Fei Li <fei.li@intel.com> Co-developed-by:
Fei Li <fei.li@intel.com> Reported-by:
Pavel Nakonechnyi <zorg1331@gmail.com> Reported-and-tested-by:
Seweryn Kokot <sewkokot@gmail.com> Reported-and-tested-by:
Laszlo Valko <valko@linux.karinthy.hu> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961Reviewed-by:
-
- 11 Apr, 2018 5 commits
-
-
Oscar Mateo authored
There are different kind of workarounds (those that modify registers that live in the context image, those that modify global registers, those that whitelist registers, etc...) and they have different requirements in terms of where they are applied and how. Also, by splitting them apart, it should be easier to decide where a new workaround should go. v2: - Add multiple MISSING_CASE - Rebased v3: - Rename mmio_workarounds to gt_workarounds (Chris, Mika) - Create empty placeholders for BDW and CHV GT WAs - Rebased v4: Rebased v5: - Rebased - FORCE_TO_NONPRIV register exists since BDW, so make a path for it to achieve universality, even if empty (Chris) Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Oscar Mateo authored
This has grown to be a sizable amount of code, so move it to its own file before we try to refactor anything. For the moment, we are leaving behind the WA BB code and the WAs that get applied (incorrectly) in init_clock_gating, but we will deal with it later. v2: Use intel_ prefix for code that deals with the hardware (Chris) v3: Rebased v4: - Rebased - New license header v5: - Rebased - Added some organisational notes to the file (Chris) v6: Include DOC section in the documentation build (Jani) Signed-off-by:
-
Chris Wilson authored
We can refine our current execlists->queue_priority if we inspect ELSP[1] rather than the head of the unsubmitted queue. Currently, we use the unsubmitted queue and say that if a subsequent request is more important than the current queue, we will rerun the submission tasklet to evaluate the need for preemption. However, we only want to preempt if we need to jump ahead of a currently executing request in ELSP. The second reason for running the submission tasklet is amalgamate requests into the active context on ELSP[0] to avoid a stall when ELSP[0] drains. (Though repeatedly amalgamating requests into the active context and triggering many lite-restore is off question gain, the goal really is to put a context into ELSP[1] to cover the interrupt.) So if instead of looking at the head of the queue, we look at the context in ELSP[1] we can answer both of the questions more accurately -- we don't need to rerun the submission tasklet unless our new request is important enough to feed into, at least, ELSP[1]. v2: Add some comments from the discussion with Tvrtko. v3: More commentary to cross-reference queue_request() References: f6322edd ("drm/i915/preemption: Allow preemption between submission ports") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411103929.27374-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Apparently caused by a merge fail at some point. Due to the nature of the duplicated block, the second one will have no effect, and there's no need to backport. Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests on some CI machines I have concluded that: a) the PMU readout of RC6 can race against runtime PM transitions, and b) there are other reasons than being runtime suspended which can cause intel_runtime_pm_get_if_in_use to fail. Therefore when estimating RC6 the code needs to assert we are indeed in suspended state, and if not, the best we can do is return the last known RC6 value. Without this check we can calculate the estimated value based on un- initialized or inappropriate internal state, which can result in over- estimation, or in any case incorrect value being returned. v2: * Re-arrange the code a bit to avoid second unlock and return branch. (Chris Wilson) v3: * Insert some strategic blank lines and improve commit msg. (Chris Wilson) Signed-off-by:
-
- 10 Apr, 2018 5 commits
-
-
Chris Wilson authored
%phn is not a valid specifier, and the trailing 'n' is being eaten by the format-specifier and defaulting to the ' ' separator. Avoid angering smatch by using the unknown specifier, and use the default we expect. drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:669 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:679 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:693 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:707 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:727 ct_process_request() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:803 ct_handle_request() warn: '%ph' cannot be followed by 'n' Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180410111417.27563-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Resetting the GPU doesn't affect the RPS/RC6 state, so we can stop forcibly reloading the registers. Ville suggested this many moons ago, I said at that time that sanitizing was no harm and meant that our bookkeeping was kept consistent with the HW. However, in a forthcoming series, we want to split rps/rc6 GT powermanagement and one of the key simplifications is the control of when we enable it. Performing a crude sanitize in the middle of i915_gem_reset() is then a huge wart. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180410133354.13425-1-chris@chris-wilson.co.uk
-
Maarten Lankhorst authored
Adding a i915_fifo_underrun_reset debugfs file will make it possible for IGT tests to clear FIFO underrun fallout at the start of each subtest, and make re-enable FBC so tests always have maximum exposure to features used by IGT. FIFO underruns and FBC bugs will no longer hide when an earlier subtests disables both. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=105685 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105681 Link: https://patchwork.freedesktop.org/patch/msgid/20180328100526.36467-1-maarten.lankhorst@linux.intel.comAcked-by:
Jani Nikula <jani.nikula@linux.intel.com> [mlankhorst: Reset FBC reason if underrun had occurred. (vivijim)] Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
Inside the psr work function, we want to wait for PSR to idle first and wish to do so without blocking the normal modeset path, so we do so without holding the PSR lock. However, we first have to find which pipe PSR was enabled on, which requires chasing into the PSR struct and requires locking to prevent intel_psr_disable() from concurrently setting our pointer to NULL. Fixes: 995d3047 ("drm/i915: VLV/CHV PSR Software timer mode") Signed-off-by:
Jose Roberto de Souza <jose.souza@intel.com> Acked-by:
-
Imre Deak authored
On GLK sporadic timeouts occur during PHY0 enabling. Based on logs it looks like they happen sometime after a system suspend/resume cycle, with the same power well enabling succeeding both before and after the failed one and no other problems observed. The current timeout in the code is not actually specified by BSpec, so let's try to increase that until a BSpec update. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180409122716.4055-1-imre.deak@intel.comReviewed-by:
-
- 09 Apr, 2018 19 commits
-
-
Maarten Lankhorst authored
All the references to get_existing_state can be converted to get_new_state or get_old_state, which means that i915 is now get_existing_state free. Signed-off-by:
-
Maarten Lankhorst authored
get_existing_crtc_state is currently unused, get rid of it. Signed-off-by:
-
Maarten Lankhorst authored
The get_existing macros are deprecated and should be replaced by get_old/new_state for clarity. Signed-off-by:
-
Tvrtko Ursulin authored
Include fence context and seqno in low level tracing so it is easier to follow flows of individual requests when things go bad. Also added tracing on the reset side of things. v2: Chris Wilson: * Standardize global_seqno and seqno as global. * Include current hws seqno in execlists_cancel_port_requests. v3: * Fix port printk format for all builds. Signed-off-by:
-
Tvrtko Ursulin authored
Enclose for_each_engine_masked macro arguments in parentheses. v2: * Fixup whitespace to satisfy checkpatch. * Likewise reformat to 80 chars. Signed-off-by:
-
Chandra Konduru authored
This patch updates scaler max limit support for NV12 v2: Rebased (me) v3: Rebased (me) v4: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v5: Addressed review comments from Ville and rebased - calculation of max_scale to be made less convoluted by splitting it up a bit - Indentation errors to be fixed in the series v6: Rebased (me) Fixed review comments from Paauwe, Bob J Previous version, where a split of calculation was done, was wrong. Fixed that issue here. v7: Rebased (me) v8: Rebased (me) v9: Rebased (me) v10: Rebased (me) v11: Addressed review comments from Shashank Sharma Alignment issues fixed. When call to skl_update_scaler is made, 0 was being sent instead of pixel_format. When crtc update scaler is called, we dont have the fb to derive the pixel format. Added the function parameter bool plane_scaler_check to account for this. v12: Fixed failure in IGT debugfs_test. fb is NULL in skl_update_scaler_plane Due to this, accessing fb->format caused failure. Patch checks fb before using. v13: In the previous version there was a flaw. In skl_update_scaler during plane_scaler_check if the format was non-NV12, it would set need_scaling to false. This could reset the previously set need_scaling from a previous condition check. Patch fixes this. Patch also adds minimum src height for YUV 420 formats to 16 (as defined in BSpec) and adds for checking this range. v14: Addressed review comments from Maarten Just add a check for NV12 min src height in skl_update_scaler and retain the remaining checks as is. Added Reviewed By from Juha-Pekka Heikkila. v15: Rebased the series. v16: Changed fb height restriction to be >= 16 as per Bspec. Earlier it was > 16. v17: Adding src width and height to be mult of 4 restriction to avoid pipe fifo underruns for NV12. Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by:
Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
Chandra Konduru <chandra.konduru@intel.com> Signed-off-by:
Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
-
Chandra Konduru authored
This patch adds NV12 to format_is_yuv() function for sprite planes. v2: -Use intel_ prefix for format_is_yuv (Ville) v3: Rebased (me) v4: Rebased and addressed review comments from Clinton A Taylor. "static function in intel_sprite.c is not available to the primary plane functions". Changed commit message - function modified for sprite planes. v5: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v6: Rebased (me) v7: Rebased (me) v8: Rebased (me) v9: Rebased (me) v10: Changed intel_format_is_yuv function from static to non-static. We need to use it later from other files for check. v11: Rebased the patch. format_is_yuv has already been renamed to intel_format_is_yuv in the color patch series which is already merged. This function which was previously static has already been made non-static. So this patch after rebase just adds NV12 to intel_format_is_yuv function. v12: Added reviewed by from Juha-Pekka Heikkila v13/v14/v15: Rebased the series Tested-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Chandra Konduru authored
This patch sets appropriate scaler mode for NV12 format. In this mode, skylake scaler does either chroma-upsampling or chroma-upsampling and resolution scaling v2: Review comments from Ville addressed NV12 case to be checked first for setting the scaler v3: Rebased (me) v4: Rebased (me) v5: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v6: Rebased (me) v7: Rebased (me) v8: Rebased (me) Restricting the NV12 change for scaler to BXT and KBL in this series. v9: Rebased (me) v10: As of now, NV12 has been tested on Gen9 and Gen10. However, code is applicable to all GEN >= 9. Hence making that change to keep it generic. Comments under v8 is not valid anymore. v11: Addressed review comments by Shashank Sharma. For Gen10+, the scaler mode to be set it planar or normal (single bit). Changed the code to be applicable to all Gen. v12: Addressed review comments from Shashank Sharma For Gen9 (apart from GLK) bits 28:29 to be programmed in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set for all Planar. v13: Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" Adding Reviewed by tag from Shashank Shamr v14: Added reviewed by from Juha-Pekka Heikkila v15: Rebased the series Tested-by:
-
Vidya Srinivas authored
If the fb format is YUV, enable the plane CSC mode bits for the conversion. v2: Addressed review comments from Shashank Sharma Alignment issue fixed in i915_reg.h v3: Adding Reviewed By from Shashank Sharma v4: Rebased the patch. As part of rebasing, re-using the color series defines which are already merged. plane_state->base.color_encoding might not be set for NV12. For now, just using PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 in glk_plane_color_ctl if format is NV12. v5: Added reviewed by from Juha-Pekka Heikkila v6: Rebased the series Reviewed-by:
-
Vidya Srinivas authored
Display WA 827 applies to GEN9 (excluede GLK) and CNL. Switching the plane format from NV12 to RGB and leaving system idle results in display underrun and corruption. WA: Set the bit 15 & bit 19 to 1b in the CLKGATE_DIS_PSL register for the pipe in which NV12 plane is enabled. v2: Addressed review comments from Maarten and Juha-Pekka Heikkila. Added reviewed by from Juha-Pekka Heikkila. v3: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
This patch splits skl_compute_wm/ddb functions into two parts. One adds all affected pipes after the commit to atomic_state structure and second part does compute the DDB. v2: Added reviewed by tag from Shashank Sharma v3: Added reviewed by from Juha-Pekka Heikkila v4: Rebased the series v5: Fixed checkpatch error. Changed *changed = true to (*changed) = true; Reviewed-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Mahesh Kumar authored
Display Workaround #0826 (SKL:ALL BXT:ALL) & #1059(CNL:A) Hardware sometimes fails to wake memory from pkg C states fetching the last few lines of planar YUV 420 (NV12) planes. This causes intermittent underflow and corruption. WA: Disable package C states or do not enable latency levels 1 through 7 (WM1 - WM7) on NV12 planes. v2: Addressed review comments by Maarten. v3: Adding reviewed by tag from Shashank Sharma v4: Added reviewed by from Juha-Pekka Heikkila v5: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
DDB allocation optimization algorithm requires/assumes ddb allocation for any memory C-state level DDB value to be as high as level below the current level. Render decompression requires level WM to be as high as wm level-0. This patch fulfils both the requirements. v2: Changed plane_num to plane_id in skl_compute_wm_levels v3: Addressed review comments from Shashank Sharma Changed the commit message "statement can be more clear, "DDB value to be as high as level below " what is level below ?" v4: Added reviewed by tag from Shashank Sharma v5: Added reviewed by from Juha-Pekka Heikkila v6: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
This patch passes skl_wm_level structure itself to watermark computation function skl_compute_plane_wm function (instead of its internal parameters). It reduces number of arguments required to be passed. v2: Addressed review comments by Shashank Sharma v3: Adding reviewed by tag from Shashank Sharma v4: Added reviewed by from Juha-Pekka Heikkila v5: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
NV12 requires WM calculation for UV plane as well. UV plane WM should also fulfill all the WM related restrictions. v2: Addressed review comments from Shashank Sharma. v3: Addressed review comments from Shashank Sharma Changed plane_num to plane_id in skl_compute_plane_wm_params and skl_compute_plane_wm. Adding reviewed by tag from Shashank Sharma v4: Added reviewed by from Juha-Pekka Heikkila v5: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
For YUV 420 Planar formats like NV12, buffer allocation is done for Y and UV surfaces separately. For NV12 plane formats, the UV buffer allocation must be programmed in the Plane Buffer Config register and the Y buffer allocation must be programmed in the Plane NV12 Buffer Config register. Both register values should be verified during verify_wm_state. v2: Addressed review comments by Maarten. v3: Addressed review comments by Shashank Sharma. v4: Adding reviewed by tag from Shashank Sharma v5: Added reviewed by from Juha-Pekka Heikkila v6: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
Add support of recognizing DRM_FORMAT_NV12 from plane_format register value. v2: Added reviewed by tag from Mika Kahola v3: Added reviewed by from Juha-Pekka Heikkila v4: Rebased the series Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Mahesh Kumar authored
Current code calculates DDB for planar formats in such a way that we store DDB of plane-0 in plane 1 & vice-versa. In order to make this clean this patch refactors WM/DDB calculation for NV12 planar formats. v2: Addressed review comments by Maarten v3: Rebased and addressed review comments by Maarten v4: Fixed a compilation issue of string replacement is_nv12 to is_planar v5: Added reviewed by from Juha-Pekka Heikkila v6: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
skl_wm_values struct contains values of pipe/plane DDB only. so rename it for better readability of code. Similarly skl_copy_wm_for_pipe copies DDB values. s/skl_wm_values/skl_ddb_values s/skl_copy_wm_for_pipe/skl_copy_ddb_for_pipe Changes since V1: - also change name of skl_copy_wm_for_pipe v2: Added reviewed by from Juha-Pekka Heikkila v3: Rebased the series Reviewed-by:
-
- 07 Apr, 2018 1 commit
-
-
Lyude Paul authored
When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab3 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
-
