commit acf5e051 upstream.

This patch adds the resources and DMI ID's for the MEN SC31,
which uses a different address region to map the LPC bus than
the one used for the existing SC24.
Signed-off-by: Michael Moese <michael.moese@men.de>
[jth add stable tag]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4b5dde2d upstream.

mwifiex records information about various channels as it receives scan
information. It does this by appending to a buffer that was sized
to the max number of supported channels on any band, but there are
numerous problems:

(a) scans can return info from more than one band (e.g., both 2.4 and 5
    GHz), so the determined "max" is not large enough
(b) some firmware appears to return multiple results for a given
    channel, so the max *really* isn't large enough
(c) there is no bounds checking when stashing these stats, so problems
    (a) and (b) can easily lead to buffer overflows

Let's patch this by setting a slightly-more-correct max (that accounts
for a combination of both 2.4G and 5G bands) and adding a bounds check
when writing to our statistics buffer.

Due to problem (b), we still might not properly report all known survey
information (e.g., with "iw <dev> survey dump"), since duplicate results
(or otherwise "larger than expected" results) will cause some
truncation. But that's a problem for a future bugfix.

(And because of this known deficiency, only log the excess at the WARN
level, since that isn't visible by default in this driver and would
otherwise be a bit too noisy.)

Fixes: bf354433 ("mwifiex: channel statistics support for mwifiex")
Cc: Avinash Patil <patila@marvell.com>
Cc: Xinming Hu <huxm@marvell.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 55acdd92 upstream.

Can be reproduced when running dlm_controld (tested on 4.4.x, 4.12.4):
 # seq 1 100 | xargs -P0 -n1 dlm_tool join
 # seq 1 100 | xargs -P0 -n1 dlm_tool leave

misc_register fails due to duplicate sysfs entry, which causes
dlm_device_register to free ls->ls_device.name.
In dlm_device_deregister the name was freed again, causing memory
corruption.

According to the comment in dlm_device_deregister the name should've been
set to NULL when registration fails,
so this patch does that.

sysfs: cannot create duplicate filename '/dev/char/10:1'
------------[ cut here ]------------
warning: cpu: 1 pid: 4450 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x56/0x70
modules linked in: msr rfcomm dlm ccm bnep dm_crypt uvcvideo
videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev
btusb media btrtl btbcm btintel bluetooth ecdh_generic intel_rapl
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm
snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel thinkpad_acpi pcbc nvram snd_seq_midi
snd_seq_midi_event aesni_intel snd_hda_codec_realtek snd_hda_codec_generic
snd_rawmidi aes_x86_64 crypto_simd glue_helper snd_hda_intel snd_hda_codec
cryptd intel_cstate arc4 snd_hda_core snd_seq snd_seq_device snd_hwdep
iwldvm intel_rapl_perf mac80211 joydev input_leds iwlwifi serio_raw
cfg80211 snd_pcm shpchp snd_timer snd mac_hid mei_me lpc_ich mei soundcore
sunrpc parport_pc ppdev lp parport autofs4 i915 psmouse
 e1000e ahci libahci i2c_algo_bit sdhci_pci ptp drm_kms_helper sdhci
pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video
cpu: 1 pid: 4450 comm: dlm_test.exe not tainted 4.12.4-041204-generic
hardware name: lenovo 232425u/232425u, bios g2et82ww (2.02 ) 09/11/2012
task: ffff96b0cbabe140 task.stack: ffffb199027d0000
rip: 0010:sysfs_warn_dup+0x56/0x70
rsp: 0018:ffffb199027d3c58 eflags: 00010282
rax: 0000000000000038 rbx: ffff96b0e2c49158 rcx: 0000000000000006
rdx: 0000000000000000 rsi: 0000000000000086 rdi: ffff96b15e24dcc0
rbp: ffffb199027d3c70 r08: 0000000000000001 r09: 0000000000000721
r10: ffffb199027d3c00 r11: 0000000000000721 r12: ffffb199027d3cd1
r13: ffff96b1592088f0 r14: 0000000000000001 r15: ffffffffffffffef
fs:  00007f78069c0700(0000) gs:ffff96b15e240000(0000)
knlgs:0000000000000000
cs:  0010 ds: 0000 es: 0000 cr0: 0000000080050033
cr2: 000000178625ed28 cr3: 0000000091d3e000 cr4: 00000000001406e0
call trace:
 sysfs_do_create_link_sd.isra.2+0x9e/0xb0
 sysfs_create_link+0x25/0x40
 device_add+0x5a9/0x640
 device_create_groups_vargs+0xe0/0xf0
 device_create_with_groups+0x3f/0x60
 ? snprintf+0x45/0x70
 misc_register+0x140/0x180
 device_write+0x6a8/0x790 [dlm]
 __vfs_write+0x37/0x160
 ? apparmor_file_permission+0x1a/0x20
 ? security_file_permission+0x3b/0xc0
 vfs_write+0xb5/0x1a0
 sys_write+0x55/0xc0
 ? sys_fcntl+0x5d/0xb0
 entry_syscall_64_fastpath+0x1e/0xa9
rip: 0033:0x7f78083454bd
rsp: 002b:00007f78069bbd30 eflags: 00000293 orig_rax: 0000000000000001
rax: ffffffffffffffda rbx: 0000000000000006 rcx: 00007f78083454bd
rdx: 000000000000009c rsi: 00007f78069bee00 rdi: 0000000000000005
rbp: 00007f77f8000a20 r08: 000000000000fcf0 r09: 0000000000000032
r10: 0000000000000024 r11: 0000000000000293 r12: 00007f78069bde00
r13: 00007f78069bee00 r14: 000000000000000a r15: 00007f78069bbd70
code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 2c c8
ff ff 4c 89 e2 48 89 de 48 c7 c7 b0 8e 0c a8 e8 41 e8 ed ff <0f> ff 48 89
df e8 00 d5 f4 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace 40412246357cc9e0 ]---

dlm: 59f24629-ae39-44e2-9030-397ebc2eda26: leaving the lockspace group...
bug: unable to handle kernel null pointer dereference at 0000000000000001
ip: [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140
pgd 0
oops: 0000 [#1] smp
modules linked in: dlm 8021q garp mrp stp llc openvswitch nf_defrag_ipv6
nf_conntrack libcrc32c iptable_filter dm_multipath crc32_pclmul dm_mod
aesni_intel psmouse aes_x86_64 sg ablk_helper cryptd lrw gf128mul
glue_helper i2c_piix4 nls_utf8 tpm_tis tpm isofs nfsd auth_rpcgss
oid_registry nfs_acl lockd grace sunrpc xen_wdt ip_tables x_tables autofs4
hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic pata_acpi 8139too
serio_raw ata_piix 8139cp mii uhci_hcd ehci_pci ehci_hcd libata
scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_mod ipv6
cpu: 0 pid: 394 comm: systemd-udevd tainted: g w 4.4.0+0 #1
hardware name: xen hvm domu, bios 4.7.2-2.2 05/11/2017
task: ffff880002410000 ti: ffff88000243c000 task.ti: ffff88000243c000
rip: e030:[<ffffffff811a3b4a>] [<ffffffff811a3b4a>]
kmem_cache_alloc+0x7a/0x140
rsp: e02b:ffff88000243fd90 eflags: 00010202
rax: 0000000000000000 rbx: ffff8800029864d0 rcx: 000000000007b36c
rdx: 000000000007b36b rsi: 00000000024000c0 rdi: ffff880036801c00
rbp: ffff88000243fdc0 r08: 0000000000018880 r09: 0000000000000054
r10: 000000000000004a r11: ffff880034ace6c0 r12: 00000000024000c0
r13: ffff880036801c00 r14: 0000000000000001 r15: ffffffff8118dcc2
fs: 00007f0ab77548c0(0000) gs:ffff880036e00000(0000) knlgs:0000000000000000
cs: e033 ds: 0000 es: 0000 cr0: 0000000080050033
cr2: 0000000000000001 cr3: 000000000332d000 cr4: 0000000000040660
stack:
ffffffff8118dc90 ffff8800029864d0 0000000000000000 ffff88003430b0b0
ffff880034b78320 ffff88003430b0b0 ffff88000243fdf8 ffffffff8118dcc2
ffff8800349c6700 ffff8800029864d0 000000000000000b 00007f0ab7754b90
call trace:
[<ffffffff8118dc90>] ? anon_vma_fork+0x60/0x140
[<ffffffff8118dcc2>] anon_vma_fork+0x92/0x140
[<ffffffff8107033e>] copy_process+0xcae/0x1a80
[<ffffffff8107128b>] _do_fork+0x8b/0x2d0
[<ffffffff81071579>] sys_clone+0x19/0x20
[<ffffffff815a30ae>] entry_syscall_64_fastpath+0x12/0x71
] code: f6 75 1c 4c 89 fa 44 89 e6 4c 89 ef e8 a7 e4 00 00 41 f7 c4 00 80
00 00 49 89 c6 74 47 eb 32 49 63 45 20 48 8d 4a 01 4d 8b 45 00 <49> 8b 1c
06 4c 89 f0 65 49 0f c7 08 0f 94 c0 84 c0 74 ac 49 63
rip [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140
rsp <ffff88000243fd90>
cr2: 0000000000000001
--[ end trace 70cb9fd1b164a0e8 ]--
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f7a5e13 upstream.

We have a new PCI subsystem ID for 7265D.  Add it to the list.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a81d72d2 upstream.

T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3494 Rev= 2.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fc81bab5 upstream.

_rtl_pci_find_adapter fail path will jump to label fail3 for
unsupported adapter types.

However, on course for fail3 there will be call rtl_deinit_core
before rtl_init_core.

For the inclusion of checking pci_iounmap this fail can be moved to
fail2.

Fixes
[    4.492963] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi]
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56a91c49 upstream.

On failure drm_atomic_get_private_obj_state() returns and error
pointer instead of NULL. Adjust the checks in the callers to match.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: edb1ed1a ("drm/dp: Add DP MST helpers to atomically find and release vcpi slots")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712155102.26276-1-ville.syrjala@linux.intel.comReviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9afae271 upstream.

When fail to get needed page for pool, need to put allocated pages
into pool. But current code has a miscalculation of allocated pages,
correct it.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 71bb23c7 upstream.

When the caller maps their dmabuf and we return an sg_table, the caller
doesn't expect the pages beneath that sg_table to vanish on a whim (i.e.
under mempressure). The contract is that the pages are pinned for the
duration of the mapping (from dma_buf_map_attachment() to
dma_buf_unmap_attachment). To comply, we need to introduce our own
vgem_object.pages_pin_count and elevate it across the mapping. However,
the drm_prime interface we use calls drv->prime_pin on dma_buf_attach
and drv->prime_unpin on dma_buf_detach, which while that does cover the
mapping is much broader than is desired -- but it will do for now.

v2: also hold the pin across prime_vmap/vunmap
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Testcase: igt/gem_concurrent_blit/*swap*vgem*
Fixes: 5ba6c9ff ("drm/vgem: Fix mmaping")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # needs a backport
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622134617.17912-1-chris@chris-wilson.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f35a7f91 upstream.

The rx ring buffers are added to a hash table if
firmware support full rx reorder. If the full rx
reorder support flag is not set before allocating
the rx ring buffers, none of the buffers are added
to the hash table.

There is a race condition between rx ring refill and
rx buffer replenish from napi poll. The interrupts are
enabled in hif start, before the rx ring is refilled during init.
We replenish buffers from napi poll due to the interrupts which
get enabled after hif start. Hence before the entire rx ring is
refilled during the init, the napi poll replenishes a few buffers
in steps of 100 buffers per attempt. During this rx ring replenish
from napi poll, the rx reorder flag has not been set due to which
the replenished buffers are not added to the hash table

Set the rx full reorder support flag before we allocate
the rx ring buffer to avoid the memory leak.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit efb3669e upstream.

This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-LP.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 84331e13 upstream.

This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-H.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4ae2bd4b upstream.

The global spinlock `l3_remap_lock` is reinitialized every time the
"probe" function `alt_fpga_bridge_probe()` is called.  It should only be
initialized once.  Use `DEFINE_SPINLOCK()` to initialize it statically.

Fixes: e5f8efa5 ("ARM: socfpga: fpga bridge driver support")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-By: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 02729d17 upstream.

There is a mistake here where we accidentally use sizeof(TB_CFG_PKG_RESET)
instead of just TB_CFG_PKG_RESET.  The size of an int is 4 so it's the
same as TB_CFG_PKG_NOTIFY_ACK.

Fixes: d7f781bf ("thunderbolt: Rework control channel to be more reliable")
Reported-by: Colin King <colin.king@canonical.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 972b812b upstream.

caam/qi driver does not compile when DEBUG is enabled
(CRYPTO_DEV_FSL_CAAM_DEBUG=y):

drivers/crypto/caam/caamalg_qi.c: In function 'ablkcipher_done':
drivers/crypto/caam/caamalg_qi.c:794:2: error: implicit declaration of function 'dbg_dump_sg' [-Werror=implicit-function-declaration]
  dbg_dump_sg(KERN_ERR, "dst    @" __stringify(__LINE__)": ",

Since dbg_dump_sg() is shared between caam/jr and caam/qi, move it
in a shared location and export it.

At the same time:
-reduce ifdeferry by providing a no-op implementation for !DEBUG case
-rename it to caam_dump_sg() to be consistent in terms of
exported symbols namespace (caam_*)

Fixes: b189817c ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ed289f7 upstream.

caam/qi driver fails to compile when CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y.
Fix it by making the offending local per_cpu variable global.

Fixes: 67c2315d ("crypto: caam - add Queue Interface (QI) backend support")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 22eb9476 upstream.

On binder_init() the devices string is duplicated and smashed into individual
device names which are passed along. However, the original duplicated string
wasn't freed in case binder_init() failed. Let's free it on error.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d411cbf upstream.

The WACOM_HID_WD_TOUCHRINGSTATUS usage is a single bit which tells us
whether the touchring is currently in use or not. Because we need to
reset the axis value to 0 when the finger is removed, we call
'wacom_map_usage' to ensure that the required type/code values are
associated with the usage. The 'wacom_map_usage' also sets up the axis
range and resolution, however, which is not desired in this particular
case.

Although xf86-input-wacom doesn't do really do anything with the ring's
range or resolution, the libinput driver (for Wayland environments)
uses these values to provide proper angle indications to userspace.

Fixes: 60a22186 ("HID: wacom: generic: add support for touchring")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0f9b011d upstream.

The .release function of driver_ktype is 'driver_release()'.
This function frees the container_of this kobject.

So, this memory must not be freed explicitly in the error handling path of
'bus_add_driver()'. Otherwise a double free will occur.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4744d4e2 upstream.

This driver assumes that the device is operating in the continuous
conversion mode which performs the conversion continuously.  So this driver
inserts a wait time before reading the conversion register if the
configuration is changed from a previous request.

Currently, the wait time is only the period required for a single
conversion that is calculated as the reciprocal of the sampling frequency.
However we also need to wait for the the previous conversion to complete.
Otherwise we probably get the conversion result for the previous
configuration when the sampling frequency is lower.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a6fe5e52 upstream.

pm_runtime_get_sync() and pm_runtime_put_autosuspend() return 0 on
success, 1 if the device's runtime PM status was already requested status
or error code on failure.  So a positive return value doesn't indicate an
error condition.

However, any non-zero return values from buffer preenable and postdisable
callbacks are recognized as an error and this driver reuses the return
value from pm_runtime_get_sync() and pm_runtime_put_autosuspend() in
these callbacks.  This change fixes the false error detections.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 73e3e3fc upstream.

This driver assumes that the device is operating in the continuous
conversion mode which performs the conversion continuously.  So this driver
doesn't insert a wait time before reading the conversion register if the
configuration is not changed from a previous request.

This assumption is broken if the device is runtime suspended and entered
a power-down state.  The forthcoming request causes reading a stale result
from the conversion register as the device is runtime resumed just before.

Fix it by adding a flag to detect that condition and insert a necessary
wait time.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e8245c68 upstream.

The ADS1015 device have two operating modes, continuous conversion mode
and single-shot mode.  This driver assumes that the continuous conversion
mode is selected by runtime resume callback when the ADC result is
requested.

If CONFIG_PM is disabled, the device is always in the default single-shot
mode and no one begins a single conversion.  So the conversion register
doesn't contain valid ADC result.  Fix it by changing the continuous mode
in probe function.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d0e8e79 upstream.

The ti-ads1015 driver supports ADS1015 and ADS1115 devices.  The same
scale information is used for both devices in this driver, however they
have actually different values and the ADS1115's one is not correct.

These devices have the same full-scale input voltage range for each PGA
selection.  So instead of adding another hardcoded scale information,
compute a correct scale on demand from each device's resolution.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0d106b74 upstream.

The ti-ads1015 driver has eight iio voltage channels and each iio channel
can hold own sampling frequency information.

The ADS1015 device only have a single config register which contains an
input multiplexer selection, PGA and data rate settings.  So the driver
should load the correct settings when the input multiplexer selection is
changed.

However, regardless of which channlel is currently selected, changing any
iio channel's sampling frequency information immediately overwrites the
current data rate setting in the config register.

It breaks the current data rate setting if the different channel's sampling
frequency information is changed because the data rate setting is not
reloaded when the input multiplexer is switched.

This removes the unexpected config register update and correctly load the
data rate setting before getting adc result.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 11b86a84 upstream.

Fix the values of DPAA2_FD_CTRL_FSE and DPAA2_FD_CTRL_FAERR,
which are shifted off by one bit.

Fixes: 39163c0c ("staging: fsl-dpaa2/eth: Errors checking update")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 737aed94 upstream.

The crypto API requires saving the last blocks of ciphertext
in req->info for use as IV for CTS mode. The ccree driver
was not doing this. This patch fixes that.

The bug was manifested with cts(cbc(aes)) mode in tcrypt tests.

Fixes: 302ef8eb ("Add CryptoCell skcipher support")
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 34ff1bf4 upstream.

The mask of sns_key_info1 suggests the upper nybble is being extracted
however the following shift of 8 bits is too large and always results in
0.  Fix this by shifting only by 4 bits to correctly get the upper nybble.

Detected by CoverityScan, CID#142891 ("Operands don't affect result")

Fixes: fa590c22 ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ed62ca2f upstream.

While running reboot tests w/ a specific set of USB devices (and
slub_debug enabled), I found that once every few hours my device would
be crashed with a stack that looked like this:

[   14.012445] BUG: spinlock bad magic on CPU#0, modprobe/2091
[   14.012460]  lock: 0xffffffc0cb055978, .magic: ffffffc0, .owner: cryption contexts: %lu/%lu
[   14.012460] /1025536097, .owner_cpu: 0
[   14.012466] CPU: 0 PID: 2091 Comm: modprobe Not tainted 4.4.79 #352
[   14.012468] Hardware name: Google Kevin (DT)
[   14.012471] Call trace:
[   14.012483] [<....>] dump_backtrace+0x0/0x160
[   14.012487] [<....>] show_stack+0x20/0x28
[   14.012494] [<....>] dump_stack+0xb4/0xf0
[   14.012500] [<....>] spin_dump+0x8c/0x98
[   14.012504] [<....>] spin_bug+0x30/0x3c
[   14.012508] [<....>] do_raw_spin_lock+0x40/0x164
[   14.012515] [<....>] _raw_spin_lock_irqsave+0x64/0x74
[   14.012521] [<....>] __wake_up+0x2c/0x60
[   14.012528] [<....>] async_completed+0x2d0/0x300
[   14.012534] [<....>] __usb_hcd_giveback_urb+0xc4/0x138
[   14.012538] [<....>] usb_hcd_giveback_urb+0x54/0xf0
[   14.012544] [<....>] xhci_irq+0x1314/0x1348
[   14.012548] [<....>] usb_hcd_irq+0x40/0x50
[   14.012553] [<....>] handle_irq_event_percpu+0x1b4/0x3f0
[   14.012556] [<....>] handle_irq_event+0x4c/0x7c
[   14.012561] [<....>] handle_fasteoi_irq+0x158/0x1c8
[   14.012564] [<....>] generic_handle_irq+0x30/0x44
[   14.012568] [<....>] __handle_domain_irq+0x90/0xbc
[   14.012572] [<....>] gic_handle_irq+0xcc/0x18c

Investigation using kgdb() found that the wait queue that was passed
into wake_up() had been freed (it was filled with slub_debug poison).

I analyzed and instrumented the code and reproduced.  My current
belief is that this is happening:

1. async_completed() is called (from IRQ).  Moves "as" onto the
   completed list.
2. On another CPU, proc_reapurbnonblock_compat() calls
   async_getcompleted().  Blocks on spinlock.
3. async_completed() releases the lock; keeps running; gets blocked
   midway through wake_up().
4. proc_reapurbnonblock_compat() => async_getcompleted() gets the
   lock; removes "as" from completed list and frees it.
5. usbdev_release() is called.  Frees "ps".
6. async_completed() finally continues running wake_up().  ...but
   wake_up() has a pointer to the freed "ps".

The instrumentation that led me to believe this was based on adding
some trace_printk() calls in a select few functions and then using
kdb's "ftdump" at crash time.  The trace follows (NOTE: in the trace
below I cheated a little bit and added a udelay(1000) in
async_completed() after releasing the spinlock because I wanted it to
trigger quicker):

<...>-2104   0d.h2 13759034us!: async_completed at start: as=ffffffc0cc638200
mtpd-2055    3.... 13759356us : async_getcompleted before spin_lock_irqsave
mtpd-2055    3d..1 13759362us : async_getcompleted after list_del_init: as=ffffffc0cc638200
mtpd-2055    3.... 13759371us+: proc_reapurbnonblock_compat: free_async(ffffffc0cc638200)
mtpd-2055    3.... 13759422us+: async_getcompleted before spin_lock_irqsave
mtpd-2055    3.... 13759479us : usbdev_release at start: ps=ffffffc0cc042080
mtpd-2055    3.... 13759487us : async_getcompleted before spin_lock_irqsave
mtpd-2055    3.... 13759497us!: usbdev_release after kfree(ps): ps=ffffffc0cc042080
<...>-2104   0d.h2 13760294us : async_completed before wake_up(): as=ffffffc0cc638200

To fix this problem we can just move the wake_up() under the ps->lock.
There should be no issues there that I'm aware of.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e18d0c8 upstream.

These will be required going forward.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5cdcf4c6 upstream.

binder_fd_array_object starts with a 4-byte header,
followed by a few fields that are 8 bytes when
ANDROID_BINDER_IPC_32BIT=N.

This can cause alignment issues in a 64-bit kernel
with a 32-bit userspace, as on x86_32 an 8-byte primitive
may be aligned to a 4-byte address. Pad with a __u32
to fix this.
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 082df8be upstream.

Make sure that the controller is runtime resumed when system suspending
to avoid an external abort when accessing the interrupt registers:

  Unhandled fault: external abort on non-linefetch (0x1008) at 0xd025840a
  ...
  [<c05481a4>] (musb_default_readb) from [<c0545abc>] (musb_disable_interrupts+0x84/0xa8)
  [<c0545abc>] (musb_disable_interrupts) from [<c0546b08>] (musb_suspend+0x38/0xb8)
  [<c0546b08>] (musb_suspend) from [<c04a57f8>] (platform_pm_suspend+0x3c/0x64)

This is easily reproduced on a BBB by enabling the peripheral port only
(as the host port may enable the shared clock) and keeping it
disconnected so that the controller is runtime suspended. (Well, you
would also need to the not-yet-merged am33xx-suspend patches by Dave
Gerlach to be able to suspend the BBB.)

This is a regression that was introduced by commit 1c4d0b4e ("usb:
musb: Remove pm_runtime_set_irq_safe") which allowed the parent glue
device to runtime suspend and thereby exposed a couple of older issues:

Register accesses without explicitly making sure the controller is
runtime resumed during suspend was first introduced by commit c338412b
("usb: musb: unconditionally save and restore the context on suspend")
in 3.14.

Commit a1fc1920 ("usb: musb: core: make sure musb is in RPM_ACTIVE on
resume") later started setting the RPM status to active during resume,
and this was also implicitly relying on the parent always being active.
Since commit 71723f95 ("PM / runtime: print error when activating a
child to unactive parent") this now also results in the following
warning:

  musb-hdrc musb-hdrc.0: runtime PM trying to activate child device
    musb-hdrc.0 but parent (47401400.usb) is not active

This patch has been verified on 4.13-rc2, 4.12 and 4.9 using a BBB
(the dsps glue would always be active also in 4.8).

Fixes: c338412b ("usb: musb: unconditionally save and restore the context on suspend")
Fixes: a1fc1920 ("usb: musb: core: make sure musb is in RPM_ACTIVE on resume")
Fixes: 1c4d0b4e ("usb: musb: Remove pm_runtime_set_irq_safe")
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e6b422b8 upstream.

The following commit cause a regression on ATI chipsets.
'commit e788787e ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")'

This causes pinfo->smbus_dev to be wrongly set to NULL on
systems with the ATI chipset that this function checks for first.

Added conditional check for AMD chipsets to avoid the overwriting
pinfo->smbus_dev.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: e788787e ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1279ef7 upstream.

Commit e0429362
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.

Apparently model C920-C has the same issue so applying
the same quirk as well.

See aforementioned commit message for detailed explanation of the problem.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 169e8654 upstream.

This commit adds support (an ID, really) for D-Link DWM-157 hardware
version C1 USB modem to option driver.

According to manufacturer-provided Windows INF file the device has four
serial ports:
"D-Link HSPA+DataCard Diagnostics Interface" (interface 2; modem port),
"D-Link HSPA+DataCard NMEA Device" (interface 3),
"D-Link HSPA+DataCard Speech Port" (interface 4),
"D-Link HSPA+DataCard Debug Port" (interface 5).

usb-devices output:
T:  Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d0e Rev=03.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-157
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit de3af5bf upstream.

Corsair Strafe RGB keyboard has trouble to initialize:

[ 1.679455] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[ 6.871136] usb 3-6: unable to read config index 0 descriptor/all
[ 6.871138] usb 3-6: can't read configurations, error -110
[ 6.991019] usb 3-6: new full-speed USB device number 5 using xhci_hcd
[ 12.246642] usb 3-6: unable to read config index 0 descriptor/all
[ 12.246644] usb 3-6: can't read configurations, error -110
[ 12.366555] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 17.622145] usb 3-6: unable to read config index 0 descriptor/all
[ 17.622147] usb 3-6: can't read configurations, error -110
[ 17.742093] usb 3-6: new full-speed USB device number 7 using xhci_hcd
[ 22.997715] usb 3-6: unable to read config index 0 descriptor/all
[ 22.997716] usb 3-6: can't read configurations, error -110

Although it may work after several times unpluging/pluging:

[ 68.195240] usb 3-6: new full-speed USB device number 11 using xhci_hcd
[ 68.337459] usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b20
[ 68.337463] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 68.337466] usb 3-6: Product: Corsair STRAFE RGB Gaming Keyboard
[ 68.337468] usb 3-6: Manufacturer: Corsair
[ 68.337470] usb 3-6: SerialNumber: 0F013021AEB8046755A93ED3F5001941

Tried three quirks: USB_QUIRK_DELAY_INIT, USB_QUIRK_NO_LPM and
USB_QUIRK_DEVICE_QUALIFIER, user confirmed that USB_QUIRK_DELAY_INIT alone
can workaround this issue. Hence add the quirk for Corsair Strafe RGB.

BugLink: https://bugs.launchpad.net/bugs/1678477Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull MIPS fixes from Ralf Baechle:
 "The two indirect syscall fixes have sat in linux-next for a few days.
  I did check back with a hardware designer to ensure a SYNC is really
  what's required for the GIC fix and so the GIC fix didn't make it into
  to linux-next in time for this final pull request.

  It builds in local build tests and passes Imagination's test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  irqchip: mips-gic: SYNC after enabling GIC region
  MIPS: Remove pt_regs adjustments in indirect syscall handler
  MIPS: seccomp: Fix indirect syscall args

Pull x86 fixes from Thomas Gleixner:

 - Expand the space for uncompressing as the LZ4 worst case does not fit
   into the currently reserved space

 - Validate boot parameters more strictly to prevent out of bound access
   in the decompressor/boot code

 - Fix off by one errors in get_segment_base()

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Prevent faulty bootparams.screeninfo from causing harm
  x86/boot: Provide more slack space during decompression
  x86/ldt: Fix off by one in get_segment_base()

Pull timer fix from Thomas Gleixner:
 "A single fix for a thinko in the raw timekeeper update which causes
  clock MONOTONIC_RAW to run with erratically increased frequency"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Fix ktime_get_raw() incorrect base accumulation