- 07 Aug, 2014 15 commits
-
-
Mika Kuoppala authored
If the actual head has progressed forward inside a batch (request), don't accumulate hangcheck score. As the hangcheck score in increased only by acthd jumping backwards, the result is that we only declare an active batch as stuck if it is trapped inside a loop. Or that the looping will dominate the batch progression so that it overcomes the bonus that forward progress gives. v2: Improved commit message (Chris Wilson) Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> [danvet: s/active_loop/active (loop)/ as requested by Chris.] Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Kenneth Graunke authored
On Broadwell, any PIPE_CONTROL with the "State Cache Invalidate" bit set must be preceded by a PIPE_CONTROL with the "CS Stall" bit set. Documented on the BSpec 3D workarounds page. Reviewed-by:
Rafael Barbalho <rafael.barbalho@intel.com> Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> [vsyrjala: add chv w/a note too] Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Kenneth Graunke authored
We'll want to reuse this for a workaround. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Rmove now unused int.] Signed-off-by:
-
Ville Syrjälä authored
The DDL registers can hold 7bit numbers. Make the most of those seven bits by adjusting the threshold where we switch between the 64 vs. 32 precision multipliers. Also we compute 'entries' to make the decision about precision, and then we recompute the same value to calculate the actual drain latency. Just use the already calculate 'entries' there. Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Zhenyu Wang authored
Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Rodrigo Vivi authored
GTIER and DEIER doesn't have same interface on HSW so this "or" operation makes the information provided useless. v2: since we have gtier variable already let's split for everybody and avoid the strange | op. Also avoid overriding the value that was set for vlv. In this case I believe that we should reorganize the whole function, but I'll respect the comment that ask to not touch the order and let this organization work to be done later. v3: moving VLV check to the right place. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Daniel Vetter authored
Users often can't do anything about this since their vendors stopped providing BIOS updates. Also we seem to be able to hack around it with increased latency values, and thus far the only reports have been for screens with really high resolutions. So tune it down to a level where only developers can see it. Also drop some of the end-user fluff. Reviewed-by:
-
Daniel Vetter authored
Power users spot this and then get adventurous and try to adjust module driver options. Nothing good ever came out of that, so hide it better. Reviewed-by:
-
Daniel Vetter authored
Since I've reworked psr support to no longer require x-tiling we don't check any state protected by the Giant GEM Lock. So drop that check. Also boo for lockdep_assert_held for not yelling when lockdep is disabled. Cc: Paulo Zanoni <przanoni@gmail.com> Reported-by:
Paulo Zanoni <przanoni@gmail.com> Acked-by:
-
Rodrigo Vivi authored
Fix signal_offset when recording semaphore state on BDW. Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Imre Deak authored
Just like during booting the BIOS can leave the VDD bit enabled after system resume. So apply the same state sanitization there too. This fixes a problem where after resume the port power domain refcount gets unbalanced. v2: - unchanged v3: - call edp sanitizing from the encoder reset handler (Daniel) Reported-and-tested-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Shobhit Kumar authored
Check in vlv_crtc_clock_get if DPLL is enabled before calling dpio read. It will not be enabled for DSI and avoid dpio read WARN dumps. Absence of ->get_config was causing other WARN dumps as well. Update dpll_hw_state as well correctly v2: Address review comments by Daniel - Check if DPLL is enabled rather than checking pipe output type - set adjusted_mode->flags to 0 in compute_config rather than using pipe_config->quirks - Add helper function in intel_dsi_pll.c and use that in intel_dsi.c - updated dpll_hw_state correctly - Updated commit message and title v3: Address review comments by Imre - Proper masking of P1, M1 fields while computing divisors - assert in case of bpp mismatch - guard for divide by 0 while computing pclk - Use ARRAY_SIZE instead of direct calculation Signed-off-by:Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by:
-
Imre Deak authored
This will be needed by an upcoming patch too that needs to sanitize the VDD state during resume. The additional async disabling is only needed for the resume path, here it doesn't make a difference since we enable VDD right after the sanitize call. v2: - don't set intel_dp ptr for non-eDP encoders (Ville) Signed-off-by:
-
Shobhit Kumar authored
Ensure that the DSI packets for a particular sequence are completely sent before going ahead in the enabling or disabling of the panel Signed-off-by:
-
Pavel Machek authored
Gcc warns that addr might be used uninitialized. It may not, but I see why gcc gets confused. Additionally, hiding code with side-effects inside WARN_ON() argument seems uncool, so I moved it outside. Signed-off-by:
Pavel Machek <pavel@ucw.cz> [danvet: Add obligatory /* shuts up gcc */ comment.] Signed-off-by:
-
- 05 Aug, 2014 7 commits
-
-
Daniel Vetter authored
Signed-off-by: -
Tetsuo Handa authored
Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free() are currently doing GFP_KERNEL allocation. But these functions did not get updated to receive gfp_t argument. This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions, and removes the deadlock warning. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Tetsuo Handa authored
While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL allocation, ttm_pool_shrink_scan() does not do it. This can result in stack overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to memory pressure. shrink_slab() => ttm_pool_shrink_scan() => ttm_page_pool_free() => kmalloc(GFP_KERNEL) => shrink_slab() => ttm_pool_shrink_scan() => ttm_page_pool_free() => kmalloc(GFP_KERNEL) Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does. Signed-off-by: -
Tetsuo Handa authored
I can observe that RHEL7 environment stalls with 100% CPU usage when a certain type of memory pressure is given. While the shrinker functions are called by shrink_slab() before the OOM killer is triggered, the stall lasts for many minutes. One of reasons of this stall is that ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with _manager->lock held causes someone (including kswapd) to deadlock when these functions are called due to memory pressure. This patch changes "mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to avoid deadlock. Signed-off-by:
-
Tetsuo Handa authored
We can use "unsigned int" instead of "atomic_t" by updating start_pool variable under _manager->lock. This patch will make it possible to avoid skipping when choosing a pool to shrink in round-robin style, after next patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork). Signed-off-by:
-
Tetsuo Handa authored
list_empty(&_manager->pools) being false before taking _manager->lock does not guarantee that _manager->npools != 0 after taking _manager->lock because _manager->npools is updated under _manager->lock. Signed-off-by:
-
Dave Airlie authored
Signed-off-by:
-
- 04 Aug, 2014 18 commits
-
-
Dave Airlie authored
Signed-off-by: -
Dave Airlie authored
Merge branch 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. * 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: Add DRM driver itself drm: sti: add Compositor drm: sti: add Mixer drm: sti: add VID layer drm: sti: add GDP layer drm: sti: add TVOut driver drm: sti: add HDA driver drm: sti: add HDMI driver drm: sti: add VTAC drivers drm: sti: add VTG driver drm: sti: add bindings for DRM driver
-
git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie authored
This builds upon the previous set of fixes which were pulled on 6th July. Included in this set are: - an update from Jean-Francois to add the missing reg documentation entry to the device tree documentation. - conversion of the tda998x driver to the component helpers. * 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add component support drm/i2c: tda998x: allow re-use of tda998x support code drm/i2c: tda998x: fix lack of required reg in DT documentation Conflicts: drivers/gpu/drm/i2c/tda998x_drv.c
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
This time around we have a mix of new hw enablement (mdp5 v1.3 / apq8084), plus devicetree and various upstream changes (mostly adapting to CCF vs downstream clk driver differences) for mdp4 / apq8064. With these drm/msm patches plus a few other small patchsets (from linaro qcom integration branch.. mostly stuff queued up for 3.17) we have the inforce ifc6410 board working, with gpu. Much nicer to work with than ancient vendor android branch :-) * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo drm/msm/hdmi: enable lpm-mux if it is present drm/msm/mdp5: add support for MDP5 v1.3 drm/msm: fix potential deadlock in gpu init drm/msm: use upstream iommu drm/msm: no mmu is only error if not using vram carveout drm/msm: fix BUG_ON() in error cleanup path drm/msm/mdp4: add mdp axi clk drm/msm: hdmi phy 8960 phy pll drm/msm: update generated headers drm/msm: DT support for 8960/8064 (v3) drm/msm: Implement msm drm fb_mmap callback function drm/msm: activate iommu support drm/msm: fix double struct_mutex acquire
-
Dave Airlie authored
Linux 3.16 backmerge requested by i915, nouveau and radeon authors Conflicts: drivers/gpu/drm/i915/i915_gem_render_state.c drivers/gpu/drm/i915/intel_drv.h
-
Beeresh Gopal authored
HDMI_MUX_EN gpio is requested. If an error occurs, the same name should be printed (HDMI_MUX_EN) instead of HDMI_MUX_SEL (typo). Signed-off-by:
Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by:
Stephane Viau <sviau@codeaurora.org> Reviewed-by:
Andreas Färber <afaerber@suse.de> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Beeresh Gopal authored
lpm-mux is programmed to enable HDMI connector on the docking station for S805 chipset based devices. Signed-off-by:
-
Stephane Viau authored
MDP5 has several functional blocks (ie: VIG/RGB pipes, LMs, ...). From one revision to another, these blocks' base addresses might change due to the number of instances present in the MDP5 hw. A way of dealing with these offset changes is to introduce dynamic offsets 'per block'. This change adds support for the new revision of MDP5: v1.3. The idea is to define one hw config per MDP version and select either one of them at runtime, after reading the MDP5 version. Once the MDP version is known, 'per block' dynamic offsets are initialized through a global pointer, which is then used for read/write register access. Signed-off-by:
-
Rob Clark authored
Somewhere along the way, the firmware loader sprouted another lock dependency, resulting in possible deadlock scenario: &dev->struct_mutex --> &sb->s_type->i_mutex_key#2 --> &mm->mmap_sem which is problematic vs things like gem mmap. So introduce a separate mutex to synchronize gpu init. Signed-off-by: -
Rob Clark authored
Downstream kernel IOMMU had a non-standard way of dealing with multiple devices and multiple ports/contexts. We don't need that on upstream kernel, so rip out the crazy. Note that we have to move the pinning of the ringbuffer to after the IOMMU is attached. No idea how that managed to work properly on the downstream kernel. For now, I am leaving the IOMMU port name stuff in place, to simplify things for folks trying to backport latest drm/msm to device kernels. Once we no longer have to care about pre-DT kernels, we can drop this and instead backport upstream IOMMU driver. Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Rob Clark authored
Downstream kernel holds this clk via a fake-parent relationship. Upstream clock framework requires that we hold it explicitly. Signed-off-by: -
Rob Clark authored
On downstream kernel the clk driver directly bangs hdmi phy registers. For upstream kernel, we need to model this as a clock and register with the clock framework. Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Rob Clark authored
Now that we (almost) have enough dependencies in place (MMCC, RPM, etc), add necessary DT support so that we can use drm/msm on upstream kernel. v2: update for review comments v3: rebase on component helper changes Signed-off-by: -
Hai Li authored
This change implements msm drm specific fb_mmap function for fb device to properly map the fb address to userspace. Signed-off-by:
Hai Li <hali@codeaurora.org> Signed-off-by:
-
Stephane Viau authored
This changes activates the iommu support for MDP5, through the platform config structure. Signed-off-by:
-
