Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Remove the test for MDEV-14528. This is supposed to test that parallel
replication from pre-10.0 master will update Seconds_Behind_Master. But
after MDEV-12179 the SQL thread is blocked from even beginning to fetch
events from the relay log due to FLUSH TABLES WITH READ LOCK, so the test
case is no longer testing what is was intended to. And pre-10.0 versions are
long since out of support, so does not seem worthwhile to try to rewrite the
test to work another way.

The root cause of the test failure is MDEV-34778. Briefly, depending on
exact timing during slave stop, the rli->sql_thread_caught_up flag may end
up with different value. If it ends up as "true", this causes
Seconds_Behind_Master to be 0 during next slave start; and this caused test
case timeout as the test was waiting for Seconds_Behind_Master to become
non-zero.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Depending on timing, an extra event run could start just when the event
scheduler is shut down and delay running until after the table has been
dropped; this would cause the test to fail with a "table does not exist"
error in the log.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

(Revert a change done by mistake when XtraDB was removed.)
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Before doing mark_start_commit(), check that there is no pending deadlock
kill. If there is a pending kill, we won't commit (we will abort, roll back,
and retry). Then we should not mark the commit as started, since that could
potentially make the following GCO start too early, before we completed the
commit after the retry.

This condition could trigger in some corner cases, where InnoDB would take
temporarily table/row locks that are released again immediately, not held
until the transaction commits. This happens with dict_stats updates and
possibly auto-increment locks.

Such locks can be passed to thd_rpl_deadlock_check() and cause a deadlock
kill to be scheduled in the background. But since the blocking locks are
held only temporarily, they can be released before the background kill
happens. This way, the kill can be delayed until after mark_start_commit()
has been called. Thus we need to check the synchronous indication
rgi->killed_for_retry, not just the asynchroneous thd->killed.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

One cause of the slowdown is because the ftruncate call can be much
slower on some systems.  ftruncate() is called by Aria for internal
temporary tables, tables created by the optimizer, when the upper level
asks Aria to delete the previous result set. This is needed when some
content from previous tables changes.

I have now changed Aria so that for internal temporary tables we don't
call ftruncate() anymore for maria_delete_all_rows().

I also had to update the Aria repair code to use the logical datafile
size and not the on-disk datafile size, which may contain data from a
previous result set.  The repair code is called to create indexes for
the internal temporary table after it is filled.
I also replaced a call to mysql_file_size() with a pwrite() in
_ma_bitmap_create_first().

Reviewer: Sergei Petrunia <sergey@mariadb.com>
Tester: Dave Gosselin <dave.gosselin@mariadb.com>

removed duplicated methods

Missed method added.

In commit 232d7a5e we almost got
the detection logic right. However, the XGETBV instruction would
crash if Linux was started up with the option noxsave.

have_vpclmulqdq(): Check for the XSAVE flag at the correct position
and also for the AVX flag.

This was tested on Ubuntu 22.04 by starting up its Linux 5.15 kernel
with and without the noxsave option.

Added missed methods to Item_string child.

Missing methods added to Item_bin_string

This is needed as the order of rows are not deterministic,
especially in future versions of table statistics.

The original code is correct.

valgrind and asan binaries should be built with a specialiced version of
mem_root that makes it easier to find memory overwrites.
This is what the BUILD scripts is doing.

The specialiced mem_root code allocates a new block for every allocation
which is visiable for any test that depenmds on the default original malloc
size and usage.

Running an UPDATE statement in PS mode and having positional
parameter(s) bound with an array of actual values (that is
prepared to be run in bulk mode) results in incorrect behaviour
in presence of on update trigger that also executes an UPDATE
statement. The same is true for handling a DELETE statement in
presence of on delete trigger. Typically, the visible effect of
such incorrect behaviour is expressed in a wrong number of
updated/deleted rows of a target table. Additionally, in case UPDATE
statement, a number of modified rows and a state message returned
by a statement contains wrong information about a number of modified rows.

The reason for incorrect number of updated/deleted rows is that
a data structure used for binding positional argument with its
actual values is stored in THD (this is thd->bulk_param) and reused
on processing every INSERT/UPDATE/DELETE statement. It leads to
consuming actual values bound with top-level UPDATE/DELETE statement
by other DML statements used by triggers' body.

To fix the issue, reset the thd->bulk_param temporary to the value
nullptr before invoking triggers and restore its value on finishing
its execution.

The second part of the problem relating with wrong value of affected
rows reported by Connector/C API is caused by the fact that diagnostics
area is reused by an original DML statement and a statement invoked
by a trigger. This fact should be take into account on finalizing a
state of diagnostics area on completion running of a statement.

Important remark: in case the macros DBUG_OFF is on, call of the method
  Diagnostics_area::reset_diagnostics_area()
results in reset of the data members
  m_affected_rows, m_statement_warn_count.
Values of these data members of the class Diagnostics_area are used on
sending OK and EOF messages. In case DML statement is executed in PS bulk
mode such resetting results in sending wrong result values to a client
for affected rows in case the DML statement fires a triggers. So, reset
these data members only in case the current statement being processed
is not run in bulk mode.

The #pragma that was removed in
commit e255837e (MDEV-34266)
turns out to be necessary for silencing all cases of
-Wstringop-truncation.

- Added plugin_debug.test, multiple_index.test to innodb_fts suite
from mysql-5.7.

- commit c5b28e55 removes the warning
for InnoDB rebuilding table to add FTS_DOC_ID

- multiple_index test case  has MATCH(a) values are smaller
than in MySQL because ROLLBACK updates the stat_n_rows.

- st_mysql_ftparser_boolean_info structure conveys boolean
metadata to mysql search engine for every word in the query.
This structure misses the position value to store the correct
offset of every word. So phrase search queries in plugin_debug
test case with boolean mode for simple parser throws
wrong result.

With wsrep_sst_rsync, node goes into endless loop when trying
to establish connection to donor for IST/SST if the database
is bind on specific IP address, not the "*".

This commit fixes this problem. Separate tests are not
required - the problem can occur in normal configurations
on a number of systems when selecting a bing address other
than "*", especially on FreeBSD and with the IPv6 addresses.

int wsrep_thd_append_key(THD*, const wsrep_key*, int, Wsrep_service_key_type)

CREATE TABLE [SELECT|REPLACE SELECT] is CTAS and idea was that
we force ROW format. However, it was not correctly enforced
and keys were appended before wsrep transaction was started.

At THD::decide_logging_format we should force used stmt binlog
format to ROW in CTAS case and produce a warning if used
binlog format was not ROW.

At ha_innodb::update_row we should not append keys similarly
as in ha_innodb::write_row if sql_command is SQLCOM_CREATE_TABLE.
Improved error logging on ::write_row, ::update_row and ::delete_row
if wsrep key append fails.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

A mixture of a multi-byte *TEXT column and a short binary column
produced a too large column.
For example, COALESCE(tinytext_utf8mb4, short_varbinary)
produced a BLOB column instead of an expected TINYBLOB.

- Adding a virtual method Type_all_attributes::character_octet_length(),
  returning max_length by default.
- Overriding Item_field::character_octet_length() to extract
  the octet length from the underlying Field.
- Overriding Item_ref::character_octet_length() to extract
  the octet length from the references Item (e.g. as VIEW fields).
- Fixing Type_numeric_attributes::find_max_octet_length() to
  take the octet length using the new method character_octet_length()
  instead of accessing max_length directly.

Let perror produce OS error messages in English

fprintf() on Windows, when used on unbuffered FILE*, writes bytewise.
This can make crash handler messages harder to read, if they are mixed up
with other error log output.

Fixed , on Windows, by using a small buffer for formatting, and fwrite
instead of fprintf, if buffer is large enough for message.

The reason is that on Windows, OpenSSL can be built with different C runtime
than the server (e.g Debug runtime in debug vcpkg build).

Overwriting only malloc(), with CRT that server is using can cause
mixup of incompatible malloc() and free() inside openssl.

To fix, overwrite all memory functions.

Usually it is not needed, but sometimes we need to testing interoperability,
e.g OpenSSL server / SCHANNEL client, or WolfSSL server / OpenSSL client.

For named pipe, server and client are on the same machine, and
opt_local_infile just adds unnecessary copying via "load data local infile"

Assertion `table->field[0]->ptr >= table->record[0] &&
table->field[0]->ptr <= table->record[0] + table->s->reclength' failed in
handler::assert_icp_limitations.

table->move_fields has some limitations:
1. It cannot be used in cascade
2. It should always have a restoring pair.

Rule 1 is covered by assertions in handler::assert_icp_limitations
and handler::ptr_in_record (commit 30894fe9).

Rule 2 should be manually maintained with care. Hopefully, the rule 1 assertions
may sometimes help as well.

In ha_myisam::repair, both rules are broken. table->move_fields is used
asymmetrically there: it is set on every param->fix_record call
(i.e. in compute_vcols) but is restored only once, in the end of repair.

The reason to updating field ptr's for every call is that compute_vcols can
(supposedly) be called in parallel, that is, with the same table, but different
records.

The condition to "unmove" the pointers in ha_myisam::restore_vcos_after_repair
is incorrect, when stored vcols are available, and myisam stores a VIRTUAL field
if it's the only field in the table (the record cannot be of zero length).

This patch solves the problem by "unmoving" the pointers symmetrically, in
compute_vcols. That is, both rules will be preserved maintained.

Test improvements only to make test more robust.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Modified node config with longer timeouts for suspect,
inactive, install and wait_prim timeout. Increased
node_1 weight to keep it primary component when
other nodes are voted out.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Replication of MyISAM and Aria DML is experimental and best
effort only. Earlier change make INSERT SELECT on both
MyISAM and Aria to replicate using TOI and STATEMENT
replication. Replication should happen only if user
has set needed wsrep_mode setting.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Fixed used configuration and added suppression for warning
message. Test case changes only.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Modified test configuration file to use wsrep_sync_wait
to make sure committed transactions are replicated before
next operation.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

New runtime type diagnostic (MDEV-34490) has detected that classes
Item_func_eq, Item_default_value and Item_date_literal_for_invalid_dates
incorrectly return an instance of its ancestor classes when being cloned.
This commit fixes that.

Additionally, it fixes a bug at Item_func_case_simple::do_build_clone()
which led to an endless loop of cloning functions calls.

Reviewer: Oleksandr Byelkin <sanja@mariadb.com>

Reason:
======
- InnoDB fails to load the instant alter table metadata from
clustered index while loading the table definition.
The reason is that InnoDB metadata blob has the column length
exceeds maximum fixed length column size.

Fix:
===
- InnoDB should treat the long fixed length column as variable
length fields that needs external storage while initializing
the field map for instant alter operation