Previously, when running mysqlbinlog without providing a binlog file, it
would print the entire help text, which was very verbose and made it
difficult to identify the actual issue.

Now change the behavior to print a more concise error message instead:

    "ERROR: Please provide the log file(s). Run with '--help' for usage instructions."

This makes the error output more user-friendly and easier to understand,
especially when running the tool in scripts or automated processes.

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.

Based on logs we might start SST before donor has reached
Primary state. Because this test shutdowns all nodes we
need to make sure when we start nodes that previous nodes
have reached Primary state and joined the cluster.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

mtr_t::commit_shrink(): Do not assert that some previously clean pages
will be flagged as modified by this mini-transaction. It could be the
case that there had been no recent write-back of any of the undo
tablespace pages that we are modifying when truncating the tablespace.
It suffices to assert that some pages were modified again:
ut_ad(m_modifications).

This fixes up commit f5fddae3

The test could fail with a duplicate key error because switching to non-GTID
mode could start at the wrong old-style position. The position could be
wrong when the previous GTID connect was stopped before receiving the fake
GTID list event which gives the old-style position corresponding to the GTID
connected position.

Work-around by injecting an extra event and syncing the slave before
switching to non-GTID mode.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Starting with GCC 10, let us enable _GLIBCXX_DEBUG as well as
_GLIBCXX_ASSERTIONS which have an impact on the GNU libstdc++.
On GCC 8, we observed a compilation failure related to some
missing type conversion.

Even though clang on GNU/Linux would default to using libstdc++
and enabling the debugging seems to work with clang-18, we will
not enable this on clang, in case it would lead to compilation
errors.

For the clang libc++ before clang-15 there was _LIBCPP_DEBUG,
but according to
llvm/llvm-project@f3966eaf869b7bdd9113ab9d5b78469eb0f5f028 and
llvm/llvm-project@13ea1343231fa4ae12fe9fba4c789728465783d7 and
llvm/llvm-project@ff573a42cd1f1d05508f165dc3e645a0ec17edb5 it
looks like that for proper results, a specially built debug version
of libc++ would have to be used in order to enable equivalent checks.

This should help catch bugs like the one that
commit 455a15fd fixed.

Reviewed by: Sergei Golubchik

While commit 75b7cd68 was a significant
improvement, we occasionally got test failures of debug builds. One of
the affected tests is innodb.innodb-64k-crash.

MDL wait consists of short 1 second waits (this is not configurable)
repeated until lock_wait_timeout is reached. The stage is changed
to Waiting and back every second. To have predictable result in the
test the query should filter all sequences of X, "Waiting for MDL", X,
leaving just X.

it allocates 1GB of memory, it causes failures in CI

like other galera tests do

`FindZLIB` module uses variable `ZLIB_ROOT`[1] to look for libraries. By
setting the variable, `FindZLIB` is able to search the libraries that
installed in a non-system path (/workspace/mylib for example).

And when using `z` in `LINK_LIBRARIES()` CMake tries to lookup the
library in system path by default. It doesn't work if the library isn't
installed in the path, and use ${ZLIB_LIBRARY} which set by FindZLIB
solve the issue.

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services.

[1]: https://cmake.org/cmake/help/latest/module/FindZLIB.html#hints

followup for 061adae9

This problem was earlier fixed by the patch for MDEV 33344.
Adding a test case only.

There is a convention that Item::val_int() and Item::val_real() return
SQL NULL doing effectively what this code does:
  null_value= true;
  return 0; // Always return 0 for SQL NULL

This is done to optimize boolean value evaluation:
if Item::val_int() or Item::val_real() returned 1 -
that always means TRUE and never can means SQL NULL.
This convention helps to avoid unnecessary testing
Item::null_value after getting a non-zero return value.

Item_func_min_max did not follow this convention.
It could return a non-zero value together with null_value==true.
This made evaluate_join_record() erroneously misinterpret
SQL NULL as TRUE in this call:

  select_cond_result= MY_TEST(select_cond->val_int());

Fixing Item_func_min_max to follow the convention.

The slave IO thread sets MYSQL_SET_CHARSET_DIR. The code for this option
however is not thread-safe in sql-common/client.c. The value set is
temporarily written to mysys global variable `charsets-dir` and can be seen
by other threads running in parallel, which can result in use-after-free
error.

Problem was visible as random failures of test cases in suite multi_source
with Valgrind or MSAN.

Work-around by not setting this option for slave connect, it is redundant
anyway as it is just setting the default value.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

The root cause of the failure is a bug in the Linux network stack:

  https://lore.kernel.org/netdev/87sf0ldk41.fsf@urd.knielsen-hq.org/T/#u

If the slave does a connect(2) at the exact same time that kill -9 of the
master process closes the listening socket, the FIN or RST packet is lost in
the kernel, and the slave ends up timing out waiting for the initial
communication from the server. This timeout defaults to
--slave-net-timeout=120, which causes include/master_gtid_wait.inc to time
out first and fail the test.

Work-around this problem by reducing the --slave-net-timeout for this test
case. If this problem turns up in other tests, we can consider reducing the
default value for all tests.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

disable until fixed

As of version 3.2.0, OpenSSL updated the error message in new versions
("https://github.com/openssl/openssl/commit/81b741f68984"). Update the
tests and result files such that they are compatible with both original
and new error messages.

All new code of the whole pull request, including one or several files that are
either new files or modified ones, are contributed under the BSD-new
license. I am contributing on behalf of my employer Amazon Web Services,
Inc.

mtr_t::memmove(): Revert to the parent of
commit a032f14b
where there was supposed to be an equivalent change
that would avoid hitting a warning in some old version of GCC
when this change was part of another 10.6 based developmet branch.

For some reason, this change is not equivalent but will cause
massive amounts of backup failures in the stress tests
run by Matthias Leich, caught by
commit 4179f93d in 10.6.

When the change buffer records for a page span across multiple change
buffer leaf pages or the starting record is at the beginning of a page
with a left sibling, ibuf_delete_recs deletes only the records in first
page and fails to move to subsequent pages.

Subsequently a slow shutdown hangs trying to delete those left over
records.

Fix-A: Position the cursor to an user record in B-tree and exit only
when all records are exhausted.

Fix-B: Make sure we call ibuf_delete_recs during slow shutdown for
pages with IBUF entries to cleanup any previously left over records.

If replicating an event in ROW format, and InnoDB detects a deadlock
while searching for a row, the row event will error and rollback in
InnoDB and indicate that the binlog cache also needs to be cleared,
i.e. by marking thd->transaction_rollback_request. In the normal
case, this will trigger an error in Rows_log_event::do_apply_event()
and cause a rollback. During the Rows_log_event::do_apply_event()
cleanup of a successful event application, there is a DBUG_ASSERT in
log_event_server.cc::rows_event_stmt_cleanup(), which sets the
expectation that thd->transaction_rollback_request cannot be set
because the general rollback (i.e. not the InnoDB rollback) should
have happened already. However, if the replica is configured to skip
deadlock errors, the rows event logic will clear the error and
continue on, as if no error happened. This results in
thd->transaction_rollback_request being set while in
rows_event_stmt_cleanup(), thereby triggering the assertion.

This patch fixes this in the following ways:
 1) The assertion is invalid, and thereby removed.
 2) The rollback case is forced in rows_event_stmt_cleanup() if
transaction_rollback_request is set.

Note the differing behavior between transactions which are skipped
due to deadlock errors and other errors. When a transaction is
skipped due to an ignored deadlock error, the entire transaction is
rolled back and skipped (though note MDEV-33930 which allows
statements in the same transaction after the deadlock-inducing one
to commit). When a transaction is skipped due to ignoring a
different error, only the erroring statements are rolled-back and
skipped - the rest of the transaction will execute as normal. The
effect of this can be seen in the test results. The added test case
to rpl_skip_error.test shows that only statements which are ignored
due to non-deadlock errors are ignored in larger transactions. A
diff between rpl_temporary_error2_skip_all.result and
rpl_temporary_error2.result shows that all statements in the errored
transaction are rolled back (diff pasted below):

: diff rpl_temporary_error2.result rpl_temporary_error2_skip_all.result
49c49
< 2	1
---
> 2	NULL
51c51
< 4	1
---
> 4	NULL
53c53
< * There will be two rows in t2 due to the retry.
---
> * There will be one row in t2 because the ignored deadlock does not retry.
57d56
< 1
59c58
< 1
---
> 0

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

On Windows systems, occurrences of ERROR_SHARING_VIOLATION due to
conflicting share modes between processes accessing the same file can
result in CreateFile failures.

mysys' my_open() already incorporates a workaround by implementing
wait/retry logic on Windows.

But this does not help if files are opened using shell redirection like
mysqltest traditionally did it, i.e via

--echo exec "some text" > output_file

In such cases, it is cmd.exe, that opens the output_file, and it
won't do any sharing-violation retries.

This commit addresses the issue by introducing a new built-in command,
'write_line', in mysqltest. This new command serves as a brief alternative
to 'write_file', with a single line output, that also resolves variables
like "exec" would.

Internally, this command will use my_open(), and therefore retry-on-error
logic.

Hopefully this will eliminate the very sporadic "can't open file because
it is used by another process" error on CI.

Latest Visual Studio complains about invalid format, it breaks formatting
in the IDE

It uses shutdown/restart etc, features not compatible the embedded.

also add have_debug.inc , since it uses debug_dbug variable

Also, disable MSVC LTO for static client libraries - they won't be usable
for end-users.

MDEV-33431 Latching order violation reported fil_system.sys_space.latch and ibuf_pessimistic_insert_mutex

Issue:
------
The actual order of acquisition of the IBUF pessimistic insert mutex
(SYNC_IBUF_PESS_INSERT_MUTEX) and IBUF header page latch
(SYNC_IBUF_HEADER) w.r.t space latch (SYNC_FSP) differs from the order
defined in sync0types.h. It was not discovered earlier as the path to
ibuf_remove_free_page was not covered by the mtr test. Ideal order and
one defined in sync0types.h is as follows.
SYNC_IBUF_HEADER -> SYNC_IBUF_PESS_INSERT_MUTEX -> SYNC_FSP

In ibuf_remove_free_page, we acquire space latch earlier and we have
the order as follows resulting in the assert with innodb_sync_debug=on.
SYNC_FSP -> SYNC_IBUF_HEADER -> SYNC_IBUF_PESS_INSERT_MUTEX

Fix:
---
We do maintain this order in other places and there doesn't seem to be
any real issue here. To reduce impact in GA versions, we avoid doing
extensive changes in mutex ordering to match the current
SYNC_IBUF_PESS_INSERT_MUTEX order. Instead we relax the ordering check
for IBUF pessimistic insert mutex using SYNC_NO_ORDER_CHECK.

Previous solution, that would entirely switch timer off, turned out
to be deadlock prone.

This patch fixed previous attempt to switch between long/short interval
periods in MDEV-24295. Now, initial state of the timer is fixed (it is ON).
Also, avoid switching timer to longer periods if there is any activity in
the pool.

This reverts commit 09bae92c.

This fixes up the merge commit 9b182756

Test was waiting INSERT-clause to make rollback but
wait_condition was too tight. State could be
Freeing items or Rollback. Fixed wait_condition
to expect one of them.

create_partitioning_metadata() should only mark transaction r/w
if it actually did anything (that is, the table is partitioned).

otherwise it's a no-op, called even for temporary tables and
it shouldn't do anything at all

Synopsis: If SELECT returned answer from Query Cache it is not really executed.

The reason for firing of assertion
  DBUG_ASSERT((mem_root->flags & ROOT_FLAG_READ_ONLY) == 0);
is that in case the query_cache is on and the same query run by different
stored routines the following use case can take place:
First, lets say that bodies of routines used by the test case are the same
and contains the only query 'SELECT * FROM t1';
  call p1() -- a result set is stored in query cache for further use.
  call p2() -- the same query is run against the table t1, that result in
               not running the actual query but using its cached result.
               On finishing execution of this routine, its memory root is
               marked for read only since every SP instruction that this
               routine contains has been executed.
  INSERT INT t1 VALUE (1); -- force following invalidation of query cache
  call p2() -- query the table t1 will result in assertion failure since its
               execution would require allocation on the memory root that
               has been already marked as read only memory root

The root cause of firing the assertion is that memory root of the stored
routine 'p2' was marked as read only although actual execution of the query
contained inside hadn't been performed.

To fix the issue, mark a SP instruction as not yet run in case its execution
doesn't result in real query processing and a result set got from query cache
instead.

Note that, this issue relates server built in debug mode AND with the protect
statement memory root feature turned on. It doesn't affect server built
in release mode.

Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

This way, if manager thread somehow starts and stops again quickly before
main thread wakes up to check if it started correctly, we will not hang.

Patch suggested by Monty as follow-up to
7f498fbaSigned-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

matched_rec::rec_buf[], matched_rec::bufp: Remove.

matched_rec::block: Make this a pointer to something that
is allocated by buf_block_alloc(). In this way, the only
case where buf_block_t is constructed outside buf_pool
is ALTER TABLE...IMPORT TABLESPACE.

rtr_info::heap: Remove. This was only used for allocating matched_rec,
which now is smaller.

mtr_t::memmove(): Simplify some code to avoid GCC 9.4.0 -Wconversion
in the 10.6 branch as a result of these changes.

Reviewed by: Debarun Banerjee

Raise innodb_lock_wait_timeout from 1 to 5