The variation NORF will be used to develop software on the
microcontroller.

* 3 variations : B39, B40, B41

* Modify position of polygon on Layer6;
* Modify Top Solder under filters

The stackup is properly done for Megtron 6. Include all improvements
from typeA_v4.5.

 * Fix Polygon location in power supply part, change the layer of certain power tracks
 * Fix Mosfet components info in BOM
 * Add HighIsolation rules to power input track
 * Rename board to typeA_v4.5

This is mostly a cleanup release

Fix resistance value on B38, B39, B43:
 * R37 (BIAS of AD): move to 14k3 on 38, 39 and 43
 * R81y (VERY IMPORTANT: main voltage): move to 14k3 on 38, 39 and 43
 * R67y (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R68y (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R71y (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R75y (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R79y (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R73z (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R84y (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R104 (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R105 (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R109 (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43
 * R113 (VERY IMPORTANT: main voltage): move to 22k on 38, 39 and 43

Add R140 to B28.

Add R52x and R53x to B28 to pull down LNA TQL9093 shutdown pin.

They are now located at https://lab.nexedi.com/nexedi/altium-lib

Regenerate ALL output files.

Add 2 more variations : FDDB28 for band 28, DEVBOARD for test purpose.

Variation DEVBOARD has no PA, we have a MCX connector for TX just after
the pre ampli, and a MCX connector for RX before the preampli.

Variation FDDB28 is for band 28 in FDD, this variation has no duplexer
on the PCB but has a MCX connector after the PA for TX and a MCX
connector for RX. The duplexer will be added outside the PCB.

1. Suppress U7x,U7xb (old RF switch) totally on PCB.
2. Split Pwr_1 Schematic into Pwr_1 and Pwr_2 to fit A4 format.
3. Add C40x and C40xb to split Net between filter F3B38 and F4B4243.

Improve Gerber files and BOM.