- 15 Feb, 2019 27 commits
-
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
mvebu dt64 for 5.1 (part 1) - Interrupt support to Armada 7K/8K thermal nodes - Armada 37xx related patches allowing to enable suspend to RAM (USB2, USB3, PCIe, SATA, DSA) - uDPU board support (Armada-3720 based):single-port FTTdp distribution point unit - Fixes for EspressoBin Ethernet support when using U-Boot mainline - cleanup for partitions under flashes nodes * tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property arm64: dts: marvell: armada-3720-espressobin: declare PCIe PHY arm64: dts: marvell: armada-37xx: declare the COMPHY node arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes arm64: dts: armada-3720-espressobin: Set mv88e6341 cpu port as RGMII-ID arm64: dts: armada-3720-espressobin: Configure RGMII and SMI pins arm64: dts: marvell: Add device tree for uDPU board arm64: dts: marvell: armada-3720-espressobin: declare PCIe warm reset pin arm64: dts: marvell: armada-37xx: declare PCIe reset pin arm64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs arm64: dts: marvell: armada-37xx: fix USB2 memory region arm64: dts: marvell: armada-37xx: declare SATA clock arm64: dts: marvell: armada-37xx: fix SATA node scope arm64: dts: marvell: add interrupt support to cp110 thermal node arm64: dts: marvell: add interrupt support to ap806 thermal node Signed-off-by:Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt2712: Add device nodes for usb3, iommu, smi, i2c, spi, pwm, mmc, NAND flash and PCIe mt6797: add pinctrl node enable uart pins on x20 board enable uart pins on EVB mt7622: Add all CPUs to the cooling maps mt7623a: Remove unused binding description mt7629: Add binding description for the SoC and the BananaPi based on this chip mt8173: Add all CPUs to the cooling maps mt8183: Add binding description for the SoC * tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: arm: mediatek: add support for MT7622 BPI-R64 and MT7629 RFB dt-bindings: arm: mediatek: remove unused "mediatek, mt7623a" dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform arm64: dts: add pcie nodes for MT2712 arm64: dts: add nand nodes for MT2712 arm64: dts: add mmc nodes for MT2712 arm64: dts: add pwm nodes for MT2712 arm64: dts: add spi nodes for MT2712 arm64: dts: add i2c nodes for MT2712 arm64: dts: add iommu/smi nodes for MT2712 arm64: dts: Add USB3 related nodes for MT2712 ARM64: dts: mediatek: Add all CPUs in cooling maps arm64: dts: Add uart for mt6797 EVB arm64: dts: mediatek: x20: Add pinmux support for UART1 arm64: dts: mediatek: mt6797: Add pinctrl support Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.0-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt7623: - add cooling mask to all CPUs - add compatible to sysirq binding * tag 'v5.0-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: interrupt-controller: update bindings for MT7623 ARM: dts: mt7623: Add all CPUs in cooling maps Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.1-rc1 This contains a couple of fixes to existing device trees, enables CPU frequency scaling on various Tegra210 boards, enables the TCU as debug serial port on Jetson Xavier, adds various improvements for SDMMC on Tegra210, Tegra186 and Tegra194 boards and finally adds initial support for the NVIDIA Shield TV. * tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits) arm64: tegra: Update compatible for Tegra186 I2C arm64: tegra: Update compatible for Tegra210 I2C arm64: tegra: Support 200 MHz for SDMMC on Tegra194 arm64: tegra: Add CQE Support for SDMMC4 arm64: tegra: Add SDMMC auto-calibration settings arm64: tegra: Mark TCU as primary serial port on Tegra194 P2888 arm64: tegra: Add nodes for TCU on Tegra194 arm64: tegra: Enable DFLL clock on Smaug arm64: tegra: Add CPU power rail regulator on Smaug arm64: tegra: Enable DFLL clock on Jetson TX1 arm64: tegra: Add pinmux for PWM-based DFLL support on P2597 arm64: tegra: Add CPU clocks on Tegra210 arm64: tegra: Add DFLL clock on Tegra210 arm64: tegra: p2771-0000: Use TEGRA186_ prefix for GPIO names arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names arm64: tegra: p2597: Sort nodes by unit-address arm64: tegra: p2972: Sort nodes properly arm64: tegra: Add regulators for Tegra210 Darcy arm64: tegra: Add pinmux for Darcy board arm64: tegra: Add gpio-keys nodes for Darcy ... Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.1-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.1-rc1 Contains a single patch that adds the "jedec,spi-nor" compatible string where appropriate. * tag 'tegra-for-5.1-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: add "jedec,spi-nor" flash compatible binding Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: tegra: Changes for v5.1-rc1 This contains device tree binding updates for CPU frequency scaling on Tegra210, BPMP support on Tegra210 and support for NVIDIA Shield TV. * tag 'tegra-for-5.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: cpufreq: tegra124: remove cpu_lp clock from required properties dt-bindings: cpufreq: tegra124: remove vdd-cpu-supply from required properties dt-bindings: clock: tegra124-dfll: add Tegra210 support dt-bindings: clock: tegra124-dfll: Update DFLL binding for PWM regulator dt-bindings: firmware: tegra186-bpmp: Remove name property dt-bindings: firmware: Add bindings for Tegra210 BPMP dt-bindings: tegra: Add Shield TV device tree binding documentation Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.1 * R-Car H2 (r8a7790) based Stout board - Convert to new LVDS DT bindings * R-Car H1 (r8a7779) and M1A (r8a7778) SoCs - Describe HSCIF0/1 devices in DT * RZ/G1M (r8a7743) SoC - Correct sort order of the RWDT node - Remove aliases: should be defined in board rather than SoC DT if needed - Remove generic compatible string from iic3: it is not compatible * RZ/G1N (r8a7744) SoC - Describe LVDS and DU devices in DT - Correct sort order of VSP and MSIOF noces * RZ/G1C (r8a7747) based iWave SBC - Enable RTC * RZ/A2M (r7s9210) SoC and EVB - Initial support * tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a7744: Add LVDS support ARM: dts: r8a7744: Add DU support ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB ARM: dts: r7s9210: Initial SoC device tree ARM: dts: r8a7779: Add HSCIF0/1 device nodes ARM: dts: r8a7778: Add HSCIF0/1 support ARM: dts: r8a7743: Fix sorting of rwdt node ARM: dts: r8a7743: Remove aliases from SoC dtsi ARM: dts: r8a7743: Remove generic compatible string from iic3 ARM: dts: r8a7744: Fix sorting of vsp and msiof nodes ARM: dts: iwg23s-sbc: Enable RTC ARM: dts: stout: Convert to new LVDS DT bindings Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Second Round of Renesas ARM64 Based SoC DT Updates for v5.1 * R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards - Enable HS400 support for eMMC * R-Car E3 (r7a77990) SoC - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) SoC - Describe TMU, CMT, SDHI devices in DT - Describe pincontrol support for SCIF2 device in DT - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board, and CAT874 board - Initial support * tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: cat875: Enable PCIe support arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support arm64: dts: renesas: r8a774c0: Add TMU device nodes arm64: dts: renesas: r8a774c0: Add CMT device nodes arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices arm64: dts: renesas: enable HS400 on R-Car Gen3 arm64: dts: renesas: cat875: Add ethernet support arm64: dts: renesas: r8a774c0-cat874: Add uSD support arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2 arm64: dts: renesas: Add Si-Linux EK874 board support arm64: dts: renesas: Add Si-Linux CAT874 board support Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.1, take 2 Our usual bunch of DT changes for the Allwinner arm SoCs: - LCD support for the Q8 A13 tablets - GMAC support for the A80 - PMIC power supplies for the A83t * tag 'sunxi-dt-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards ARM: dts: sun9i: cubieboard4: Enable GMAC ARM: dts: sun9i: a80-optimus: Enable GMAC ARM: dts: sun9i: Add A80 GMAC RGMII pinmux setting ARM: dts: sun9i: Add A80 GMAC gigabit ethernet controller node ARM: dts: sun9i: Add GMAC clock node ARM: dts: sun9i: cubieboard4: Add GPIO pin-bank regulator supplies ARM: dts: sun9i: a80-optimus: Add GPIO pin-bank regulator supplies ARM: dts: sun9i: a80-optimus: Add node for AXP809's unused dc1sw regulator ARM: dts: sun5i: q8-tablet: Use bananapi,s070wv20-ct16 panel compatible ARM: dts: sun5i: q8-tablet: Add LCD Panel power supply ARM: dts: sun5i: q8-tablet: Add LCD Panel enable GPIO ARM: dts: sun5i: q8-tablet: Move panel properties to correct node level ARM: dts: sun5i: Add backlight GPIO for reference design tablet Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner arm64 DT changes for 5.1, take 2 Our usual round of DT changes for the arm64 Allwinner SoCs: - Enabling of the various power supplies on most a64 boards - H6 SRAM controller support - A64 CSI support * tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards arm64: dts: allwinner: a64: teres-i: enable power supplies arm64: dts: allwinner: h6: Add support for the SRAM C1 section dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1 arm64: dts: allwinner: a64: Add A64 CSI controller arm64: dts: allwinner: h6: Move GIC device node fix base address ordering Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3 and H5 changes for 5.1 Our usual round of DT changes shared between arm and arm64. We have a bunch of changes for board, improving the eMMC support on the H5 variant of the All-H3-CC, enabling HDMI and reworking the CSI driver. * tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.1 - Add SMMU node for Stratix10 - Add vendor prefix fo Novtech - Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA - Add missing reset properties for all IP on Cyclone5 and Arria10 * tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: update more missing reset properties ARM: dts: socfpga: update missing reset property peripherals ARM: dts: Add support for 96Boards Chameleon96 board dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix arm64: dts: stratix10: Add Stratix10 SMMU support Signed-off-by:
-
git://github.com/hisilicon/linux-hisiArnd Bergmann authored
ARM64: DT: Hisilicon SoCs DT updates for 5.1 * Hi6220 SoC and related boards: - Add DMA entries to enable DMA for Bluetooth transfers - Add power-on delay to make wifi stable - Revert HS200 mode to avoid eMMC controller resets and block read failures * Hi3660 SoC and related boards: - Fix SD card detection via setting cd-gpios correctly * Hi3798 SoC and related boards: - Fix malformed SPDX license identifier * tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hikey: Revert "Enable HS200 mode on eMMC" arm64: dts: hikey: Give wifi some time after power-on arm64: dts: hi3798cv200: fix malformed SPDX license identifier arm64: dts: hikey960: fix SDcard detection arm64: dts: hikey: Add DMA entries for Bluetooth UART Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.1 * Fixup GIC IRQ flags and GSBI state on MSM8660 * Add USB OTG, gpio ranges, and Wifi support on MSM8974 Hammerhead * Remove skeleton.dtsi on IPQ4019 * tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: ipq4019: Remove skeleton.dtsi ARM: dts: qcom: msm8974-hammerhead: add USB OTG support ARM: dts: qcom: msm8974: add gpio-ranges ARM: dts: qcom: msm8974-hammerhead: add WiFi support ARM: dts: msm8660: Fix up GIC IRQ flags ARM: dts: msm8660: Mark two GSBI blocks "disabled" Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.1 * Add MSM8998 RPMCC, I2C, and USB related nodes * Add MSM8996 rpmpd node * Fix typo in MSM8996 pin definitions * Disable MSM8996 VFE smmu to fix security violation * Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404 * Enable SDCC1 HS400 support on QCS404 * Add a multitude of nodes on SDM845: SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh bus interconnect, WCN3990 WLAN * Add gpio ranges to SDM845 TLMM * Fix regulator load on sdcard on MSM8998-mtp board * tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (41 commits) arm64: dts: sdm845: Add interconnect provider DT nodes arm64: dts: qcom: msm8996: Disabled VFE SMMU arm64: dts: qcom: qcs404: Add rpmcc node arm64: dts: qcom: msm8998: Add rpmcc node arm64: dts: qcom: msm8998: Add USB-related nodes arm64: dts: qcom: qcs404: Add QUP I2C and SPI nodes arm64: dts: qcom: qcs404: Define remaining UARTs arm64: dts: qcom: qcs404: Specify pinctrl state for UART arm64: dts: qcom: sdm845: Fix lpasscc reg arm64: dts: qcom: sdm845: Remove the duplicate header inclusion arm64: dts: qcom: sdm845: Add reserve-memory nodes arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node arm64: dts: qcom: sdm845: Extend ranges and describe DMA space arm64: dts: qcom: sdm845: Increase address and size cells for soc arm64: dts: sdm845: Add rpmh powercontroller node arm64: dts: msm8996: Add rpmpd device node arm64: dts: sdm845: Add WCN3990 WLAN module device node arm64: dts: qcom: sdm845: Add PDC Global reset driver node arm64: dts: qcom: sdm845: Add SCM DT node arm64: dts: qcom: sdm845: Fix pcs_misc region address for UNI PHY ... Signed-off-by:
-
https://github.com/vzapolskiy/linux-lpc32xxArnd Bergmann authored
ARM: lpc32xx: devicetree updates for v5.1 Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx devicetree files: * added dts file for MYIR Tech MYD-LPC4357 development board, * two missing properties are added to LPC32xx keypad controller device tree node, this fixes a long-standing problem with its initialization, * LPC32xx PL11x LCD controller device node got corrected properties, which allows to use it with a new PL11x DRM driver, * output voltage level on one of Phytec phyCORE-LPC3250 fixed regulators is corrected, the fix is needed to remove duplicating platform data, * Phytec phyCORE-LPC3250 board gets a description of a kit LCD panel, this completes setup of CLCD device tree node for the board, * added unit addresses to memory device nodes on EA and Phytec boards, * fixes of ordinary warnings in dts formatting like leading zeroes, unused address and size cell properties and so on. * tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx: ARM: dts: lpc32xx: ea3250: beautify gpio keys children nodes ARM: dts: lpc32xx: ea3250: add unit address to memory device node ARM: dts: lpc32xx: phy3250: add unit address to memory device node ARM: dts: lpc32xx: phy3250: setup LCD controller to panel interface ARM: dts: lpc32xx: phy3250: remove regulators umbrella device node ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant ARM: dts: lpc32xx: reparent keypad controller to SIC1 ARM: dts: lpc32xx: add required clocks property to keypad device node ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes Signed-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 5.1, please pull the following: - Stefan adds support for the Raspberry Pi 3 A+ by using the same mechanism of creating a symbolic reference to the ARM 32-bit DTS file * tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 3 A+ ARM: dts: add Raspberry Pi 3 A+ Signed-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree updates for 5.1, please pull the following: - Dan relicenses the Luxul DTS files to GPL 2.0+/MIT - Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual BCM4366 radio - Stefan adds support for the Raspberry Pi A+: binding and DTS files. He also provides a bunch of DTC warning fixes for the different RPi DTS(i) files and adds support for missing GPIO lines on RPi 2/3 * tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl ARM: dts: bcm283x: Add missing GPIO line names ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug ARM: dts: bcm2835: Fix labels for GPIO 0,1 ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells ARM: dts: bcm283x: Fix DTC warning for memory node ARM: dts: add Raspberry Pi 3 A+ dt-bindings: bcm: Add Raspberry Pi 3 A+ ARM: dts: BCM5301X: Add basic DT for Phicomm K3 ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Samsung DTS ARM changes for v5.1 1. Extend support for Aries family of mobile devices (e.g. Samsung Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator, power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq. 2. Remove hardcoded bootargs on Galaxy S family (proper support in U-Boot). 3. Fix minor DTC warnings. 4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator properties. 5. Fix the eMMC RTSN pin breaking proper reboot on X2. * tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3 ARM: dts: exynos: Fix eMMC regulator properties on Odroid U3 boards ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and properties ARM: dts: s3c2416: Fix xti node's missing reg property warning ARM: dts: s5pv210: Fix onenand's unit address format warning ARM: dts: s5pv210: Add DMC nodes ARM: dts: s5pv210: Add support for more devices present on Aries ARM: dts: s5pv210: Add reserved memory for MFC on Aries ARM: dts: s5pv210: Remove hardcoded bootargs on Galaxy S and Fascinate 4G ARM: dts: s5pv210: Use correct fimd variant ARM: dts: s5pv210: Add node for exynos-rotator Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.1, round 1 Highlights: ---------- MPU part: -Enable Digital Thermal Sensor (dts) on stm32mp157c-ed1 (and so ev1). MCU part: -Add SPI support on stm32f429 SOC (4 SPIs instances). * tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Enable thermal sensor support on STM32MP157c-ed1 ARM: dts: stm32: add SPI support on STM32F429 SoC Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards are the Rock Pi 4, NanoPC-T4 and NanoPi-M4, with the last two being part of a family and sharing bigger parts of the devicetree. rk3328 got sound-related upgrades and a wider patch drops mmc display-wp fields from nodes which shouldn't use it. * tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: clean up the abuse of disable-wp arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect arm64: dts: rockchip: Add NanoPC-T4 IR receiver arm64: dts: rockchip: Refine nanopi4 differences arm64: dts: rockchip: Add DT for NanoPi M4 arm64: dts: rockchip: add ROCK Pi 4 DTS support arm64: dts: rockchip: Add devicetree for NanoPC-T4 arm64: dts: rockchip: enable analog audio node for rock64 arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsi arm64: dts: rockchip: add rk3328 ACODEC node Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New board the Elgin-R1 based on the rv1108 soc and a number of small improvements for rv1108 as well. RK3066 got support for the core display components and the Edison tablet got its touchscreen added. Apart from that a wider fix to drop display-wp usage from places where it shouldn't be used, a pin fix for Edison and a cleanup to prevent rk3036 board from defining sound-dai-cells for core components in each board separately. * tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: clean up the abuse of disable-wp ARM: dts: rv1108: Add support for rv1108-elgin-r1 board dt-bindings: Add vendor prefix for elgin ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups ARM: dts: rockchip: Add missing dma-names SPI support for rv1108 ARM: dts: rockchip: add rk3066 vop display nodes ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt AM65x DT changes for v5.1. Includes: - EMMC support for am654-evm board * tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654-base-board: Add eMMC Support arm64: dts: ti: k3-am654: Add Support for eMMC host controller Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt DaVinci device-tree updates for v5.1 contains a patch to enable analog mic input on da850 LCDK board. * tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Enable the analog mic input Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts updates for omap variants for v5.1 merge window This series contains board specific dts updates and few minor clean-up changes: - add stdout-path for am335x-chiliboard - add wlcore wakeirq for omap3-evm, pandaboard and omap4-droid4 - remove unnecessary address-cells and io-cells for am33xx - replace deprecated linux,wakeup with wakeup-source property - use spdx license for am335x-shc - configure ethernet pins for omap4-sdp * tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot ARM: dts: am335x-shc.dts: Switch to SPDX identifier ARM: dts: am437x: replace linux,wakeup with wakeup-source property ARM: dts: am33xx: Remove unnecessary properties ARM: dts: omap4-droid4: Configure wlcore wakeirq ARM: dts: Configure wlcore wakeirq for pandaboard ARM: dts: Add wlcore wakeirq for omap3-evm ARM: dts: am335x-chiliboard: Add stdout-path property Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts updates for ti81xx for v5.1 merge window Two changes to add support for McGill University's IceBoard telescope ARM + FPGA instrumentation board. This board is used for several telescopes around the world, see the related device tree commit for some interesting links for more information. Note that these changes are based on the related ti81xx soc changes. * tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874 ARM: dts: ti81xx: Add dts boilerplate for all GPIO and SPI peripherals Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt SoC updates for ti81xx for v5.1 merge window Two changes to add legacy hwmod data for gpio and spi peripherals on ti81xx. We have not yet updated ti81xx to probe devices with ti-sysc interconnect target module driver, so these changes are still needed to make devices usable for the related device tree changes. * tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: ti81xx: Add hwmod boilerplate for all GPIO and SPI peripherals ARM: ti81xx: Move I2C entries in omap_hwmod_81xx to maintain grouping Signed-off-by:
-
- 08 Feb, 2019 13 commits
-
-
Miquel Raynal authored
Reference the PHY nodes from the USB controller nodes. The USB3 host controller is wired to: * the first PHY of the COMPHY IP * the OTG-capable UTMI PHY The USB2 host controller is wired to: * the host-only UTMI PHY Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com>
-
Miquel Raynal authored
The SATA node is wired to the third PHY of the COMPHY IP. Suggested-by:
Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by:
-
Miquel Raynal authored
The PCIe node is wired to the second PHY of the COMPHY IP. Suggested-by:
-
Miquel Raynal authored
Describe the A3700 COMPHY node. It has three PHYs that can be configured as follow: * PCIe or GbE * USB3 or GbE * SATA or USB3 Each of them has its own memory area. Suggested-by:
-
Gregory CLEMENT authored
By using the new binding for the partitions for the flashes we don't need anymore to use #size-cells and #address-cells at the flash node level. Signed-off-by: -
Remi Pommarel authored
The mv88e6341 ethernet switch needs the cpu port control register to be set with TX and RX internal delay in order to work. This fixes ethernet support on system booted via a bootloader that has not already configured this register (e.g. mainline u-boot, or vendor u-boot compiled without ethernet support). Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Remi Pommarel authored
In order to be able to communicate with the 88e6341 switch some pins have to be repurposed as RGMII and SMI pins. This fixes ethernet support on system booted via a bootloader that has not already configured those pins (e.g. mainline u-boot, or vendor u-boot compiled without ethernet support). Signed-off-by:
-
Vladimir Vid authored
This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point unit made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Luis Torres <luis.torres@methode.com> Cc: Scott Roberts <scott.roberts@telus.com> Cc: Paul Arola <paul.arola@telus.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by:
-
Ryder Lee authored
This adds missing bindings for MT7623 sysirq. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com>
-
Biju Das authored
This patch enables PCIEC0 PCI express controller on the sub board. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Silicon Linux CAT 874 board has 2GB DDR memory. Update the dma-ranges mapping for pciec0 node. Also declare pcie bus clock, since it is generated on the CAT874 main board. Signed-off-by:
-
Biju Das authored
This patch adds TMU{0|1|2|3|4} device nodes for r8a774c0 SoC. Signed-off-by: -
Biju Das authored
This patch adds CMT{0|1|2|3} device nodes for r8a774c0 SoC. Signed-off-by:
-
