Merge tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

Basic graphics support for rv1126, some more new peripherals for it as well
and some improvements for the edgeble-neu2 board based on this soc.

* tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add rv1126 VOP_LITE support
  ARM: dts: rockchip: Add rv1126 PD_VO entry
  ARM: dts: rockchip: Add 12V main supply for edgeble-neu2
  ARM: dts: rockchip: Add 3V3_SYS regulator for edgeble-neu2
  ARM: dts: rockchip: Enable SFC for edgeble-neu2
  ARM: dts: rockchip: Drop EMMC_RSTN for edgeble-neu2
  ARM: dts: rockchip: Add rv1126 uart5m2_xfer pins
  ARM: dts: rockchip: Add rv1126 FSPI pins
  ARM: dts: rockchip: Add SFC node to rv1126

Link: https://lore.kernel.org/r/6299163.hdfAi7Kttb@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.

Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).

Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).

Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)

RK3399 got the PCIe endpoint node when used as a PCIe-client.

And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.

* tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
  arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
  arm64: dts: rockchip: add rk3588 PCIe2 support
  arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
  arm64: dts: rockchip: Add NanoPC T6
  dt-bindings: arm: rockchip: Add NanoPC T6
  arm64: dts: rockchip: Enable SATA on Radxa E25
  arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
  arm64: dts: rockchip: switch px30-engicam to enable-gpios
  arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios
  arm64: dts: rockchip: add PCIe3 support for rk3588
  arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
  arm64: dts: rockchip: add USB2 to rk3588s-rock5a
  arm64: dts: rockchip: add USB2 to rk3588-rock5b
  arm64: dts: rockchip: add USB2 to rk3588-evb1
  arm64: dts: rockchip: add USB2 support for rk3588
  arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
  arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
  arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
  arm64: dts: rockchip: Enable RTC for edgeble-neu6b
  arm64: dts: rockchip: Enable SATA for edgeble-neu6b
  ...

Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.6, round 1

Highlights:
----------

- MCU:
  - Add CAN support on stm32f746.
  - Add touchscreen support (edt-ft5306) on stm32f746-disco.
  - Add support to Rocktech RK043FN48H display on stm32f746-disco
    board.
  - Add gpio-ranges for stm32f7 to fix boot issue.

- MPU:
  - STM32MP13:
    - Remove shmem for scmi-optee to match with OP-TEE configuration.
    - Enable OP-TEE asynchronous notification by using PPI#15.
    - Expose and use SCMI regulators on stm32mp135f-dk.

  - STMP32MP15:
    - Remove shmem for scmi-optee to match with OPTEE configuration
    - Deduplicate DSI node to fix  #address-cells/#size-cells issue on
      boards using it.

  - ST:
    - Fix dts check warnings on stm32mp15-scmi boards.

  - DH:
    - Add missing detach mailbox for DHCOM and DHCOR SoM.

  - Odyssey:
    - Add missing detach mailbox for Odyssey SoM.

  - OCTAVO:
    - Add Linux Automation Test Automation Controller (LXA TAC) based
      on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
      DSA-capable ETH switch (2 ports), dual CAN...
      It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
      on STM32MP157.

  - PROTONIC:
    - Add Power over Data Line (PoDL) Power Source Equipment (PSE)
      regulator nodes on PRTT1C board. It allows power delivery and
      data transmission over a single twisted pair.

* tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (29 commits)
  ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
  ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
  dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
  ARM: dts: stm32: support display on stm32f746-disco board
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
  ARM: dts: stm32: add pin map for LTDC on stm32f7
  ARM: dts: stm32: add ltdc support on stm32f746 MCU
  ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
  ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
  ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
  ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
  ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
  ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
  ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
  ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
  ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
  ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
  ARM: dts: stm32: add touchscreen on stm32f746-disco board
  ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
  ARM: dts: stm32: re-add CAN support on stm32f746
  ...

Link: https://lore.kernel.org/r/c0524a16-ab27-0cb5-8e7b-c12f7bde7e0d@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Since OP-TEE release tag 3.22.0, OP-TEE SCMI service for STM32MP13x
SoC family exposes PMIC voltage regulators. This change defines
them in the platform DTS file and removes the fixed regulators that
were previously defined to abstract them before OP-TEE firmware was
ready.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstraction previously used until OP-TEE OS firmware embeds the
service which it does since its release tag 3.22.0.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Adds SCMI regulator identifiers for STM32MP13x family.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Add support to Rocktech RK043FN48H display on stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.

This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Add LTDC (Lcd-tft Display Controller) support.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Merge tag 'dt64-cleanup-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt

Minor improvements in ARM64 DTS for v6.6

Just two cleanups of missing cache properties for Nuvoton and LG.

* tag 'dt64-cleanup-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
  arm64: dts: lg: add missing cache properties
  arm64: dts: nuvoton: add missing cache properties

Link: https://lore.kernel.org/r/20230814114154.26017-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.6

New Boards:
 - TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
 - TI's AM62P5 Starter Kit (SK)

New features:
AM625:
 - Support for Display (parallel only) - hdmi+audio support for
   AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
   for verdin.
 - MCU MCAN support and enable of Toradex Verdin
 - Toradex Verdin Dahlia audio support
AM62A7:
 - MCU MCAN support
 - Enable USB Dual Role Device(DRD) support for AM62A7
   Starter Kit(SK).
AM64:
 - TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
 - Main domain CPSW9G and correponding gateway/ethernet
   switch expansion - GESI board.
J721S2/AM68:
 - New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
 - Main domain CPSW2G and correponding gateway/ethernet
   switch expansion - GESI board.
J784S4/AM69:
 - Boot phase tag marking in device tree
 - UFS support

Cleanups and non-urgent fixes:
 - Cosmetic style fixups around "=" and "{" whitespace usage.
 - Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
   bindings
 - Serdes header file include/dt-bindings/mux/ti-serdes.h is now
   deprecated, use k3-serdes.h in soc dtsi folder.
 - All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
   board level.
 - Fixups for AM62: Crypto powerdomains are conditional to better
   represent control of the crypto engines by security controller.
 - Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
 - Fixups for j721s2/am68: pimux offsets for OSPI.
 - Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
   ranges for wkup/main gpios

* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
  arm64: dts: ti: verdin-am62: Add DSI display support
  arm64: dts: ti: Add support for the AM62P5 Starter Kit
  arm64: dts: ti: Introduce AM62P5 family of SoCs
  dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
  arm64: dts: ti: k3-am69-sk: Add phase tags marking
  arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
  arm64: dts: ti: k3-j784s4: Add phase tags marking
  arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
  arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
  arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
  arm64: dts: ti: k3-am62-main: Add node for DSS
  arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
  arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
  arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
  arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
  arm64: dts: ti: k3-*: fix fss node dtbs check warnings
  arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
  arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
  arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
  arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
  ...

Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expensesSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree chanage for 6.6:

- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
  Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
  thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
  support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
  Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
  regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
  Kozlowski, etc.
- Other small and random changes.

* tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (88 commits)
  arm64: dts: imx8mq-librem5-devkit: Drop power-supply
  arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
  arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
  arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
  arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
  arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
  arm64: dts: imx8mp-debix: remove unused fec pinctrl node
  arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
  arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
  arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
  arm64: dts: imx8mp-evk: Add HDMI support
  arm64: dts: freescale: verdin-imx8mp: dev: add sound card
  arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card
  arm64: dts: imx8mm-emcon: Fix the regulator names
  arm64: dts: imx: Pass a single BD71847 clock entry
  arm64: dts: ls1028a: add l1 and l2 cache info
  arm64: dts: imx8mm-phyboard-polis-rdk: Remove 'fsl,spi-num-chipselects'
  arm64: dts: imx8dxl-evk: Remove 'fsl,spi-num-chipselects'
  arm64: dts: freescale: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  arm64: dts: tqma8mqnl: Add vcc supply to i2c eeproms
  ...

Link: https://lore.kernel.org/r/20230813133354.847010-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX ARM device tree change for 6.6:

- New device tree for TQ-Systems MBLS102xA board.
- A bunch of dtschema warning fixes from Fabio Estevam and
  Krzysztof Kozlowski.
- Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
  for phycore and pfla02 boards.
- Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.

* tag 'imx-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
  ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
  ARM: dts: imx6ul: Fix nand-controller #size-cells
  ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
  ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
  ARM: dts: imx6q-prti6q: Fix the SDIO wifi node
  ARM: dts: vfxxx: Pass 'mmc' as the esdhc node names
  ARM: dts: imx53-smd: Remove invalid SPI flash entry
  ARM: dts: imx50-evk: Use generic node name for SPI NOR flash
  ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entry
  ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  ARM: dts: imx: Remove 'compatible' from the pfuze nodes
  ARM: dts: imx: Pass #sound-dai-cells to sgtl5000
  ARM: dts: nxp: mxs: split interrupts per cells
  ARM: dts: imx6ul-geam: Remove invalid sgtl5000 property
  ARM: dts: imx28: drop incorrect reg in fixed regulators
  ARM: dts: imx27: drop incorrect reg in fixed regulators
  ARM: dts: imx25: drop incorrect reg in fixed regulators
  ARM: dts: imx23: drop incorrect reg in fixed regulators
  ARM: dts: imx50-kobo-aura: switch to enable-gpios
  ...

Link: https://lore.kernel.org/r/20230813133354.847010-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX dt-bindings update for 6.6:

- Add new compatibles for various i.MX based boards: DEBIX, TQMa93xxLA,
  Gateworks i.MX8M, etc.

* tag 'imx-bindings-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: Add Polyhex DEBIX SOM A based boards
  dt-bindings: arm: fsl: fix DEBIX binding
  dt-bindings: arm: fsl: add TQ-Systems LS1021A board
  dt-bindings: arm: Add Gateworks i.MX8M Plus gw73xx-2x board
  dt-bindings: arm: Add Gateworks i.MX8M Plus gw72xx-2x board
  dt-bindings: arm: Add Gateworks i.MX8M Plus gw71xx-2x board
  dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
  dt-bindings: arm: add TQMa93xxLA SOM

Link: https://lore.kernel.org/r/20230813133354.847010-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- Add D1 CAN controller nodes

* tag 'sunxi-dt-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  riscv: dts: allwinner: d1: Add CAN controller nodes

Link: https://lore.kernel.org/r/ZNjRV0kJ7v7+DAH5@wens.twSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt

RISC-V Devicetrees for v6.6

StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
  riscv: dts: starfive: jh7110: Fix GMAC configuration
  riscv: dts: starfive - Add hwrng node for JH7110 SoC
  riscv: dts: starfive - Add crypto and DMA node for JH7110
  riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
  riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
  riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
  riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
  riscv: dts: starfive: jh7110: add dma controller node
  riscv: dts: starfive: Add spi node and pins configuration
  riscv: dts: starfive: Add USB dts node for JH7110
  riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
  riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
  riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
  riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
  riscv: dts: starfive: jh7110: Add ethernet device nodes
  riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
  riscv: dts: starfive: jh7110: Add syscon nodes
  riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
  riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
  dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
  ...

Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spudSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

mvebu dt for 6.6 (part 1)

Fix style issue and incorrect syntax

* tag 'mvebu-dt-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
  ARM: dts: marvell: armada: drop incorrect reg in fixed regulators
  ARM: dts: marvell: add missing space before {

Link: https://lore.kernel.org/r/87h6p4t0lv.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt64-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

mvebu dt64 for 6.6 (part 1)

Add the NAND Flash Controller on the AC5/AC5X SOC device tree
Fix style issue

* tag 'mvebu-dt64-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: Add NAND flash controller to AC5
  arm64: dts: marvell: add missing space before {

Link: https://lore.kernel.org/r/87edk8t0kl.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add MIPI-DSI support to Verdin AM62.

Verdin AM62 has a MIPI DSI interface on the edge connector, this is
provided with a Toshiba TC358778 DPI to MIPI-DSI bridge connected to the
DSS DPI port with a 18-bit width parallel bus.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230812191123.14779-1-francesco@dolcini.itSigned-off-by: Nishanth Menon <nm@ti.com>

Fixed configuration to improve the speed of TCP RX.

Before:
  # iperf3 -s
  -----------------------------------------------------------
  Server listening on 5201 (test #1)
  -----------------------------------------------------------
  Accepted connection from 192.168.1.4, port 47604
  [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-1.00   sec  36.3 MBytes   305 Mbits/sec
  [  5]   1.00-2.00   sec  35.6 MBytes   299 Mbits/sec
  [  5]   2.00-3.00   sec  36.5 MBytes   306 Mbits/sec
  [  5]   3.00-4.00   sec  36.5 MBytes   306 Mbits/sec
  [  5]   4.00-5.00   sec  35.7 MBytes   300 Mbits/sec
  [  5]   5.00-6.00   sec  35.4 MBytes   297 Mbits/sec
  [  5]   6.00-7.00   sec  37.1 MBytes   311 Mbits/sec
  [  5]   7.00-8.00   sec  35.6 MBytes   298 Mbits/sec
  [  5]   8.00-9.00   sec  36.4 MBytes   305 Mbits/sec
  [  5]   9.00-10.00  sec  36.3 MBytes   304 Mbits/sec
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-10.00  sec   361 MBytes   303 Mbits/sec        receiver

After:
  # iperf3 -s
  -----------------------------------------------------------
  Server listening on 5201 (test #1)
  -----------------------------------------------------------
  Accepted connection from 192.168.1.4, port 47710
  [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-1.00   sec   111 MBytes   932 Mbits/sec
  [  5]   1.00-2.00   sec   111 MBytes   934 Mbits/sec
  [  5]   2.00-3.00   sec   111 MBytes   934 Mbits/sec
  [  5]   3.00-4.00   sec   111 MBytes   934 Mbits/sec
  [  5]   4.00-5.00   sec   111 MBytes   934 Mbits/sec
  [  5]   5.00-6.00   sec   111 MBytes   935 Mbits/sec
  [  5]   6.00-7.00   sec   111 MBytes   934 Mbits/sec
  [  5]   7.00-8.00   sec   111 MBytes   935 Mbits/sec
  [  5]   8.00-9.00   sec   111 MBytes   934 Mbits/sec
  [  5]   9.00-10.00  sec   111 MBytes   934 Mbits/sec
  [  5]  10.00-10.00  sec   167 KBytes   933 Mbits/sec
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-10.00  sec  1.09 GBytes   934 Mbits/sec        receiver
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Fixes: 1ff166c9 ("riscv: dts: starfive: jh7110: Add ethernet device nodes")
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[conor: converted to decimal per emil's request]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

The Allwinner D1, T113 provide two CAN controllers that are variants
of the R40 controller.

I have tested support for these controllers on two boards:

- A Lichee Panel RV 86 Panel running a D1 chip
- A Mango Pi MQ Dual running a T113-s3 chip

Both of these fully support both CAN controllers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20230807191952.2019208-1-contact@jookia.orgSigned-off-by: Chen-Yu Tsai <wens@csie.org>

Fixed regulators are not in some bus and bindings do not allow a "reg"
property.  Move them out of "regulators" node to top-level.

  dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Fixed regulators are not in some bus and bindings do not allow a "reg"
property.  Move them out of "regulators" node to top-level.

  armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Device tree entries for PCIe 2.5G Ethernet NICs
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20230810003156.22123-1-inindev@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

RV1126 VOP_LITE supports the video output processing ofMIPI DSI,
RGB display interfaces with max output resolution of 1920x1080.

Add support for vop in rv1126.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731110012.2913742-11-jagan@edgeble.aiSigned-off-by: Heiko Stuebner <heiko@sntech.de>

PD_VO power-domain tree diagram in RV1126 is connected to
- BIU_VO
- VOP
- RGA
- IEP
- DSIHOST

Add PD_VO power-domain entry in RV1126.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731110012.2913742-10-jagan@edgeble.aiSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add all three PCIe2 IP blocks to the RK3588 DT. Note, that RK3588
also has two PCIe3 IP blocks, that will be handled separately.
Co-developed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-neu6a, 6b
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-6-sebastian.reichel@collabora.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The ROCK Pi 4A, ROCK Pi 4B and ROCK Pi 4C boards contain a nor-flash chip
connected to spi1. Enable spi1 and add the device node.

This patch has been tested on ROCK Pi 4A.
Signed-off-by: Stefan Nagy <stefan.nagy@ixypsilon.net>
Link: https://lore.kernel.org/r/20230811201118.15066-1-stefan.nagy@ixypsilon.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

"make dtbs_check":

    arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"make dtbs_check":

    arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

File names inside the file does not add much and just makes it
difficult to move the files, often the file name is not updated
and becomes wrong. Remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This looks better and allows us to see the row and column numbers
more easily. Switch to this macro here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
The arm,pl011 binding requires the first clock to be named "uartclk".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
All "regulator-fixed" are voltage type, so drop "regulator-type".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Writing this bit can be handled by the syscon-reboot driver.
Add this node to DT.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM changes for v6.6

1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
   seems not to work, but at least HDMI improved and dtbs_check is
   happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
   'gpios' suffix over 'gpio', update i2c-arb device node to newer
   binding.
5. Few white-space cleanups.

* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
  ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
  ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
  ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
  ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
  ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
  ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
  ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
  ARM: dts: s5pv210: minor whitespace cleanup around '='
  ARM: dts: exynos: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v6.6

1. Add dedicated compatibles for PWM block.
2. Add PWM to ExynosAutov9 SADK board.
3. Few white-space and other cleanups.

* tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: exynos5433-tm2: drop redundant status=okay
  arm64: dts: exynos: add pwm node for exynosautov9-sadk
  dt-bindings: pwm: samsung: add exynosautov9 compatible
  arm64: dts: fsd: minor whitespace cleanup around '='
  arm64: dts: exynos: minor whitespace cleanup around '='
  arm64: dts: exynos: add missing space before {

Link: https://lore.kernel.org/r/20230810151250.220202-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>