Merge tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Devicetree changes for omap variants

This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.

The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.

* tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits)
  ARM: dts: add omap3-gta04a5one to Makefile
  ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio
  ARM: dts: am335x-boneblack: add cec support
  ARM: dts: am3517-evm: Add support for UI board and Audio
  ARM: dts: gta04: add serial console wakeup irq
  ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
  ARM: dts: omap: Update coresight bindings for hardware ports
  ARM: dts: ti: Fix SPI and I2C bus warnings
  ARM: dts: dra62x-j5eco-evm: get rid of phy_id property
  ARM: dts: dm8148-t410: get rid of phy_id property
  ARM: dts: dm8148-evm: get rid of phy_id property
  ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property
  ARM: dts: am57xx-idk-common: get rid of phy_id property
  ARM: dts: dra7-evm: get rid of phy_id property
  ARM: dts: dra71-evm: get rid of phy_id property
  ARM: dts: dra72-evm-revc: get rid of phy_id property
  ARM: dts: dra72-evm: get rid of phy_id property
  ARM: dts: dra76-evm: get rid of phy_id property
  ARM: dts: am437x-cm-t43: get rid of phy_id property
  ARM: dts: am437x-gp-evm: get rid of phy_id property
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt64 for 4.20 (part 1)

 - Add watchdog node on Armada 37xx
 - Update PPv2 interrupts name
 - Add support for the SolidRun Clearfog GT 8K (Aramda 8040 based)
 - Add thermal-zone nodes for Aramda 7K/8K

* tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: armada-37xx: add nodes to support watchdog
  arm64: dts: marvell: armada-cp110: describe more PPv2 interrupts
  arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names
  arm64: dts: add support for SolidRun Clearfog GT 8K
  arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
  arm64: dts: marvell: add macro to make distinction between node names
  arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
  arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt for 4.20 (part 1)

- updates the armada-xp-98dx3236 SoC and related boards to use the new
  style dts bindings for nand

- add db-88f6820-amc board: plugin card for some of Marvell's switch
  development kits

- fix SPI and I2C bus warnings coming with the new checks in dtc

- add new compatible string "marvell,prestera" to the armada-xp-98dx*

- fix sdhci supply property name on the clearfog (the '-supply' suffix
  was missing)

* tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: clearfog: fix sdhci supply property name
  ARM: dts: mvebu: add "marvell,prestera" to PP nodes
  ARM: dts: marvell: Fix SPI and I2C bus warnings
  ARM: dts: mvebu: Add device tree for db-88f6820-amc board
  ARM: dts: mvebu: db-xc3-24g4: use new style nand binding
  ARM: dts: mvebu: db-dxbc2: use new style nand binding
  ARM: dts: mvebu: 98dx3236: Rename nand controller node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Freescale arm64 device tree update for 4.20:
 - Add the second Dual UART device for LS208xA SoCs.
 - Add necessary big-endian property for NOR device on LS104xA based
   boards, remove unneeded big-endian property from IFC controller.
 - DTC has new checks for I2C and SPI buses to land into 4.20.  A patch
   from Rob to fix the bus node names and warnings in unit-addresses.

* tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: fsl: Fix I2C and SPI bus warnings
  arm64: dts: ls208xa: add second duart
  arm64: dts: fsl: remove big-endian field from IFC controller
  arm64: dts: Add big-endian in nor node for ls104xa
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree update for 4.20:
 - New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore
   6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board.
 - Add Add SFF interface support for vf610-zii board.
 - Disable unneeded devices like VPU and internal watchdog for imx51-zii
   boards.
 - Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board.
 - Improve i.MX6 SLL GPIO support by adding gpio-ranges property and
   clocks information.
 - Update iomux header for i.MX7 Solo and i.MX6 ULL.
 - Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb.
 - Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto.
 - Switch to use SPDX-License-Identifier for more boards - vf610-twr,
   imx7s-warp, Engicam boards.
 - Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add
   the support for i.MX6 RIoTboard.
 - DTC has new checks for SPI buses which will be landed on 4.20.
   A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!)
 - Switch i.MX7 device tree to use updated coresight binding for
   hardware ports.
 - Misc small or random update and cleanup.

* tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
  ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
  dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
  ARM: dts: imx53-ppd: Remove 'num-chipselects' property
  ARM: dts: vf610-twr: Switch to SPDX identifier
  ARM: dts: vf: Switch to SPDX identifier
  ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC
  ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
  ARM: dts: imx6ul: use nvmem-cells for cpu speed grading
  ARM: dts: imx: Fix SPI bus warnings
  ARM: dts: imx7: Update coresight binding for hardware ports
  ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
  ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
  ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
  ARM: dts: imx51-zii-scu2-mezz: Disable VPU
  ARM: dts: imx51-zii-scu3-esb: Disable VPU
  ARM: dts: imx51: Add label for VPU node
  ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
  ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
  ARM: dts: imx6: RIoTboard provide standby on power off option
  dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm Device Tree Changes for v4.20

* Fix IRQ constants usage on MSM8974
* Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
* Move/cleanup common nodes for IPQ8064
* Add i2c sensor nodes for MSM8974 Hammerhead
* Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
* Update coresight bindings

* tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: Update coresight bindings for hardware ports
  ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
  ARM: dts: qcom: ipq4019: fix space vs tab indenting inside qcom-ipq4019.dtsi
  ARM: dts: qcom: ipq4019: fix PCI range
  ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
  ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq support
  ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
  ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
  ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards
  ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi
  ARM: dts: qcom: Add sdcc nodes for ipq8064
  ARM: dts: qcom: Add pcie nodes for ipq8064
  ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
  ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE
  ARM: dts: qcom-msm8974: use named constant for interrupt flag LEVEL HIGH
  ARM: dts: qcom-msm8974: use named constant for interrupt flag EDGE RISING
  ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_SPI
  ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_PPI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm ARM64 Updates for v4.20

* Update Coresight for MSM8916
* Switch to use mailbox for smp2p and smd on MSM8996
* Add dispcc, dsp, USB, regulator, and other nodes for SDM845
* Drop model/compatible from MSM8916 and MSM8996
* Add compat for db820c
* Add MSM8998 SoC and board support along with associated nodes
* Add RESIN/PON for Qualcomm PM8916 and PM8994

* tag 'qcom-arm64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (31 commits)
  Revert "dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'"
  Revert "dt-bindings: iio: vadc: Fix documentation of 'reg'"
  arm64: dts: msm8916: Update coresight bindings for hardware ports
  arm64: dts: msm8996: Transition smp2p and smd to mailbox
  arm64: dts: qcom: pm8998: Add pm8998 thermal zone
  arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
  dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
  arm64: dts: sdm845: Add dispcc node
  arm64: dts: qcom: sdm845: Add adsp, cdsp and slpi smp2p
  arm64: dts: qcom: sdm845-mtp: Add nodes for USB
  arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  arm64: dts: qcom: sdm845: Add USB-related nodes
  arm64: dts: qcom: Add AOSS reset driver node for SDM845
  arm64: dts: msm8996: Drop model
  arm64: dts: msm8916: Drop model and compatible
  arm64: dts: db820c: Add qcom,apq8096 to compatible string
  arm64: dts: qcom: Populate pm8998 with additional nodes
  arm64: dts: qcom: msm8998: Add smp2p nodes
  arm64: dts: qcom: msm8998: Add the qfprom node
  arm64: dts: qcom: msm8998: Add firmware node
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'actions-arm64-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt

Actions Semi arm64 based SoC DT for v4.20

This updates SPDX headers for remaining files.

For S900 it adds clock, pinctrl, i2c and dma nodes.
S900 SPS is added via topic branch (shared with driver).

For S700 it adds clock nodes.

* tag 'actions-arm64-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm64: dts: actions: s700: Set UART clock references from CMU
  arm64: dts: actions: s700: Add Clock Management Unit
  arm64: dts: actions: s900: Add DMA Controller
  arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2
  arm64: dts: actions: s900: Add I2C controller nodes
  arm64: dts: actions: s900-bubblegum-96: Add gpio line names
  arm64: dts: actions: s900: Add gpio properties to pinctrl node
  arm64: dts: actions: s900: Add pinctrl node
  arm64: dts: actions: s900: Add SPS node
  arm64: dts: actions: s900: Source CMU clock for UARTs
  arm64: dts: actions: s900: Add Clock Management Unit nodes
  dt-bindings: power: Add Actions Semi S900 SPS
  arm64: dts: actions: Convert to new-style SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'actions-arm-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt

Actions Semi arm based SoC DT for v4.20

This updates SPDX headers for remaining files.

* tag 'actions-arm-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  ARM: dts: owl: Convert to new-style SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v4.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

mt2712 - add spi slave node

mt7622:
- add timer node
- add CCI node
- add PMU node
- add bluetooth node
- add SPI slave node
- fix reference board (rfb1) memory and sort node alphabetically
- add support for Bananapi-R64

* tag 'v4.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: Add spi slave dts
  arm64: dts: mt7622: add bananapi BPI-R64 board
  arm64: dts: mt7622: fix ram size for rfb1
  arm64: dts: mt7622: add a bluetooth 5 device node
  arm64: dts: mt7622: add timer, CCI-400 and PMU nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner arm64 DT changes for 4.20

Our usual set of DT changes for the arm64 Allwinner SoCs.

The most notable things are:
  - HDMI support on the A64
  - New boards: OrangePi One Plus

* tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (28 commits)
  arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
  arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
  arm64: dts: allwinner: a64: Add display pipeline
  arm64: dts: allwinner: h6: add system controller device tree node
  arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
  arm64: dts: allwinner: a64: Rename r_i2c_pins_a label to r_i2c_pl89_pins
  arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
  arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux
  arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED
  arm64: dts: allwinner: a64: NanoPi-A64: Add Wifi chip
  arm64: dts: allwinner: a64: NanoPi-A64: Add Ethernet
  arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
  arm64: dts: allwinner: a64: Olinuxino: enable USB
  arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodes
  arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
  arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails
  arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node
  arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node
  arm64: dts: allwinner: a64: Orange Pi Win: Add LED node
  arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner DT changes for 4.20

Our usual bunch of DT patches for the Allwinner arm32 SoCs.

The most notable changes are:
  - Support for the video decoding / encoding engine on the
    A10s/A13/A20/A33
  - IR support for the A83t
  - SATA support for the R40

* tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun9i: Fix I2C bus warnings
  ARM: dts: sunxi: Fix I2C bus warnings
  ARM: dts: sun8i-a33: Add Video Engine and reserved memory nodes
  ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes
  ARM: dts: sun5i: Add Video Engine and reserved memory nodes
  ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
  ARM: dts: sun8i: r40: add sata node
  ARM: dts: sunxi: Don't use cd-inverted in sun8i-r40-bananapi-m2-ultra
  ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
  ARM: dts: sun8i: a83t: Add support for the cir interface
  ARM: dts: sun8i: a83t: Add the cir pin for the A83T
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner H3 and H5 DT additions for 4.20

This is our usual H3/H5 pull request

The most notable changes are:
  - the video decoding / encoding unit is finally enabled on the H3
  - Mali support for the H5
  - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support

* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
  ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
  arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
  ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
  ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
  ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
  arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
  ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
  nvmem: sunxi-sid: add support for H5's SID controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Switch to the new hardware port bindings for coresight

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This reverts commit e7044726.

Already picked up via Eduardo's thermal tree
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This reverts commit 7028cae1.

Already picked up via iio tree.
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Remove fixed clock in Cubieboard 7 and use Clock Management Unit clocks
for all UART nodes in Actions Semi S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Moved/added to SoC]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add Clock Management Unit for Actions Semi S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add DMA controller node for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add pinctrl definitions for Actions Semiconductor S900 I2C controllers.
Pinctrl definitions are only available for I2C0, I2C1, and I2C2.
Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add I2C controller nodes for Actions Semiconductor S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed/added clocks, dropped pinctrl properties for now]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add gpio line names to Actions Semi S900 based Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add gpio properties to pinctrl node for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add pinctrl nodes for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add Actions Semi S900 Smart Power System (SPS) node.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

This adds DT bindings for the S900 SPS.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Remove fixed clock in Bubblegum-96 board and source CMU (Clock
Management Unit) clock for UART nodes in Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Move/add clocks to SoC]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add Actions Semi S900 Clock Management Unit (CMU) nodes.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Define power domains for Actions Semi S900 SoC Smart Power System (SPS).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL,
it removes below modules:

- UART5/UART6/UART7/UART8;
- PWM5/PWM6/PWM7/PWM8;
- eCSPI3/eCSPI4;
- CAN1/CAN2;
- FEC1/FEC2;
- I2C3/I2C4;
- EPIT2;
- LCDIF;
- GPT2;
- ADC1;
- TSC;

This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK
board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This patch adds compatible for i.MX6ULZ 14x14 EVK board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The 'num-chipselects' property is not a valid property according
to Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt, so
let's remove it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Bananapi released an updated revision of the H3/H5 based Bananapi M2+.
Version 1.2 enables voltage control for the CPU's regulator by using
a GPIO line to toggle a MOSFET that can change the effective resistance
value in the regulator's feedback network.

This patch adds a common .dtsi file for this new revision, which
includes the original common sunxi-bananapi-m2-plus.dtsi file, and
adds the GPIO-controlled regulator and a cpu-supply reference. H3
and H5 variant dts files are added as well.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

This adds nodes for the Video Engine and the associated reserved memory
for the H3. Up to 96 MiB of memory are dedicated to the CMA pool.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus,
with the H3 SoC replaced with an H5. Everything else is the same.

Add a stub device tree incorporating the shared bananapi-m2-plus dtsi
file.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Three more variants of the Bananapi M2 Plus have been introduced. One
with the H5 instead of the H3, another with the H2+ instead, and the
last with the H3 but with WiFi and eMMC removed.

All these variants use the same board. This patch splits out the
non-SoC-specific parts of the device tree, so that they can be shared
among all the variants. The original Bananapi M2 Plus has been renamed
to Bananapi M2 Plus H3.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The external RTL8211E RGMII Ethernet PHY is configured via external
resistors to use the address 0x1. The 0x0 address is a broadcast address
for this family of PHYs, and should not be used explicitly.

Fixes: 8c7ba536 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i")
Fixes: 4904337f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>