- 03 Jun, 2020 40 commits
-
-
Valentine Fatiev authored
[ Upstream commit 1acba6a8 ] When connected mode is set, and we have connected and datagram traffic in parallel, ipoib might crash with double free of datagram skb. The current mechanism assumes that the order in the completion queue is the same as the order of sent packets for all QPs. Order is kept only for specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and few CM's) in parallel. The problem: ---------------------------------------------------------- Transmit queue: ----------------- UD skb pointer kept in queue itself, CM skb kept in spearate queue and uses transmit queue as a placeholder to count the number of total transmitted packets. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ tail head Completion queue (problematic scenario) - the order not the same as in the transmit queue: 1 2 3 4 5 6 7 8 9 ------------------------------------ ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5 ------------------------------------ 1. CM1 'wc' processing - skb freed in cm separate ring. - tx_tail of transmit queue increased although UD2 is not freed. Now driver assumes UD2 index is already freed and it could be used for new transmitted skb. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ ^ (Bad)tail head (Bad - Could be used for new SKB) In this case (due to heavy load) UD2 skb pointer could be replaced by new transmitted packet UD_NEW, as the driver assumes its free. At this point we will have to process two 'wc' with same index but we have only one pointer to free. During second attempt to free the same skb we will have NULL pointer exception. 2. UD2 'wc' processing - skb freed according the index we got from 'wc', but it was already overwritten by mistake. So actually the skb that was released is the skb of the new transmitted packet and not the original one. 3. UD_NEW 'wc' processing - attempt to free already freed skb. NUll pointer exception. The fix: ----------------------------------------------------------------------- The fix is to stop using the UD ring as a placeholder for CM packets, the cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a new cyclic variables global_tx_head and global_tx_tail are introduced for managing and counting the overall outstanding sent packets, then the send queue will be stopped and waken based on these variables only. Note that no locking is needed since global_tx_head is updated in the xmit flow and global_tx_tail is updated in the NAPI flow only. A previous attempt tried to use one variable to count the outstanding sent packets, but it did not work since xmit and NAPI flows can run at the same time and the counter will be updated wrongly. Thus, we use the same simple cyclic head and tail scheme that we have today for the UD tx_ring. Fixes: 2c104ea6 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes") Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.orgSigned-off-by:
Valentine Fatiev <valentinef@mellanox.com> Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jerry Lee authored
[ Upstream commit 890bd0f8 ] OSD client should ignore cache/overlay flag if got redirect reply. Otherwise, the client hangs when the cache tier is in forward mode. [ idryomov: Redirects are effectively deprecated and no longer used or tested. The original tiering modes based on redirects are inherently flawed because redirects can race and reorder, potentially resulting in data corruption. The new proxy and readproxy tiering modes should be used instead of forward and readforward. Still marking for stable as obviously correct, though. ] Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/23296 URL: https://tracker.ceph.com/issues/36406Signed-off-by:
Jerry Lee <leisurelysw24@gmail.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Kailang Yang authored
[ Upstream commit 630e3612 ] Enable new codec supported for ALC287. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/dcf5ce5507104d0589a917cbb71dc3c6@realtek.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 7f5ad9c9 ] Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices, a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC (USB ID 0414:a000). The latter serves solely for the headphone output on the front panel while the former serves for the rest I/Os (mostly for the I/Os in the rear panel but also including the front mic). Both chips do work more or less with the unmodified USB-audio driver, but there are a few glitches. The ALC1220-VB returns an error for an inquiry to some jacks, as already seen on other TRX40-based mobos. However this machine has a slightly incompatible configuration, hence the existing mapping cannot be used as is. Meanwhile the ESS chip seems working without any quirk. But since both audio devices don't provide any specific names, both cards appear as "USB-Audio", and it's quite confusing for users. This patch is an attempt to overcome those issues: - The specific mapping table for ALC1220-VB is provided, reducing the non-working nodes and renaming the badly chosen controls. The connector map isn't needed here unlike other TRX40 quirks. - For both USB IDs (0414:a000 and 0414:a001), provide specific card name strings, so that user-space can identify more easily; and more importantly, UCM profile can be applied to each. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200526082810.29506-1-tiwai@suse.deSigned-off-by:
-
Eric W. Biederman authored
[ Upstream commit a4ae32c7 ] An invariant of cap_bprm_set_creds is that every field in the new cred structure that cap_bprm_set_creds might set, needs to be set every time to ensure the fields does not get a stale value. The field cap_ambient is not set every time cap_bprm_set_creds is called, which means that if there is a suid or sgid script with an interpreter that has neither the suid nor the sgid bits set the interpreter should be able to accept ambient credentials. Unfortuantely because cap_ambient is not reset to it's original value the interpreter can not accept ambient credentials. Given that the ambient capability set is expected to be controlled by the caller, I don't think this is particularly serious. But it is definitely worth fixing so the code works correctly. I have tested to verify my reading of the code is correct and the interpreter of a sgid can receive ambient capabilities with this change and cannot receive ambient capabilities without this change. Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@kernel.org> Fixes: 58319057 ("capabilities: ambient capabilities") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Chris Chiu authored
[ Upstream commit 4020d1cc ] The Asus USB DAC is a USB type-C audio dongle for connecting to the headset and headphone. The volume minimum value -23040 which is 0xa600 in hexadecimal with the resolution value 1 indicates this should be endianness issue caused by the firmware bug. Add a volume quirk to fix the volume control problem. Also fixes this warning: Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1 Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1 Signed-off-by:
Chris Chiu <chiu@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200526062613.55401-1-chiu@endlessm.comSigned-off-by:
-
Takashi Iwai authored
[ Upstream commit 399c01aa ] We fixed the regression of the speaker volume for some Thinkpad models (e.g. T570) by the commit 54947cd6 ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570"). Essentially it fixes the DAC / pin pairing by a static table. It was confirmed and merged to stable kernel later. Now, interestingly, we got another regression report for the very same model (T570) about the similar problem, and the commit above was the culprit. That is, by some reason, there are devices that prefer the DAC1, and another device DAC2! Unfortunately those have the same ID and we have no idea what can differentiate, in this patch, a new fixup model "tpt470-dock-fix" is provided, so that users with such a machine can apply it manually. When model=tpt470-dock-fix option is passed to snd-hda-intel module, it avoids the fixed DAC pairing and the DAC1 is assigned to the speaker like the earlier versions. Fixes: 54947cd6 ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570") BugLink: https://apibugzilla.suse.com/show_bug.cgi?id=1172017 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200526062406.9799-1-tiwai@suse.deSigned-off-by:
-
Changming Liu authored
[ Upstream commit fb8cd648 ] The "info.index" variable can be 31 in "1 << info.index". This might trigger an undefined behavior since 1 is signed. Fix this by casting 1 to 1u just to be sure "1u << 31" is defined. Signed-off-by:
Changming Liu <liu.changm@northeastern.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BL0PR06MB4548170B842CB055C9AF695DE5B00@BL0PR06MB4548.namprd06.prod.outlook.comSigned-off-by:
-
Qiushi Wu authored
[ Upstream commit db857e6a ] In function pvrdma_pci_probe(), pdev was not disabled in one error path. Thus replace the jump target “err_free_device” by "err_disable_pdev". Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver") Link: https://lore.kernel.org/r/20200523030457.16160-1-wu000273@umn.eduSigned-off-by:
Qiushi Wu <wu000273@umn.edu> Signed-off-by:
-
Peng Hao authored
[ Upstream commit 202500d2 ] The data structure member “rpmb->md” was passed to a call of the function “mmc_blk_put” after a call of the function “put_device”. Reorder these function calls to keep the data accesses consistent. Fixes: 1c87f735 ("mmc: block: Fix bug when removing RPMB chardev ") Signed-off-by:
Peng Hao <richard.peng@oppo.com> Cc: stable@vger.kernel.org [Uffe: Fixed up mangled patch and updated commit message] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Hamish Martin authored
[ Upstream commit be0ec060 ] These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec7 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by:
Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vincent Stehlé authored
[ Upstream commit 58bb90ab ] The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Robert Beckett authored
[ Upstream commit 665e7c73 ] Avoid LDB and IPU DI clocks both using the same parent. LDB requires pasthrough clock to avoid breaking timing while IPU DI does not. Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV. This fixes an issue where attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI that was done during the same modeset. Cc: stable@vger.kernel.org Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> [Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M originally chosen by Robert Beckett to avoid affecting eMMC clock by DRM atomic updates] Signed-off-by:
Ian Ray <ian.ray@ge.com> [Squash Robert's and Ian's commits for bisectability, update patch description and add stable tag] Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Kaike Wan authored
[ Upstream commit a35cd644 ] When kobject_init_and_add() returns an error in the function qib_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released along with other kobjects when the sysfs is unregistered. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Suggested-by:
Lin Yi <teroincn@gmail.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
-
Takashi Iwai authored
[ Upstream commit 333830aa ] The commit 7ecced09 ("gpio: exar: add a check for the return value of ida_simple_get fails") added a goto jump to the common error handler for ida_simple_get() error, but this is wrong in two ways: it doesn't set the proper return code and, more badly, it invokes ida_simple_remove() with a negative index that shall lead to a kernel panic via BUG_ON(). This patch addresses those two issues. Fixes: 7ecced09 ("gpio: exar: add a check for the return value of ida_simple_get fails") Cc: <stable@vger.kernel.org> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 71f8af11 ] Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ) fails to fix up alignment faults, eventually resulting in a kernel oops. The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit e6978e4b ("ARM: save and reset the address limit when entering an exception"). This is because the address limit is set back to TASK_SIZE on exception entry, and, although it is restored on exception exit, the domain register is not. Hence, this sequence can occur: interrupt pt_regs->addr_limit = addr_limit // USER_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER interrupt pt_regs->addr_limit = addr_limit // KERNEL_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER ... set_fs(old_fs) addr_limit = USER_DS dacr.kernel = DOMAIN_CLIENT ... addr_limit = pt_regs->addr_limit // KERNEL_DS interrupt returns At this point, addr_limit is correctly restored to KERNEL_DS for __probe_kernel_read() to continue execution, but dacr.kernel is not, it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT. This would not have happened prior to the mentioned commit, because addr_limit would remain KERNEL_DS, so get_fs() would have returned KERNEL_DS, and so would correctly nest. This commit fixes the problem by also saving the DACR on exception entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are enabled, and resetting the DACR appropriately on exception entry to match addr_limit and PAN settings. Fixes: e6978e4b ("ARM: save and reset the address limit when entering an exception") Reported-by:
Tomas Paukrt <tomas.paukrt@advantech.cz> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
[ Upstream commit 8ede890b ] Integrate uaccess_save / uaccess_restore macros into the new uaccess_entry / uaccess_exit macros respectively. Signed-off-by:
-
Russell King authored
[ Upstream commit 747ffc2f ] Consolidate the user access assembly code to asm/uaccess-asm.h. This moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable, uaccess_disable, uaccess_save, uaccess_restore macros, and creates two new ones for exception entry and exit - uaccess_entry and uaccess_exit. This makes the uaccess_save and uaccess_restore macros private to asm/uaccess-asm.h. Signed-off-by:
-
Stefan Agner authored
[ Upstream commit c001899a ] Use unified assembler syntax (UAL) in headers. Divided syntax is considered deprecated. This will also allow to build the kernel using LLVM's integrated assembler. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
Łukasz Stelmach authored
[ Upstream commit 2c962369 ] The size field of the tag header structure is supposed to be set to the size of a tag structure including the header. Fixes: c7725687 ("ARM: add additional table to compressed kernel") Signed-off-by:
Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 5caab2da ] Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Evan Green authored
[ Upstream commit d5a5e5b5 ] Fix a use-after-free noticed by running with KASAN enabled. If rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among others) will end up reading from drvdata->attn_data.data, which was freed and left dangling in rmi_irq_fn(). Commit 55edde9f ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") correctly identified and analyzed this bug. However the attempted fix only NULLed out a local variable, missing the fact that drvdata->attn_data is a struct, not a pointer. NULL out the correct pointer in the driver data to prevent the attention functions from copying from it. Fixes: 55edde9f ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") Fixes: b908d3cd ("Input: synaptics-rmi4 - allow to add attention data") Signed-off-by:
Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeidSigned-off-by:
-
Kevin Locke authored
[ Upstream commit 2712c91a ] On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5] Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txtSigned-off-by:
Kevin Locke <kevin@kevinlocke.name> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.nameSigned-off-by:
-
Christophe JAILLET authored
[ Upstream commit 38347374 ] According to the file name and Kconfig, a 'k' is missing in this driver name. It should be "dlink-dir685-touchkeys". Fixes: 131b3de7 ("Input: add D-Link DIR-685 touchkeys driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200412213937.5287-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Łukasz Patron authored
[ Upstream commit 764f7f91 ] Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by:
Łukasz Patron <priv.luk@gmail.com> Reviewed-by:
Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.comSigned-off-by:
-
Brendan Shanks authored
[ Upstream commit 09264098 ] input_flush_device() should only be called once the struct file is being released and no open descriptors remain, but evdev_flush() was calling it whenever a file descriptor was closed. This caused uploaded force-feedback effects to be erased when a process did a dup()/close() on the event FD, called system(), etc. Call input_flush_device() from evdev_release() instead. Reported-by:
Mathieu Maret <mathieu.maret@gmail.com> Signed-off-by:
Brendan Shanks <bshanks@codeweavers.com> Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com Cc: stable@vger.kernel.org Signed-off-by:
-
James Hilliard authored
[ Upstream commit e3b4f94e ] Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Matteo Croce authored
[ Upstream commit 23ad0466 ] GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains a symbol which clashes with libbpf: /usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here collect2: error: ld returned 1 exit status bpf_log_buf here seems to be a leftover, so removing it. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.comSigned-off-by:
-
Steve French authored
[ Upstream commit 9bd21d4b ] Coverity scan noted a redundant null check Coverity-id: 728517 Reported-by:
Coverity <scan-admin@coverity.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Shyam Prasad N <nspmangalore@gmail.com> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 0502bee3 ] Drop static declaration to fix following build error if FRAME_POINTER disabled, riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0': perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe' Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Denis V. Lunev authored
[ Upstream commit 856ec7f6 ] Local variable netdev is not used in these calls. It should be noted, that this change is required to work in bonded mode. Otherwise we would get the following assert: "RTNL: assertion failed at net/core/dev.c (5665)" With the calltrace as follows: dump_stack+0x19/0x1b netdev_master_upper_dev_get+0x61/0x70 i40iw_addr_resolve_neigh+0x1e8/0x220 i40iw_make_cm_node+0x296/0x700 ? i40iw_find_listener.isra.10+0xcc/0x110 i40iw_receive_ilq+0x3d4/0x810 i40iw_puda_poll_completion+0x341/0x420 i40iw_process_ceq+0xa5/0x280 i40iw_ceq_dpc+0x1e/0x40 tasklet_action+0x83/0x140 __do_softirq+0x125/0x2bb call_softirq+0x1c/0x30 do_softirq+0x65/0xa0 irq_exit+0x105/0x110 do_IRQ+0x56/0xf0 common_interrupt+0x16a/0x16a ? cpuidle_enter_state+0x57/0xd0 cpuidle_idle_call+0xde/0x230 arch_cpu_idle+0xe/0xc0 cpu_startup_entry+0x14a/0x1e0 start_secondary+0x1f7/0x270 start_cpu+0x5/0x14 Link: https://lore.kernel.org/r/20200428131511.11049-1-den@openvz.orgSigned-off-by:
Denis V. Lunev <den@openvz.org> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 99352c79 ] I ran into a randconfig build failure with CONFIG_FIXED_PHY=m and CONFIG_GIANFAR=y: x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier' It seems the same thing can happen with dpaa and ucc_geth, so change all three to do an explicit 'select FIXED_PHY'. The fixed-phy driver actually has an alternative stub function that theoretically allows building network drivers when fixed-phy is disabled, but I don't see how that would help here, as the drivers presumably would not work then. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit d13cce75 ] Fix the following cppcheck warnings: drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$ value = -EOPNOTSUPP; ^ drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized int value = -EOPNOTSUPP; ^ drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten value = -EOPNOTSUPP; ^ drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$ value = -EINVAL; ^ drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized ssize_t value = len, length = len; ^ drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten value = -EINVAL; ^ Acked-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 066c0959 ] Intel Merrifield provides a DR support via PMIC which has its own extcon driver. Add a property string to link to that driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Lei Xue authored
[ Upstream commit 7bb0c533 ] There is a potential race in fscache operation enqueuing for reading and copying multiple pages from cachefiles to netfs. The problem can be seen easily on a heavy loaded system (for example many processes reading files continually on an NFS share covered by fscache triggered this problem within a few minutes). The race is due to cachefiles_read_waiter() adding the op to the monitor to_do list and then then drop the object->work_lock spinlock before completing fscache_enqueue_operation(). Once the lock is dropped, cachefiles_read_copier() grabs the op, completes processing it, and makes it through fscache_retrieval_complete() which sets the op->state to the final state of FSCACHE_OP_ST_COMPLETE(4). When cachefiles_read_waiter() finally gets through the remainder of fscache_enqueue_operation() it sees the invalid state, and hits the ASSERTCMP and the following oops is seen: [ 2259.612361] FS-Cache: [ 2259.614785] FS-Cache: Assertion failed [ 2259.618639] FS-Cache: 4 == 5 is false [ 2259.622456] ------------[ cut here ]------------ [ 2259.627190] kernel BUG at fs/fscache/operation.c:70! ... [ 2259.791675] RIP: 0010:[<ffffffffc061b4cf>] [<ffffffffc061b4cf>] fscache_enqueue_operation+0xff/0x170 [fscache] [ 2259.802059] RSP: 0000:ffffa0263d543be0 EFLAGS: 00010046 [ 2259.807521] RAX: 0000000000000019 RBX: ffffa01a4d390480 RCX: 0000000000000006 [ 2259.814847] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffffa0263d553890 [ 2259.822176] RBP: ffffa0263d543be8 R08: 0000000000000000 R09: ffffa0263c2d8708 [ 2259.829502] R10: 0000000000001e7f R11: 0000000000000000 R12: ffffa01a4d390480 [ 2259.844483] R13: ffff9fa9546c5920 R14: ffffa0263d543c80 R15: ffffa0293ff9bf10 [ 2259.859554] FS: 00007f4b6efbd700(0000) GS:ffffa0263d540000(0000) knlGS:0000000000000000 [ 2259.875571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2259.889117] CR2: 00007f49e1624ff0 CR3: 0000012b38b38000 CR4: 00000000007607e0 [ 2259.904015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2259.918764] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2259.933449] PKRU: 55555554 [ 2259.943654] Call Trace: [ 2259.953592] <IRQ> [ 2259.955577] [<ffffffffc03a7c12>] cachefiles_read_waiter+0x92/0xf0 [cachefiles] [ 2259.978039] [<ffffffffa34d3942>] __wake_up_common+0x82/0x120 [ 2259.991392] [<ffffffffa34d3a63>] __wake_up_common_lock+0x83/0xc0 [ 2260.004930] [<ffffffffa34d3510>] ? task_rq_unlock+0x20/0x20 [ 2260.017863] [<ffffffffa34d3ab3>] __wake_up+0x13/0x20 [ 2260.030230] [<ffffffffa34c72a0>] __wake_up_bit+0x50/0x70 [ 2260.042535] [<ffffffffa35bdcdb>] unlock_page+0x2b/0x30 [ 2260.054495] [<ffffffffa35bdd09>] page_endio+0x29/0x90 [ 2260.066184] [<ffffffffa368fc81>] mpage_end_io+0x51/0x80 CPU1 cachefiles_read_waiter() 20 static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode, 21 int sync, void *_key) 22 { ... 61 spin_lock(&object->work_lock); 62 list_add_tail(&monitor->op_link, &op->to_do); 63 spin_unlock(&object->work_lock); <begin race window> 64 65 fscache_enqueue_retrieval(op); 182 static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op) 183 { 184 fscache_enqueue_operation(&op->op); 185 } 58 void fscache_enqueue_operation(struct fscache_operation *op) 59 { 60 struct fscache_cookie *cookie = op->object->cookie; 61 62 _enter("{OBJ%x OP%x,%u}", 63 op->object->debug_id, op->debug_id, atomic_read(&op->usage)); 64 65 ASSERT(list_empty(&op->pend_link)); 66 ASSERT(op->processor != NULL); 67 ASSERT(fscache_object_is_available(op->object)); 68 ASSERTCMP(atomic_read(&op->usage), >, 0); <end race window> CPU2 cachefiles_read_copier() 168 while (!list_empty(&op->to_do)) { ... 202 fscache_end_io(op, monitor->netfs_page, error); 203 put_page(monitor->netfs_page); 204 fscache_retrieval_complete(op, 1); CPU1 58 void fscache_enqueue_operation(struct fscache_operation *op) 59 { ... 69 ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS, 70 op->state, ==, FSCACHE_OP_ST_CANCELLED); Signed-off-by:
Lei Xue <carmark.dlut@gmail.com> Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Bob Peterson authored
[ Upstream commit 4ed0c308 ] Before this patch, function gfs2_quota_lock checked if it was called from a privileged user, and if so, it bypassed the quota check: superuser can operate outside the quotas. That's the wrong place for the check because the lock/unlock functions are separate from the lock_check function, and you can do lock and unlock without actually checking the quotas. This patch moves the check to gfs2_quota_lock_check. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit ff8ce319 ] This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove. Add the missed kthread_stop() to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrew Oakley authored
[ Upstream commit da7a8f1a ] This is another TRX40 based motherboard with ALC1220-VB USB-audio that requires a static mapping table. This motherboard also has a PCI device which advertises no codecs. The PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD vendor ID, don't blacklist for now in case other boards have a working audio device with the same ssid. alsa-info.sh report for this board: http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70cSigned-off-by:
Andrew Oakley <andrew@adoakley.name> Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.nameSigned-off-by:
-
Stephen Warren authored
[ Upstream commit 0cf253ee ] The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ client has released the GPIO IRQ. This allows the HW to raise IRQs, and SW to process them, after shutdown. Fix this by masking the IRQ when it's shut down. This is usually taken care of by the irqchip core, but since this driver has a custom irq_shutdown implementation, it must do this explicitly itself. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Link: https://lore.kernel.org/r/20200427232605.11608-1-swarren@wwwdotorg.orgSigned-off-by:
-
Johan Jonker authored
[ Upstream commit 855bdca1 ] A test with the command below gives these errors: arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1: '#address-cells' is a required property The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.comSigned-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
