1. 11 Feb, 2013 30 commits
  2. 01 Feb, 2013 3 commits
  3. 31 Jan, 2013 7 commits
    • Linus Torvalds's avatar
      Merge branch 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · cf5425bf
      Linus Torvalds authored
      PullHID fixes from Jiri Kosina:
      
       - fix i2c-hid and hidraw interaction, by Benjamin Tissoires
      
       - a quirk to make a particular device (Formosa IR receiver) work
         properly, by Nicholas Santos
      
      * 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: i2c-hid: fix i2c_hid_output_raw_report
        HID: usbhid: quirk for Formosa IR receiver
        HID: remove x bit from sensor doc
      cf5425bf
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · bf6c8a81
      Linus Torvalds authored
      Pull NFS client bugfixes from Trond Myklebust:
      
       - Error reporting in nfs_xdev_mount incorrectly maps all errors to
         ENOMEM
      
       - Fix an NFSv4 refcounting issue
      
       - Fix a mount failure when the server reboots during NFSv4 trunking
         discovery
      
       - NFSv4.1 mounts may need to run the lease recovery thread.
      
       - Don't silently fail setattr() requests on mountpoints
      
       - Fix a SUNRPC socket/transport livelock and priority queue issue
      
       - We must handle NFS4ERR_DELAY when resetting the NFSv4.1 session.
      
      * tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session
        SUNRPC: When changing the queue priority, ensure that we change the owner
        NFS: Don't silently fail setattr() requests on mountpoints
        NFSv4.1: Ensure that nfs41_walk_client_list() does start lease recovery
        NFSv4: Fix NFSv4 trunking discovery
        NFSv4: Fix NFSv4 reference counting for trunked sessions
        NFS: Fix error reporting in nfs_xdev_mount
      bf6c8a81
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · aeb8eede
      Linus Torvalds authored
      Pull MIPS updates from Ralf Baechle:
       "A number of fixes all across the MIPS tree.  No area is particularly
        standing out and things have cooled down quite nicely for a release."
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: Function tracer: Fix broken function tracing
        mips: Move __virt_addr_valid() to a place for MIPS 64
        MIPS: Netlogic: Fix UP compilation on XLR
        MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE
        MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE
        MIPS: Lantiq: Fix cp0_perfcount_irq mapping
        MIPS: DSP: Fix DSP mask for registers.
        MIPS: Fix build failure by adding definition of pfn_pmd().
        MIPS: Octeon: Fix warning.
        MIPS: delay.c: Check BITS_PER_LONG instead of __SIZEOF_LONG__
        MIPS: PNX833x: Fix comment.
        MIPS: Add struct p_format to union mips_instruction.
        MIPS: Export <asm/break.h>.
        MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE.
        MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platform
        MIPS: vpe.c: Fix null pointer dereference in print arguments.
      aeb8eede
    • Benjamin Tissoires's avatar
      HID: i2c-hid: fix i2c_hid_output_raw_report · c284979a
      Benjamin Tissoires authored
      i2c_hid_output_raw_report is used by hidraw to forward set_report requests.
      The current implementation of i2c_hid_set_report needs to take the
      report_id as an argument. The report_id is stored in the first byte
      of the buffer in argument of i2c_hid_output_raw_report.
      
      Not removing the report_id from the given buffer adds this byte 2 times
      in the command, leading to a non working command.
      Reported-by: default avatarAndrew Duggan <aduggan@synaptics.com>
      Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@gmail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      c284979a
    • Al Cooper's avatar
      MIPS: Function tracer: Fix broken function tracing · 58b69401
      Al Cooper authored
      Function tracing is currently broken for all 32 bit MIPS platforms.
      When tracing is enabled, the kernel immediately hangs on boot.
      This is a result of commit b732d439
      that changes the kernel/trace/Kconfig file so that is no longer
      forces FRAME_POINTER when FUNCTION_TRACING is enabled.
      
      MIPS frame pointers are generally considered to be useless because
      they cannot be used to unwind the stack. Unfortunately the MIPS
      function tracing code has bugs that are masked by the use of frame
      pointers. This commit fixes the bugs so that MIPS frame pointers
      don't need to be enabled.
      
      The bugs are a result of the odd calling sequence used to call the trace
      routine. This calling sequence is inserted into every traceable function
      when the tracing CONFIG option is enabled. This sequence is generated
      for 32bit MIPS platforms by the compiler via the "-pg" flag.
      
      Part of the sequence is "addiu sp,sp,-8" in the delay slot after every
      call to the trace routine "_mcount" (some legacy thing where 2 arguments
      used to be pushed on the stack). The _mcount routine is expected to
      adjust the sp by +8 before returning.  So when not disabled, the original
      jalr and addiu will be there, so _mcount has to adjust sp.
      
      The problem is that when tracing is disabled for a function, the
      "jalr _mcount" instruction is replaced with a nop, but the
      "addiu sp,sp,-8" is still executed and the stack pointer is left
      trashed. When frame pointers are enabled the problem is masked
      because any access to the stack is done through the frame
      pointer and the stack pointer is restored from the frame pointer when
      the function returns.
      
      This patch writes two nops starting at the address of the "jalr _mcount"
      instruction whenever tracing is disabled. This means that the
      "addiu sp,sp.-8" will be converted to a nop along with the "jalr".  When
      disabled, there will be two nops.
      
      This is SMP safe because the first time this happens is during
      ftrace_init() which is before any other processor has been started.
      Subsequent calls to enable/disable tracing when other CPUs ARE running
      will still be safe because the enable will only change the first nop
      to a "jalr" and the disable, while writing 2 nops, will only be changing
      the "jalr". This patch also stops using stop_machine() to call the
      tracer enable/disable routines and calls them directly because the
      routines are SMP safe.
      
      When the kernel first boots we have to be able to handle the gcc
      generated jalr, addui sequence until ftrace_init gets a chance to run
      and change the sequence. At this point mcount just adjusts the stack
      and returns. When ftrace_init runs, we convert the jalr/addui to nops.
      Then whenever tracing is enabled we convert the first nop to a "jalr
      mcount+8". The mcount+8 entry point skips the stack adjust.
      
      [ralf@linux-mips.org: Folded in  Steven Rostedt's build fix.]
      Signed-off-by: default avatarAl Cooper <alcooperx@gmail.com>
      Cc: rostedt@goodmis.org
      Cc: ddaney.cavm@gmail.com
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/4806/
      Patchwork: https://patchwork.linux-mips.org/patch/4841/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      58b69401
    • Alasdair G Kergon's avatar
      dm: fix write same requests counting · fe7af2d3
      Alasdair G Kergon authored
      When processing write same requests, fix dm to send the configured
      number of WRITE SAME requests to the target rather than the number of
      discards, which is not always the same.
      
      Device-mapper WRITE SAME support was introduced by commit
      23508a96 ("dm: add WRITE SAME support").
      Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      Acked-by: default avatarMike Snitzer <snitzer@redhat.com>
      fe7af2d3
    • Steven Rostedt's avatar
      mips: Move __virt_addr_valid() to a place for MIPS 64 · 196897a2
      Steven Rostedt authored
      Commit d3ce8843 "MIPS: Fix modpost error in modules attepting to use
      virt_addr_valid()" moved __virt_addr_valid() from a macro in a header
      file to a function in ioremap.c. But ioremap.c is only compiled for MIPS
      32, and not for MIPS 64.
      
      When compiling for my yeeloong2, which supposedly supports hibernation,
      which compiles kernel/power/snapshot.c which calls virt_addr_valid(), I
      got this error:
      
        LD      init/built-in.o
      kernel/built-in.o: In function `memory_bm_free':
      snapshot.c:(.text+0x4c9c4): undefined reference to `__virt_addr_valid'
      snapshot.c:(.text+0x4ca58): undefined reference to `__virt_addr_valid'
      kernel/built-in.o: In function `snapshot_write_next':
      (.text+0x4e44c): undefined reference to `__virt_addr_valid'
      kernel/built-in.o: In function `snapshot_write_next':
      (.text+0x4e890): undefined reference to `__virt_addr_valid'
      make[1]: *** [vmlinux] Error 1
      make: *** [sub-make] Error 2
      
      I suspect that __virt_addr_valid() is fine for mips 64. I moved it to
      mmap.c such that it gets compiled for mips 64 and 32.
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/4842/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      196897a2