Skip to content

L
linux
Switch branch/tag
  1. 27 Sep, 2023 11 commits
  3. 25 Sep, 2023 1 commit
  5. 24 Sep, 2023 4 commits
    • Liu Ying's avatar
      arm64: dts: imx8mm-evk: Fix hdmi@3d node · efa97aed
      Liu Ying authored 
      The hdmi@3d node's compatible string is "adi,adv7535" instead of
"adi,adv7533" or "adi,adv751*".

Fix the hdmi@3d node by means of:
* Use default register addresses for "cec", "edid" and "packet", because
  there is no need to use a non-default address map.
* Add missing interrupt related properties.
* Drop "adi,input-*" properties which are only valid for adv751*.
* Add VDDEXT_3V3 fixed regulator
* Add "*-supply" properties, since most are required.
* Fix label names - s/adv7533/adv7535/.

Fixes: a27335b3 ("arm64: dts: imx8mm-evk: Add HDMI support")
Signed-off-by: default avatarLiu Ying <victor.liu@nxp.com>
Tested-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      efa97aed
    • Nathan Rossi's avatar
      soc: imx8m: Enable OCOTP clock for imx8mm before reading registers · 9d1e8275
      Nathan Rossi authored 
      Commit 836fb309 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.

This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.
Signed-off-by: default avatarNathan Rossi <nathan.rossi@digi.com>
Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
Fixes: 836fb309 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      9d1e8275
    • Adam Ford's avatar
      arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock · 161af16c
      Adam Ford authored 
      Commit 16c98452 ("arm64: dts: imx8mp: don't initialize audio clocks
from CCM node") removed the Audio clocks from the main clock node, because
the intent is to force people to setup the audio PLL clocks per board
instead of having a common set of rates since not all boards may use
the various audio PLL clocks for audio devices.

This resulted in an incorrect clock rate when attempting to playback
audio, since the AUDIO_PLL2 wasn't set any longer. Fix this by
setting the AUDIO_PLL2 rate inside the SAI3 node since it's the SAI3
that needs it.

Fixes: 16c98452 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node")
Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Reviewed-by: default avatarLucas Stach <l.stach@pengutronix.de>
Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      161af16c
    • Adam Ford's avatar
      arm64: dts: imx8mp: Fix SDMA2/3 clocks · b739681b
      Adam Ford authored 
      Commit 16c98452 ("arm64: dts: imx8mp: don't initialize audio clocks
from CCM node") removed the Audio clocks from the main clock node, because
the intent is to force people to setup the audio PLL clocks per board
instead of having a common set of rates, since not all boards may use
the various audio PLL clocks in the same way.

Unfortunately, with this parenting removed, the SDMA2 and SDMA3
clocks were slowed to 24MHz because the SDMA2/3 clocks are controlled
via the audio_blk_ctrl which is clocked from IMX8MP_CLK_AUDIO_ROOT,
and that clock is enabled by pgc_audio.

Per the TRM, "The SDMA2/3 target frequency is 400MHz IPG and 400MHz
AHB, always 1:1 mode, to make sure there is enough throughput for all
the audio use cases."

Instead of cluttering the clock node, place the clock rate and parent
information into the pgc_audio node.

With the parenting and clock rates restored for  IMX8MP_CLK_AUDIO_AHB,
and IMX8MP_CLK_AUDIO_AXI_SRC, it appears the SDMA2 and SDMA3 run at
400MHz again.

Fixes: 16c98452 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node")
Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Reviewed-by: default avatarLucas Stach <l.stach@pengutronix.de>
Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      b739681b
  7. 20 Sep, 2023 1 commit
  9. 19 Sep, 2023 1 commit
  11. 15 Sep, 2023 1 commit
  13. 13 Sep, 2023 9 commits
  15. 12 Sep, 2023 1 commit
  17. 11 Sep, 2023 2 commits
    • Adam Ford's avatar
      bus: ti-sysc: Fix missing AM35xx SoC matching · 11729caa
      Adam Ford authored 
      Commit feaa8bae ("bus: ti-sysc: Implement SoC revision handling")
created a list of SoC types searching for strings based on names
and wildcards which associates the SoC to different families.

The OMAP34xx and OMAP35xx are treated as SOC_3430 while
OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx
isn't listed.

The AM35xx is mostly an OMAP3430, and a later commit a12315d6
("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks
for the SOC type and behaves in a certain way if it's SOC_3430.

This caused a regression on the AM3517 causing it to return two
errors:

 ti-sysc: probe of 48318000.target-module failed with error -16
 ti-sysc: probe of 49032000.target-module failed with error -16

Fix this by treating the creating SOC_AM35 and inserting it between
the SOC_3430 and SOC_3630.  If it is treaed the same way as the
SOC_3430 when checking the status of sysc_check_active_timer,
the error conditions will disappear.

Fixes: a12315d6 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes: feaa8bae ("bus: ti-sysc: Implement SoC revision handling")
Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Message-ID: <20230906233442.270835-1-aford173@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      11729caa
    • Julien Panis's avatar
      bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset() · d929b2b7
      Julien Panis authored 
      The am335x-evm started producing boot errors because of subtle timing
changes:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010
...
sysc_reset from sysc_probe+0xf60/0x1514
sysc_probe from platform_probe+0x5c/0xbc
...

The fix consists in using the appropriate sleep function in sysc reset.
For flexible sleeping, fsleep is recommended. Here, sysc delay parameter
can take any value in [0 - 255] us range. As a result, fsleep() should
be used, calling udelay() for a sysc delay lower than 10 us.
Signed-off-by: default avatarJulien Panis <jpanis@baylibre.com>
Fixes: e709ed70 ("bus: ti-sysc: Fix missing reset delay handling")
Message-ID: <20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      d929b2b7
  19. 10 Sep, 2023 6 commits
    • Linus Torvalds's avatar
      Linux 6.6-rc1 · 0bb80ecc
      Linus Torvalds authored
      0bb80ecc
    • Linus Torvalds's avatar
      Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm · 1548b060
      Linus Torvalds authored 
      Pull drm ci scripts from Dave Airlie:
 "This is a bunch of ci integration for the freedesktop gitlab instance
  where we currently do upstream userspace testing on diverse sets of
  GPU hardware. From my perspective I think it's an experiment worth
  going with and seeing how the benefits/noise playout keeping these
  files useful.

  Ideally I'd like to get this so we can do pre-merge testing on PRs
  eventually.

  Below is some info from danvet on why we've ended up making the
  decision and how we can roll it back if we decide it was a bad plan.

  Why in upstream?

   - like documentation, testcases, tools CI integration is one of these
     things where you can waste endless amounts of time if you
     accidentally have a version that doesn't match your source code

   - but also like the above, there's a balance, this is the initial cut
     of what we think makes sense to keep in sync vs out-of-tree,
     probably needs adjustment

   - gitlab supports out-of-repo gitlab integration and that's what's
     been used for the kernel in drm, but it results in per-driver
     fragmentation and lots of duplicated effort. the simple act of
     smashing an arbitrary winner into a topic branch already started
     surfacing patches on dri-devel and sparking good cross driver team
     discussions

  Why gitlab?

   - it's not any more shit than any of the other CI

   - drm userspace uses it extensively for everything in userspace, we
     have a lot of people and experience with this, including
     integration of hw testing labs

   - media userspace like gstreamer is also on gitlab.fd.o, and there's
     discussion to extend this to the media subsystem in some fashion

  Can this be shared?

   - there's definitely a pile of code that could move to scripts/ if
     other subsystem adopt ci integration in upstream kernel git. other
     bits are more drm/gpu specific like the igt-gpu-tests/tools
     integration

   - docker images can be run locally or in other CI runners

  Will we regret this?

   - it's all in one directory, intentionally, for easy deletion

   - probably 1-2 years in upstream to see whether this is worth it or a
     Big Mistake. that's roughly what it took to _really_ roll out solid
     CI in the bigger userspace projects we have on gitlab.fd.o like
     mesa3d"

* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
  drm: ci: docs: fix build warning - add missing escape
  drm: Add initial ci/ subdirectory
      1548b060
    • Linus Torvalds's avatar
      Merge tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · e56b2b60
      Linus Torvalds authored 
      Pull x86 fixes from Ingo Molnar:
 "Fix preemption delays in the SGX code, remove unnecessarily
  UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
  make the x86 SMP init code a bit more conservative to fix kexec()
  lockups"

* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
  x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
  x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
  x86/smp: Don't send INIT to non-present and non-booted CPUs
      e56b2b60
    • Linus Torvalds's avatar
      Merge tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · e79dbf03
      Linus Torvalds authored 
      Pull x86 perf event fix from Ingo Molnar:
 "Work around a firmware bug in the uncore PMU driver, affecting certain
  Intel systems"

* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Correct the number of CHAs on EMR
      e79dbf03
    • Linus Torvalds's avatar
      Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of... · 535a265d
      Linus Torvalds authored 
      Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "perf tools maintainership:

   - Add git information for perf-tools and perf-tools-next trees and
     branches to the MAINTAINERS file. That is where development now
     takes place and myself and Namhyung Kim have write access, more
     people to come as we emulate other maintainer groups.

  perf record:

   - Record kernel data maps when 'perf record --data' is used, so that
     global variables can be resolved and used in tools that do data
     profiling.

  perf trace:

   - Remove the old, experimental support for BPF events in which a .c
     file was passed as an event: "perf trace -e hello.c" to then get
     compiled and loaded.

     The only known usage for that, that shipped with the kernel as an
     example for such events, augmented the raw_syscalls tracepoints and
     was converted to a libbpf skeleton, reusing all the user space
     components and the BPF code connected to the syscalls.

     In the end just the way to glue the BPF part and the user space
     type beautifiers changed, now being performed by libbpf skeletons.

     The next step is to use BTF to do pretty printing of all syscall
     types, as discussed with Alan Maguire and others.

     Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
     path/filenames/strings, some of the networking data structures,
     perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
     and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
     seconds:

      # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
         0.000 (   9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
         9.039 (   0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
             ? (           ): gpm/991  ... [continued]: clock_nanosleep())               = 0
        10.133 (           ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
             ? (           ): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
        30.276 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
       223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
        30.276 (2000.394 ms): gpm/991  ... [continued]: clock_nanosleep())               = 0
      1230.814 (           ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
      1230.814 (1000.404 ms): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
      2030.886 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
      2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
             ? (           ): crond/1172  ... [continued]: clock_nanosleep())            = 0
      3242.699 (           ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
      2030.886 (2000.385 ms): gpm/991  ... [continued]: clock_nanosleep())               = 0
      3728.078 (           ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
      3242.699 (1000.158 ms): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
      4031.409 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
        10.133 (5000.375 ms): sleep/327642  ... [continued]: clock_nanosleep())          = 0

      Performance counter stats for 'sleep 5':

             2,617,347      cycles
             1,855,997      instructions                     #    0.71  insn per cycle

           5.002282128 seconds time elapsed

           0.000855000 seconds user
           0.000852000 seconds sys

  perf annotate:

   - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
     for licensing reasons, and we missed a build test on
     tools/perf/tests makefile.

     Since we now default to NDEBUG=1, we ended up segfaulting when
     building with BUILD_NONDISTRO=1 because a needed initialization
     routine was being "error checked" via an assert.

     Fix it by explicitly checking the result and aborting instead if it
     fails.

     We better back propagate the error, but at least 'perf annotate' on
     samples collected for a BPF program is back working when perf is
     built with BUILD_NONDISTRO=1.

  perf report/top:

   - Add back TUI hierarchy mode header, that is seen when using 'perf
     report/top --hierarchy'.

   - Fix the number of entries for 'e' key in the TUI that was
     preventing navigation of lines when expanding an entry.

  perf report/script:

   - Support cross platform register handling, allowing a perf.data file
     collected on one architecture to have registers sampled correctly
     displayed when analysis tools such as 'perf report' and 'perf
     script' are used on a different architecture.

   - Fix handling of event attributes in pipe mode, i.e. when one uses:

  	perf record -o - | perf report -i -

     When no perf.data files are used.

   - Handle files generated via pipe mode with a version of perf and
     then read also via pipe mode with a different version of perf,
     where the event attr record may have changed, use the record size
     field to properly support this version mismatch.

  perf probe:

   - Accessing global variables from uprobes isn't supported, make the
     error message state that instead of stating that some minimal
     kernel version is needed to have that feature. This seems just a
     tool limitation, the kernel probably has all that is needed.

  perf tests:

   - Fix a reference count related leak in the dlfilter v0 API where the
     result of a thread__find_symbol_fb() is not matched with an
     addr_location__exit() to drop the reference counts of the resolved
     components (machine, thread, map, symbol, etc). Add a dlfilter test
     to make sure that doesn't regresses.

   - Lots of fixes for the 'perf test' written in shell script related
     to problems found with the shellcheck utility.

   - Fixes for 'perf test' shell scripts testing features enabled when
     perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
     counters.

   - Add perf record sample filtering test, things like the following
     example, that gets implemented as a BPF filter attached to the
     event:

       # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'

   - Improve the way the task_analyzer test checks if libtraceevent is
     linked, using 'perf version --build-options' instead of the more
     expensinve 'perf record -e "sched:sched_switch"'.

   - Add support for riscv in the mmap-basic test. (This went as well
     via the RiscV tree, same contents).

  libperf:

   - Implement riscv mmap support (This went as well via the RiscV tree,
     same contents).

  perf script:

   - New tool that converts perf.data files to the firefox profiler
     format so that one can use the visualizer at
     https://profiler.firefox.com/. Done by Anup Sharma as part of this
     year's Google Summer of Code.

     One can generate the output and upload it to the web interface but
     Anup also automated everything:

       perf script gecko -F 99 -a sleep 60

   - Support syscall name parsing on arm64.

   - Print "cgroup" field on the same line as "comm".

  perf bench:

   - Add new 'uprobe' benchmark to measure the overhead of uprobes
     with/without BPF programs attached to it.

   - breakpoints are not available on power9, skip that test.

  perf stat:

   - Add #num_cpus_online literal to be used in 'perf stat' metrics, and
     add this extra 'perf test' check that exemplifies its purpose:

  	TEST_ASSERT_VAL("#num_cpus_online",
                         expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
  	TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
  	TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);

  Miscellaneous:

   - Improve tool startup time by lazily reading PMU, JSON, sysfs data.

   - Improve error reporting in the parsing of events, passing YYLTYPE
     to error routines, so that the output can show were the parsing
     error was found.

   - Add 'perf test' entries to check the parsing of events
     improvements.

   - Fix various leak for things detected by -fsanitize=address, mostly
     things that would be freed at tool exit, including:

       - Free evsel->filter on the destructor.

       - Allow tools to register a thread->priv destructor and use it in
         'perf trace'.

       - Free evsel->priv in 'perf trace'.

       - Free string returned by synthesize_perf_probe_point() when the
         caller fails to do all it needs.

   - Adjust various compiler options to not consider errors some
     warnings when building with broken headers found in things like
     python, flex, bison, as we otherwise build with -Werror. Some for
     gcc, some for clang, some for some specific version of those, some
     for some specific version of flex or bison, or some specific
     combination of these components, bah.

   - Allow customization of clang options for BPF target, this helps
     building on gentoo where there are other oddities where BPF targets
     gets passed some compiler options intended for the native build, so
     building with WERROR=0 helps while these oddities are fixed.

   - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
     and 'perf lock', fixing some segfaults when handling some odd
     failures.

   - Add LTO build option.

   - Fix format of unordered lists in the perf docs
     (tools/perf/Documentation)

   - Overhaul the bison files, using constructs such as YYNOMEM.

   - Remove unused tokens from the bison .y files.

   - Add more comments to various structs.

   - A few LoongArch enablement patches.

  Vendor events (JSON):

   - Add JSON metrics for Yitian 710 DDR (aarch64). Things like:

  	EventName, BriefDescription
  	visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
  	visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
  	op_is_dqsosc_mpc	       , "A DQS Oscillator MPC command to DRAM.",
  	op_is_dqsosc_mrr	       , "A DQS Oscillator MRR command to DRAM.",
  	op_is_tcr_mrr		       , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",

   - Add AmpereOne metrics (aarch64).

   - Update N2 and V2 metrics (aarch64) and events using Arm telemetry
     repo.

   - Update scale units and descriptions of common topdown metrics on
     aarch64. Things like:
       - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
       - "BriefDescription": "Frontend bound L1 topdown metric",
       + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
       + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",

   - Update events for intel: meteorlake to 1.04, sapphirerapids to
     1.15, Icelake+ metric constraints.

   - Update files for the power10 platform"

* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
  perf parse-events: Fix driver config term
  perf parse-events: Fixes relating to no_value terms
  perf parse-events: Fix propagation of term's no_value when cloning
  perf parse-events: Name the two term enums
  perf list: Don't print Unit for "default_core"
  perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
  perf dlfilter: Avoid leak in v0 API test use of resolve_address()
  perf metric: Add #num_cpus_online literal
  perf pmu: Remove str from perf_pmu_alias
  perf parse-events: Make common term list to strbuf helper
  perf parse-events: Minor help message improvements
  perf pmu: Avoid uninitialized use of alias->str
  perf jevents: Use "default_core" for events with no Unit
  perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
  perf test shell stat_bpf_counters: Fix test on Intel
  perf test shell record_bpf_filter: Skip 6.2 kernel
  libperf: Get rid of attr.id field
  perf tools: Convert to perf_record_header_attr_id()
  libperf: Add perf_record_header_attr_id()
  perf tools: Handle old data in PERF_RECORD_ATTR
  ...
      535a265d
    • Linus Torvalds's avatar
      Merge tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 · fd3a5940
      Linus Torvalds authored 
      Pull smb client fixes from Steve French:

 - six smb3 client fixes including ones to allow controlling smb3
   directory caching timeout and limits, and one debugging improvement

 - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)

 - one minor spnego registry update

* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  spnego: add missing OID to oid registry
  smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
  cifs: update internal module version number for cifs.ko
  smb3: allow controlling maximum number of cached directories
  smb3: add trace point for queryfs (statfs)
  nls: Hide new NLS_UCS2_UTILS
  smb3: allow controlling length of time directory entries are cached with dir leases
  smb: propagate error code of extract_sharename()
      fd3a5940
  21. 09 Sep, 2023 3 commits
    • David Howells's avatar
      iov_iter: Kunit tests for page extraction · a3c57ab7
      David Howells authored 
      Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators.  ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction.  ITER_DISCARD isn't dealt with
either as that can't be extracted.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a3c57ab7
    • David Howells's avatar
      iov_iter: Kunit tests for copying to/from an iterator · 2d71340f
      David Howells authored 
      Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators.  ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction.  ITER_DISCARD isn't dealt with
either as that does nothing.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2d71340f
    • David Howells's avatar
      iov_iter: Fix iov_iter_extract_pages() with zero-sized entries · f741bd71
      David Howells authored 
      iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.

The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.

Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.

Fixes: 7d58fe73 ("iov_iter: Add a function to extract a page list from an iterator")
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f741bd71
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7