- 22 Jul, 2020 40 commits
-
-
Douglas Anderson authored
[ Upstream commit 299632e5 ] If a regmap has "fast_io" set then its lock function uses a spinlock. That doesn't work so well with the functions: * regmap_cache_only_write_file() * regmap_cache_bypass_write_file() Both of the above functions have the pattern: 1. Lock the regmap. 2. Call: debugfs_write_file_bool() copy_from_user() __might_fault() __might_sleep() Let's reorder things a bit so that we do all of our sleepable functions before we grab the lock. Fixes: d3dc5430 ("regmap: debugfs: Allow writes to cache state settings") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeidSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Krzysztof Kozlowski authored
[ Upstream commit d7adfe5f ] Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit a8f62f18 ] This reverts commit eb9aecd9 The above patch is supposed to fix a register index error on mt2701. It is not clear if the problem solved is a hang or just an invalid value returned, my guess is the second. The patch introduces, though, a new hang on MT8173 device making them unusable. So, seems reasonable, revert the patch because introduces a worst issue. The reason I send a revert instead of trying to fix the issue for MT8173 is because the information needed to fix the issue is in the datasheet and is not public. So I am not really able to fix it. Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173 devices. [ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001 [ 2.230421] Mem abort info: [ 2.233207] ESR = 0x96000021 [ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.241571] SET = 0, FnV = 0 [ 2.244623] EA = 0, S1PTW = 0 [ 2.247762] Data abort info: [ 2.250640] ISV = 0, ISS = 0x00000021 [ 2.254473] CM = 0, WnR = 0 [ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000 [ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707 [ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 2.280432] Modules linked in: [ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162 [ 2.289914] Hardware name: Google Elm (DT) [ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO) [ 2.298792] pc : mtk_read_temp+0xb8/0x1c8 [ 2.302793] lr : mtk_read_temp+0x7c/0x1c8 [ 2.306794] sp : ffff80001003b930 [ 2.310100] x29: ffff80001003b930 x28: 0000000000000000 [ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10 [ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090 [ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0 [ 2.331318] x21: 0000000000002710 x20: 00000000000001f4 [ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0 [ 2.341926] x17: 0000000000000001 x16: 0000000000000001 [ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000 [ 2.352535] x13: ffffffffffffffff x12: 0000000000000028 [ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8 [ 2.363143] x9 : 000000000000291b x8 : 0000000000000002 [ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004 [ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0 [ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001 [ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80 [ 2.389665] Call trace: [ 2.392105] mtk_read_temp+0xb8/0x1c8 [ 2.395760] of_thermal_get_temp+0x2c/0x40 [ 2.399849] thermal_zone_get_temp+0x78/0x160 [ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8 [ 2.409589] thermal_zone_device_update+0x34/0x48 [ 2.414286] of_thermal_set_mode+0x58/0x88 [ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8 [ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0 [ 2.429242] mtk_thermal_probe+0x690/0x7d0 [ 2.433333] platform_drv_probe+0x5c/0xb0 [ 2.437335] really_probe+0xe4/0x448 [ 2.440901] driver_probe_device+0xe8/0x140 [ 2.445077] device_driver_attach+0x7c/0x88 [ 2.449252] __driver_attach+0xac/0x178 [ 2.453082] bus_for_each_dev+0x78/0xc8 [ 2.456909] driver_attach+0x2c/0x38 [ 2.460476] bus_add_driver+0x14c/0x230 [ 2.464304] driver_register+0x6c/0x128 [ 2.468131] __platform_driver_register+0x50/0x60 [ 2.472831] mtk_thermal_driver_init+0x24/0x30 [ 2.477268] do_one_initcall+0x50/0x298 [ 2.481098] kernel_init_freeable+0x1ec/0x264 [ 2.485450] kernel_init+0x1c/0x110 [ 2.488931] ret_from_fork+0x10/0x1c [ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042) [ 2.498599] ---[ end trace e43e3105ed27dc99 ]--- [ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.511020] SMP: stopping secondary CPUs [ 2.514941] Kernel Offset: disabled [ 2.518421] CPU features: 0x090002,25006005 [ 2.522595] Memory Limit: none [ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]-- Cc: Michael Kao <michael.kao@mediatek.com> Fixes: eb9aecd9 ("thermal: mediatek: fix register index error") Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit ef75e14a ] This code reads from the array before verifying that "trig" is a valid index. If the index is wildly out of bounds then reading from an invalid address could lead to an Oops. Fixes: a8c66b68 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200709102936.GA20875@mwandaSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michał Mirosław authored
[ Upstream commit 30517ffe ] Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f9 ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
[ Upstream commit ed7815db ] A SPI transfer defines the _maximum_ speed of the SPI transfer. However the driver doesn't take into account that the clock divider is always rounded down (due to integer arithmetics). This results in a too high clock rate for the SPI transfer. E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the original code calculates a reg of "0", which results in a effective divider of "2" and a 12 MHz clock for the SPI transfer. This patch fixes the issue by using DIV_ROUND_UP() instead of a plain integer division. While there simplify the divider calculation for the CDR1 case, use order_base_2() instead of two ilog2() calculations. Fixes: 3558fe90 ("spi: sunxi: Add Allwinner A31 SPI controller driver") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200706143443.9855-2-mkl@pengutronix.deSigned-off-by:
-
Jerome Brunet authored
[ Upstream commit 95ca6f06 ] The peripheral clock of the RNG is missing for gxl while it is present for gxbb. Fixes: 1b3f6d14 ("ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200617125346.1163527-1-jbrunet@baylibre.comSigned-off-by:
-
Colin Ian King authored
[ Upstream commit 38b1927e ] Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Jonathan Cameron authored
[ Upstream commit f88eccca ] One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 40 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: 87aec56e ("iio: health: Add driver for the TI AFE4404 heart monitor") Reported-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Christoffer Nielsen authored
[ Upstream commit 73094608 ] Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud Alpha S (0951:0x16ea) uses two interfaces, but only the second interface contains the capture stream. This patch delays the registration until the second interface appears. Signed-off-by:
Christoffer Nielsen <cn@obviux.dk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Paul Menzel authored
[ Upstream commit c41c36e9 ] Currently, changing the brightness of the internal display of the Acer TravelMate 5735Z does not work. Pressing the function keys or changing the slider, GNOME Shell 3.36.2 displays the OSD (five steps), but the brightness does not change. The Acer TravelMate 5735Z shipped with Windows 7 and as such does not trigger our "win8 ready" heuristic for preferring the native backlight interface. Still ACPI backlight control doesn't work on this model, where as the native (intel_video) backlight interface does work by adding `acpi_backlight=native` or `acpi_backlight=none` to Linux’ command line. So, add a quirk to force using native backlight control on this model. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207835Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit 7842087b ] MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152. However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization. TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now. But we probably shouldn't print something from a random register. Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.netSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Emmanuel Pescosta authored
[ Upstream commit fd60e068 ] Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud Alpha S (0951:16d8) uses two interfaces, but only the second interface contains the capture stream. This patch delays the registration until the second interface appears. Signed-off-by:
Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Link: https://lore.kernel.org/r/20200404153843.9288-1-emmanuelpescosta099@gmail.comSigned-off-by:
-
Hans de Goede authored
[ Upstream commit 1c8fbc1f ] The Acer Aspire 5783z shipped with Windows 7 and as such does not trigger our "win8 ready" heuristic for prefering the native backlight interface. Still ACPI backlight control doesn't work on this model, where as the native (intel_video) backlight interface does work. Add a quirk to force using native backlight control on this model. Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit d8695bc5 ] A slight refactoring of the registration quirk code. Now it uses the table lookup for easy additions in future. Also the return type was changed to bool, and got a few more comments. Link: https://lore.kernel.org/r/20200325103322.2508-2-tiwai@suse.deSigned-off-by:
-
Haibo Chen authored
[ Upstream commit e65bb388 ] Except SDHCI_QUIRK_BROKEN_CARD_DETECTION and MMC_CAP_NONREMOVABLE, we also do not need to handle controller native card detect interrupt for gpio cd type. If we wrong enabled the card detect interrupt for gpio case, it will cause a lot of unexpected card detect interrupts during data transfer which should not happen. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1582100563-20555-2-git-send-email-haibo.chen@nxp.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Neil Armstrong authored
[ Upstream commit 3d157c28 ] This patch updates the documentation with the information related to the quirks that needs to be added for disabling all SuperSpeed XHCI instances in park mode. Cc: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by:
Tim <elatllat@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chris Wulff authored
[ Upstream commit 55f73261 ] Create a quirk that allows special processing and/or skipping the call to snd_card_register. For HyperX AMP, which uses two interfaces, but only has a capture stream in the second, this allows the capture stream to merge with the first PCM. Signed-off-by:
Chris Wulff <crwulff@gmail.com> Link: https://lore.kernel.org/r/20200314165449.4086-3-crwulff@gmail.comSigned-off-by:
-
Diego Elio Pettenò authored
[ Upstream commit 679b2ec8 ] This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.comReviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Claudiu Beznea authored
[ Upstream commit bb1a0e87 ] On SAM9X60 2 nop operations has to be introduced after setting WAITMODE bit in CKGR_MOR. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-9-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
-
Hans de Goede authored
[ Upstream commit 3045696d ] The ITE 8595 chip used in various 2-in-1 keyboard docks works fine with the hid-generic driver (minus the RF_KILL key) and also keeps working fine when swapping drivers, so there is no need to have it in the hid_have_special_driver list. Note the other 2 USB ids in hid-ite.c were never added to hid_have_special_driver. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Russell King authored
[ Upstream commit b0eae33b ] Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P modules are capable of 2500base-X, but incorrectly report their capabilities in the EEPROM. It seems rather common that GPON modules mis-report. Let's fix these modules by adding some quirks. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Russell King authored
[ Upstream commit b34bb2cb ] Add support for applying module quirks to the list of supported ethtool link modes. Signed-off-by:
-
Sasha Levin authored
This reverts commit 71f660a1. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Sasha Levin authored
This reverts commit 661f5686. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume" Signed-off-by:
-
Sasha Levin authored
This reverts commit c83258a7. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 5a8d7f12 ] Commit 209c65b6 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b6 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by:
-
Florian Fainelli authored
[ Upstream commit 8dbe4c5d ] of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b592 ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 3c525b69 ] During shutdown, the driver should unregister the SPI controller and stop the hardware. Otherwise the dspi_transfer_one_message() could wait on completion infinitely. Additionally, calling spi_unregister_controller() first in device shutdown reverse-matches the probe function, where SPI controller is registered at the end. Fixes: dc234825 ("spi: spi-fsl-dspi: Adding shutdown hook") Reported-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Angelo Dureghello authored
[ Upstream commit aa54c1c9 ] On ColdFire mcf54418, using DSPI_DMA_MODE mode, spi transfers at first boot stage are not succeding: m25p80 spi0.1: unrecognized JEDEC id bytes: 00, 00, 00 The reason is the SPI_SR initial value set by the driver, that is not clearing (not setting to 1) the RF_DF flag. After a tour on the dspi hw modules that use this driver(Vybrid, ColdFire and ls1021a) a better init value for SR register has been set. Signed-off-by:
Angelo Dureghello <angelo@sysam.it> Signed-off-by:
-
Jonathan Cameron authored
commit 3f9c6d38 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 32 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: eec96d1e ("iio: health: Add driver for the TI AFE4403 heart monitor") Reported-by:
-
Jonathan Cameron authored
commit 8db4afe1 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here there is no data leak possibility so use an explicit structure on the stack to ensure alignment and nice readable fashion. The forced alignment of ts isn't strictly necessary in this driver as the padding will be correct anyway (there isn't any). However it is probably less fragile to have it there and it acts as documentation of the requirement. Fixes: 713bbb4e ("iio: pressure: ms5611: Add triggered buffer support") Reported-by:
Tomasz Duszynski <tomasz.duszynski@octakon.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit 5c49056a upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. Explicit alignment of ts needed to ensure consistent padding on all architectures (particularly x86_32 with it's 4 byte alignment of s64) Fixes: e4a70e3e ("iio: humidity: add support to hts221 rh/temp combo device") Reported-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Navid Emamdoost authored
commit d88de040 upstream. Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Fixes: 03b262f2 ("iio:pressure: initial zpa2326 barometer support") Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Chuhong Yuan authored
commit d7369ae1 upstream. The function iio_device_register() was called in mma8452_probe(). But the function iio_device_unregister() was not called after a call of the function mma8452_set_freefall_mode() failed. Thus add the missed function call for one error case. Fixes: 1a965d40 ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Dinghao Liu authored
commit 0187294d upstream. When devm_regmap_init_i2c() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. For error paths after ak8974_set_power(), ak8974_detect() and ak8974_reset(), things are the same. However, When iio_triggered_buffer_setup() returns an error code, there will be two PM usgae counter decrements. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Fixes: 7c94a8b2 ("iio: magn: add a driver for AK8974") Reviewed-by:
-
Jonathan Cameron authored
commit ea5e7a7b upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. Fixes: 16bf793f ("iio: humidity: hdc100x: add triggered buffer support for HDC100X") Reported-by:
Matt Ranostay <matt.ranostay@konsulko.com> Cc: Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Jonathan Cameron authored
commit 838e00b1 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: 7c94a8b2 ("iio: magn: add a driver for AK8974") Reported-by:
-
Ard Biesheuvel authored
[ Upstream commit 5679b281 ] Commit f7b93d42 ("arm64/alternatives: use subsections for replacement sequences") moved the alternatives replacement sequences into subsections, in order to keep the as close as possible to the code that they replace. Unfortunately, this broke the logic in branch_insn_requires_update, which assumed that any branch into kernel executable code was a branch that required updating, which is no longer the case now that the code sequences that are patched in are in the same section as the patch site itself. So the only way to discriminate branches that require updating and ones that don't is to check whether the branch targets the replacement sequence itself, and so we can drop the call to kernel_text_address() entirely. Fixes: f7b93d42 ("arm64/alternatives: use subsections for replacement sequences") Reported-by:
Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 5f90786b ] The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
