- 11 Jul, 2024 4 commits
-
-
Dmitry Antipov authored
Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise. Reported-by: syzbot+ec0723ba9605678b14bf@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ec0723ba9605678b14bf Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jian Hui Lee authored
The below commit introduced a warning message when phy state is not in the states: PHY_HALTED, PHY_READY, and PHY_UP. commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") mtk-star-emac doesn't need mdiobus suspend/resume. To fix the warning message during resume, indicate the phy resume/suspend is managed by the mac when probing. Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by:
Jian Hui Lee <jianhui.lee@canonical.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240708065210.4178980-1-jianhui.lee@canonical.comSigned-off-by:
-
Vitaly Lifshits authored
Commit 861e8086 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") resolved a PHY access loss during suspend on Meteor Lake consumer platforms, but it affected corporate systems incorrectly. A better fix, working for both consumer and corporate systems, was proposed in commit bfd546a5 ("e1000e: move force SMBUS near the end of enable_ulp function"). However, it introduced a regression on older devices, such as [8086:15B8], [8086:15F9], [8086:15BE]. This patch aims to fix the secondary regression, by limiting the scope of the changes to Meteor Lake platforms only. Fixes: bfd546a5 ("e1000e: move force SMBUS near the end of enable_ulp function") Reported-by:
Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940Reported-by:
Dieter Mummenschanz <dmummenschanz@web.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936Signed-off-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. Fixes: b701a99e ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Reviewed-by:
Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240710001402.2758273-1-edumazet@google.comSigned-off-by:
-
- 10 Jul, 2024 2 commits
-
-
Aleksander Jan Bajkowski authored
The number of the currently released descriptor is never incremented which results in the same skb being released multiple times. Fixes: 504d4721 ("MIPS: Lantiq: Add ethernet driver") Reported-by:
Joe Perches <joe@perches.com> Closes: https://lore.kernel.org/all/fc1bf93d92bb5b2f99c6c62745507cc22f3a7b2d.camel@perches.com/Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240708205826.5176-1-olek2@wp.plSigned-off-by:
-
Michal Kubiak authored
The commit 6533e558 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. Fixes: 6533e558 ("i40e: Fix reset path while removing the driver") Signed-off-by:
Michal Kubiak <michal.kubiak@intel.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by:
-
- 09 Jul, 2024 7 commits
-
-
Hugh Dickins authored
X would not start in my old 32-bit partition (and the "n"-handling looks just as wrong on 64-bit, but for whatever reason did not show up there): "n" must be accumulated over all pages before it's added to "offset" and compared with "copy", immediately after the skb_frag_foreach_page() loop. Fixes: d2d30a37 ("net: allow skb_datagram_iter to be called from any context") Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Link: https://patch.msgid.link/fef352e8-b89a-da51-f8ce-04bc39ee6481@google.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-07-09 The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 1 day(s) which contain a total of 5 files changed, 81 insertions(+), 11 deletions(-). The main changes are: 1) Fix a use-after-free in a corner case where tcx_entry got released too early. Also add BPF test coverage along with the fix, from Daniel Borkmann. 2) Fix a kernel panic on Loongarch in sk_msg_recvmsg() which got triggered by running BPF sockmap selftests, from Geliang Tang. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: skmsg: Skip zero length skb in sk_msg_recvmsg selftests/bpf: Extend tcx tests to cover late tcx_entry release bpf: Fix too early release of tcx_entry ==================== Link: https://patch.msgid.link/20240709091452.27840-1-daniel@iogearbox.netSigned-off-by:
-
Ronald Wahl authored
When SMP is enabled and spinlocks are actually functional then there is a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi and ks8851_irq: watchdog: BUG: soft lockup - CPU#0 stuck for 27s! call trace: queued_spin_lock_slowpath+0x100/0x284 do_raw_spin_lock+0x34/0x44 ks8851_start_xmit_spi+0x30/0xb8 ks8851_start_xmit+0x14/0x20 netdev_start_xmit+0x40/0x6c dev_hard_start_xmit+0x6c/0xbc sch_direct_xmit+0xa4/0x22c __qdisc_run+0x138/0x3fc qdisc_run+0x24/0x3c net_tx_action+0xf8/0x130 handle_softirqs+0x1ac/0x1f0 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x1c call_on_irq_stack+0x3c/0x58 do_softirq_own_stack+0x1c/0x28 __irq_exit_rcu+0x54/0x9c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 __netif_schedule+0x6c/0x80 netif_tx_wake_queue+0x38/0x48 ks8851_irq+0xb8/0x2c8 irq_thread_fn+0x2c/0x74 irq_thread+0x10c/0x1b0 kthread+0xc8/0xd8 ret_from_fork+0x10/0x20 This issue has not been identified earlier because tests were done on a device with SMP disabled and so spinlocks were actually NOPs. Now use spin_(un)lock_bh for TX queue related locking to avoid execution of softirq work synchronously that would lead to a deadlock. Fixes: 3dc5d445 ("net: ks8851: Fix TX stall caused by TX buffer overrun") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by:
-
Aleksandr Mishin authored
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect data is printed to error log. 'req->sso' value is printed instead of 'req->ssow'. Looks like "copy-paste" mistake. Fix this mistake by replacing 'req->sso' with 'req->ssow'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 746ea742 ("octeontx2-af: Add RVU block LF provisioning support") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by:
-
Jakub Kicinski authored
bnxt doesn't check if a ring is used by RSS contexts when reducing ring count. Core performs a similar check for the drivers for the main context, but core doesn't know about additional contexts, so it can't validate them. bnxt_fill_hw_rss_tbl_p5() uses ring id to index bp->rx_ring[], which without the check may end up being out of bounds. BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620 Core does track the additional contexts in net-next, so we can move this validation out of the driver as a follow up there. Fixes: b3d0083c ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()") Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://patch.msgid.link/20240705020005.681746-1-kuba@kernel.orgSigned-off-by:
-
Geliang Tang authored
When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by:John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
-
Oleksij Rempel authored
Reinit PHY after cable test, otherwise link can't be established on tested port. This issue is reproducible on LAN9372 switches with integrated 100BaseT1 PHYs. Fixes: 78805025 ("net: phy: microchip_t1: add cable test support for lan87xx phy") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240705084954.83048-1-o.rempel@pengutronix.deSigned-off-by:
-
- 08 Jul, 2024 3 commits
-
-
Daniel Borkmann authored
Add a test case which replaces an active ingress qdisc while keeping the miniq in-tact during the transition period to the new clsact qdisc. # ./vmtest.sh -- ./test_progs -t tc_link [...] ./test_progs -t tc_link [ 3.412871] bpf_testmod: loading out-of-tree module taints kernel. [ 3.413343] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #332 tc_links_after:OK #333 tc_links_append:OK #334 tc_links_basic:OK #335 tc_links_before:OK #336 tc_links_chain_classic:OK #337 tc_links_chain_mixed:OK #338 tc_links_dev_chain0:OK #339 tc_links_dev_cleanup:OK #340 tc_links_dev_mixed:OK #341 tc_links_ingress:OK #342 tc_links_invalid:OK #343 tc_links_prepend:OK #344 tc_links_replace:OK #345 tc_links_revision:OK Summary: 14/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
Daniel Borkmann authored
Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time. Fixes: e420bed0 ("bpf: Add fd-based tcx multi-prog infra with link support") Reported-by:Pedro Pinto <xten@osec.io> Co-developed-by:
-
Chris Packham authored
Correct the example to match the help text from the devlink utility. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 06 Jul, 2024 7 commits
-
-
Neal Cardwell authored
Loss recovery undo_retrans bookkeeping had a long-standing bug where a DSACK from a spurious TLP retransmit packet could cause an erroneous undo of a fast recovery or RTO recovery that repaired a single really-lost packet (in a sequence range outside that of the TLP retransmit). Basically, because the loss recovery state machine didn't account for the fact that it sent a TLP retransmit, the DSACK for the TLP retransmit could erroneously be implicitly be interpreted as corresponding to the normal fast recovery or RTO recovery retransmit that plugged a real hole, thus resulting in an improper undo. For example, consider the following buggy scenario where there is a real packet loss but the congestion control response is improperly undone because of this bug: + send packets P1, P2, P3, P4 + P1 is really lost + send TLP retransmit of P4 + receive SACK for original P2, P3, P4 + enter fast recovery, fast-retransmit P1, increment undo_retrans to 1 + receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!) + receive cumulative ACK for P1-P4 (fast retransmit plugged real hole) The fix: when we initialize undo machinery in tcp_init_undo(), if there is a TLP retransmit in flight, then increment tp->undo_retrans so that we make sure that we receive a DSACK corresponding to the TLP retransmit, as well as DSACKs for all later normal retransmits, before triggering a loss recovery undo. Note that we also have to move the line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO we remember the tp->tlp_high_seq value until tcp_init_undo() and clear it only afterward. Also note that the bug dates back to the original 2013 TLP implementation, commit 6ba8a3b1 ("tcp: Tail loss probe (TLP)"). However, this patch will only compile and work correctly with kernels that have tp->tlp_retrans, which was added only in v5.8 in 2020 in commit 76be93fc ("tcp: allow at most one TLP probe per flight"). So we associate this fix with that later commit. Fixes: 76be93fc ("tcp: allow at most one TLP probe per flight") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
-
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard fixes for 6.10-rc7 These are four small fixes for WireGuard, which are all marked for stable: 1) A QEMU command line fix to remove deprecated flags. 2) Use of proper unaligned helpers to avoid unaligned memory access on some systems, from Helge. 3) Two patches to annotate intentional data races, so KCSAN and syzbot don't get upset. ==================== Link: https://patch.msgid.link/20240704154517.1572127-1-Jason@zx2c4.comSigned-off-by:
-
Jason A. Donenfeld authored
KCSAN reports a race in wg_packet_send_keepalive, which is intentional: BUG: KCSAN: data-race in wg_packet_send_keepalive / wg_packet_send_staged_packets write to 0xffff88814cd91280 of 8 bytes by task 3194 on cpu 0: __skb_queue_head_init include/linux/skbuff.h:2162 [inline] skb_queue_splice_init include/linux/skbuff.h:2248 [inline] wg_packet_send_staged_packets+0xe5/0xad0 drivers/net/wireguard/send.c:351 wg_xmit+0x5b8/0x660 drivers/net/wireguard/device.c:218 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3564 __dev_queue_xmit+0xeff/0x1d80 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x231/0x2a0 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0xa66/0xce0 net/ipv6/ip6_output.c:137 ip6_finish_output+0x1a5/0x490 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ndisc_send_skb+0x4a2/0x670 net/ipv6/ndisc.c:509 ndisc_send_rs+0x3ab/0x3e0 net/ipv6/ndisc.c:719 addrconf_dad_completed+0x640/0x8e0 net/ipv6/addrconf.c:4295 addrconf_dad_work+0x891/0xbc0 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 read to 0xffff88814cd91280 of 8 bytes by task 3202 on cpu 1: skb_queue_empty include/linux/skbuff.h:1798 [inline] wg_packet_send_keepalive+0x20/0x100 drivers/net/wireguard/send.c:225 wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline] wg_packet_handshake_receive_worker+0x445/0x5e0 drivers/net/wireguard/receive.c:213 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 kthread+0x1d7/0x210 kernel/kthread.c:388 ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 value changed: 0xffff888148fef200 -> 0xffff88814cd91280 Mark this race as intentional by using the skb_queue_empty_lockless() function rather than skb_queue_empty(), which uses READ_ONCE() internally to annotate the race. Cc: stable@vger.kernel.org Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20240704154517.1572127-5-Jason@zx2c4.comSigned-off-by:
-
Jason A. Donenfeld authored
KCSAN reports a race in the CPU round robin function, which, as the comment points out, is intentional: BUG: KCSAN: data-race in wg_packet_send_staged_packets / wg_packet_send_staged_packets read to 0xffff88811254eb28 of 4 bytes by task 3160 on cpu 1: wg_cpumask_next_online drivers/net/wireguard/queueing.h:127 [inline] wg_queue_enqueue_per_device_and_peer drivers/net/wireguard/queueing.h:173 [inline] wg_packet_create_data drivers/net/wireguard/send.c:320 [inline] wg_packet_send_staged_packets+0x60e/0xac0 drivers/net/wireguard/send.c:388 wg_packet_send_keepalive+0xe2/0x100 drivers/net/wireguard/send.c:239 wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline] wg_packet_handshake_receive_worker+0x449/0x5f0 drivers/net/wireguard/receive.c:213 process_one_work kernel/workqueue.c:3248 [inline] process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3329 worker_thread+0x526/0x720 kernel/workqueue.c:3409 kthread+0x1d1/0x210 kernel/kthread.c:389 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 write to 0xffff88811254eb28 of 4 bytes by task 3158 on cpu 0: wg_cpumask_next_online drivers/net/wireguard/queueing.h:130 [inline] wg_queue_enqueue_per_device_and_peer drivers/net/wireguard/queueing.h:173 [inline] wg_packet_create_data drivers/net/wireguard/send.c:320 [inline] wg_packet_send_staged_packets+0x6e5/0xac0 drivers/net/wireguard/send.c:388 wg_packet_send_keepalive+0xe2/0x100 drivers/net/wireguard/send.c:239 wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline] wg_packet_handshake_receive_worker+0x449/0x5f0 drivers/net/wireguard/receive.c:213 process_one_work kernel/workqueue.c:3248 [inline] process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3329 worker_thread+0x526/0x720 kernel/workqueue.c:3409 kthread+0x1d1/0x210 kernel/kthread.c:389 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 value changed: 0xffffffff -> 0x00000000 Mark this race as intentional by using READ/WRITE_ONCE(). Cc: stable@vger.kernel.org Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by: -
Helge Deller authored
On the parisc platform, the kernel issues kernel warnings because swap_endian() tries to load a 128-bit IPv6 address from an unaligned memory location: Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df) Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc) Avoid such unaligned memory accesses by instead using the get_unaligned_be64() helper macro. Signed-off-by:
Helge Deller <deller@gmx.de> [Jason: replace src[8] in original patch with src+8] Cc: stable@vger.kernel.org Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:
-
Jason A. Donenfeld authored
QEMU 9.0 removed -no-acpi, in favor of machine properties, so update the Makefile to use the correct QEMU invocation. Cc: stable@vger.kernel.org Fixes: b83fdcd9 ("wireguard: selftests: use microvm on x86") Signed-off-by:
-
Dan Carpenter authored
Return an error code if bcmasp_interface_create() fails. Don't return success. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Justin Chen <justin.chen@broadcom.com> Link: https://patch.msgid.link/ZoWKBkHH9D1fqV4r@stanley.mountainSigned-off-by:
-
- 05 Jul, 2024 1 commit
-
-
Christian Eggers authored
The 'phy' parameter supplied to lan9303_phy_read/_write was sometimes a DSA port number and sometimes a PHY address. This isn't a problem as long as they are equal. But if the external phy_addr_sel_strap pin is wired to 'high', the PHY addresses change from 0-1-2 to 1-2-3 (CPU, slave0, slave1). In this case, lan9303_phy_read/_write must translate between DSA port numbers and the corresponding PHY address. Fixes: a1292595 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by:
Christian Eggers <ceggers@arri.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240703145718.19951-1-ceggers@arri.deSigned-off-by:
-
- 04 Jul, 2024 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, wireless and netfilter. There's one fix for power management with Intel's e1000e here, Thorsten tells us there's another problem that started in v6.9. We're trying to wrap that up but I don't think it's blocking. Current release - new code bugs: - wifi: mac80211: disable softirqs for queued frame handling - af_unix: fix uninit-value in __unix_walk_scc(), with the new garbage collection algo Previous releases - regressions: - Bluetooth: - qca: fix BT enable failure for QCA6390 after warm reboot - add quirk to ignore reserved PHY bits in LE Extended Adv Report, abused by some Broadcom controllers found on Apple machines - wifi: wilc1000: fix ies_len type in connect path Previous releases - always broken: - tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(), avoid premature timeouts - net: make sure skb_datagram_iter maps fragments page by page, in case we somehow get compound highmem mixed in - eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more queues are used Misc: - MAINTAINERS: Remembering Larry Finger" * tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) bnxt_en: Fix the resource check condition for RSS contexts mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file inet_diag: Initialize pad field in struct inet_diag_req_v2 tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO. selftests: make order checking verbose in msg_zerocopy selftest selftests: fix OOM in msg_zerocopy selftest ice: use proper macro for testing bit ice: Reject pin requests with unsupported flags ice: Don't process extts if PTP is disabled ice: Fix improper extts handling selftest: af_unix: Add test case for backtrack after finalising SCC. af_unix: Fix uninit-value in __unix_walk_scc() bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() net: rswitch: Avoid use-after-free in rswitch_poll() netfilter: nf_tables: unconditionally flush pending work before notifier wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference wifi: iwlwifi: mvm: avoid link lookup in statistics wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK wifi: wilc1000: fix ies_len type in connect path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Fix and add physical to virtual address translations in dasd and virtio_ccw drivers. For virtio_ccw this is just a minimal fix. More code cleanup will follow. - Small defconfig updates * tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer s390/vfio_ccw: Fix target addresses of TIC CCWs s390: Update defconfigs
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Hans de Goede: - Fix regression in toshiba_acpi introduced in 6.10-rc1 * tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: toshiba_acpi: Fix quickstart quirk handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linuxLinus Torvalds authored
Pull Kselftest fix from Mickaël Salaün: "Fix Kselftests timeout. We can't use CLONE_VFORK, since that blocks the parent - and thus the timeout handling - until the child exits or execve's. Go back to using plain fork()" * tag 'kselftest-fix-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/harness: Fix tests timeout and race condition
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from, Andrew Morton: "6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues and three unrelated MM fixes" * tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: nilfs2: fix incorrect inode allocation from reserved inodes nilfs2: add missing check for inode numbers on directory entries nilfs2: fix inode number range checks mm: avoid overflows in dirty throttling logic Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" mm: optimize the redundant loop of mm_update_owner_next()
-
Pavan Chebbi authored
While creating a new RSS context, bnxt_rfs_capable() currently makes a strict check to see if the required VNICs are already available. If the current VNICs are not what is required, either too many or not enough, it will call the firmware to reserve the exact number required. There is a bug in the firmware when the driver tries to relinquish some reserved VNICs and RSS contexts. It will cause the default VNIC to lose its RSS configuration and cause receive packets to be placed incorrectly. Workaround this problem by skipping the resource reduction. The driver will not reduce the VNIC and RSS context reservations when a context is deleted. The resources will be available for use when new contexts are created later. Potentially, this workaround can cause us to run out of VNIC and RSS contexts if there are a lot of VF functions creating and deleting RSS contexts. In the future, we will conditionally disable this workaround when the firmware fix is available. Fixes: 438ba39b ("bnxt_en: Improve RSS context reservation infrastructure") Reported-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Aleksandr Mishin authored
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory but doesn't reset pointer to NULL and returns 0. In case of any error occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init() calls mlxsw_linecard_types_fini() which performs memory deallocation again. Add pointer reset to NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b217127e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.10 Hopefully the last fixes for v6.10. Fix a regression in wilc1000 where bitrate Information Elements longer than 255 bytes were broken. Few fixes also to mac80211 and iwlwifi. * tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference wifi: iwlwifi: mvm: avoid link lookup in statistics wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK wifi: wilc1000: fix ies_len type in connect path wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP ==================== Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains a oneliner patch to inconditionally flush workqueue containing stale objects to be released, syzbot managed to trigger UaF. Patch from Florian Westphal. netfilter pull request 24-07-04 * tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: unconditionally flush pending work before notifier ==================== Link: https://patch.msgid.link/20240703223304.1455-1-pablo@netfilter.orgSigned-off-by:
-
Shigeru Yoshida authored
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Fixes: 432490f9 ("net: ip, diag -- Add diag interface for raw sockets") Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
-
Kuniyuki Iwashima authored
When we process segments with TCP AO, we don't check it in tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1, which unconditionally triggers the BPF TCP option parser. Let's avoid the unnecessary BPF invocation. Fixes: 0a3a8090 ("net/tcp: Verify inbound TCP-AO signed segments") Signed-off-by:
Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20240703033508.6321-1-kuniyu@amazon.comSigned-off-by:
-
Jakub Kicinski authored
Zijian Zhang says: ==================== fix OOM and order check in msg_zerocopy selftest In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg on a socket with MSG_ZEROCOPY flag, and it will recv the notifications until the socket is not writable. Typically, it will start the receiving process after around 30+ sendmsgs. However, as the introduction of commit dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is always writable and does not get any chance to run recv notifications. The selftest always exits with OUT_OF_MEMORY because the memory used by opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a different value to trigger OOM on older kernels too. Thus, we introduce "cfg_notification_limit" to force sender to receive notifications after some number of sendmsgs. And, we find that when lock debugging is on, notifications may not come in order. Thus, we have order checking outputs managed by cfg_verbose, to avoid too many outputs in this case. ==================== Link: https://patch.msgid.link/20240701225349.3395580-1-zijianzhang@bytedance.comSigned-off-by:
-
Zijian Zhang authored
We find that when lock debugging is on, notifications may not come in order. Thus, we have order checking outputs managed by cfg_verbose, to avoid too many outputs in this case. Fixes: 07b65c5b ("test: add msg_zerocopy test") Signed-off-by:
Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by:
Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.comSigned-off-by:
-
Zijian Zhang authored
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg on a socket with MSG_ZEROCOPY flag, and it will recv the notifications until the socket is not writable. Typically, it will start the receiving process after around 30+ sendmsgs. However, as the introduction of commit dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is always writable and does not get any chance to run recv notifications. The selftest always exits with OUT_OF_MEMORY because the memory used by opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a different value to trigger OOM on older kernels too. Thus, we introduce "cfg_notification_limit" to force sender to receive notifications after some number of sendmsgs. Fixes: 07b65c5b ("test: add msg_zerocopy test") Signed-off-by:
-
Jakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-06-25 (ice) This series contains updates to ice driver only. Milena adds disabling of extts events when PTP is disabled. Jake prevents possible NULL pointer by checking that timestamps are ready before processing extts events and adds checks for unsupported PTP pin configuration. Petr Oros replaces _test_bit() with the correct test_bit() macro. v1: https://lore.kernel.org/netdev/20240625170248.199162-1-anthony.l.nguyen@intel.com/ ==================== Link: https://patch.msgid.link/20240702171459.2606611-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Petr Oros authored
Do not use _test_bit() macro for testing bit. The proper macro for this is one without underline. _test_bit() is what test_bit() was prior to const-optimization. It directly calls arch_test_bit(), i.e. the arch-specific implementation (or the generic one). It's strictly _internal_ and shouldn't be used anywhere outside the actual test_bit() macro. test_bit() is a wrapper which checks whether the bitmap and the bit number are compile-time constants and if so, it calls the optimized function which evaluates this call to a compile-time constant as well. If either of them is not a compile-time constant, it just calls _test_bit(). test_bit() is the actual function to use anywhere in the kernel. IOW, calling _test_bit() avoids potential compile-time optimizations. The sensors is not a compile-time constant, thus most probably there are no object code changes before and after the patch. But anyway, we shouldn't call internal wrappers instead of the actual API. Fixes: 4da71a77 ("ice: read internal temperature sensor") Acked-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
