- 19 Jun, 2015 40 commits
-
-
Shachar Raindel authored
commit 8494057a upstream. Properly verify that the resulting page aligned end address is larger than both the start address and the length of the memory area requested. Both the start and length arguments for ib_umem_get are controlled by the user. A misbehaving user can provide values which will cause an integer overflow when calculating the page aligned end address. This overflow can cause also miscalculation of the number of pages mapped, and additional logic issues. Addresses: CVE-2014-8159 Signed-off-by:
Shachar Raindel <raindel@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Zefan Li <lizefan@huawei.com>
-
Johannes Berg authored
commit 788211d8 upstream. There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
Stefan Lippers-Hollmann authored
commit 80313b30 upstream. The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in both BIOS and UEFI mode while rebooting unless reboot=pci is used. Add a quirk to reboot via the pci method. The problem is very intermittent and hard to debug, it might succeed rebooting just fine 40 times in a row - but fails half a dozen times the next day. It seems to be slightly less common in BIOS CSM mode than native UEFI (with the CSM disabled), but it does happen in either mode. Since I've started testing this patch in late january, rebooting has been 100% reliable. Most of the time it already hangs during POST, but occasionally it might even make it through the bootloader and the kernel might even start booting, but then hangs before the mode switch. The same symptoms occur with grub-efi, gummiboot and grub-pc, just as well as (at least) kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16). Upgrading to the most current mainboard firmware of the ASRock Q1900DC-ITX, version 1.20, does not improve the situation. ( Searching the web seems to suggest that other Bay Trail-D mainboards might be affected as well. ) -- Signed-off-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mirSigned-off-by:
Ingo Molnar <mingo@kernel.org> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
David Miller authored
commit f2c9e560 upstream. Use readb() and memcpy_fromio() accessors instead. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Doug Goldstein authored
commit b229a0f8 upstream. This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by:
Doug Goldstein <cardoe@cardoe.com> [johan: clean up probe logic ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
WANG Cong authored
commit d079535d upstream. In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f ("netlink: support setting devgroup parameters") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Lu Baolu authored
commit 227a4fd8 upstream. When a device with an isochronous endpoint is plugged into the Intel xHCI host controller, and the driver submits multiple frames per URB, the xHCI driver will set the Block Event Interrupt (BEI) flag on all but the last TD for the URB. This causes the host controller to place an event on the event ring, but not send an interrupt. When the last TD for the URB completes, BEI is cleared, and we get an interrupt for the whole URB. However, under Intel xHCI host controllers, if the event ring is full of events from transfers with BEI set, an "Event Ring is Full" event will be posted to the last entry of the event ring, but no interrupt is generated. Host will cease all transfer and command executions and wait until software completes handling the pending events in the event ring. That means xHC stops, but event of "event ring is full" is not notified. As the result, the xHC looks like dead to user. This patch is to apply XHCI_AVOID_BEI quirk to Intel xHC devices. And it should be backported to kernels as old as 3.0, that contains the commit 69e848c2 ("Intel xhci: Support EHCI/xHCI port switching."). Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Tested-by:
Alistair Grant <akgrant0710@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
Lu Baolu authored
commit 9425183d upstream. Linux xHCI driver doesn't report and handle port cofig error change. If Port Configure Error for root hub port occurs, CEC bit in PORTSC would be set by xHC and remains 1. This happends when the root port fails to configure its link partner, e.g. the port fails to exchange port capabilities information using Port Capability LMPs. Then the Port Status Change Events will be blocked until all status change bits(CEC is one of the change bits) are cleared('0') (refer to xHCI spec 4.19.2). Otherwise, the port status change event for this root port will not be generated anymore, then root port would look like dead for user and can't be recovered until a Host Controller Reset(HCRST). This patch is to check CEC bit in PORTSC in xhci_get_port_status() and set a Config Error in the return status if CEC is set. This will cause a ClearPortFeature request, where CEC bit is cleared in xhci_clear_port_change_bit(). [The commit log is based on initial Marvell patch posted at http://marc.info/?l=linux-kernel&m=142323612321434&w=2] Reported-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
David Disseldorp authored
commit e1e9bda2 upstream. Under intermittent network outages, find_writable_file() is susceptible to the following race condition, which results in a user-after-free in the cifs_writepages code-path: Thread 1 Thread 2 ======== ======== inv_file = NULL refind = 0 spin_lock(&cifs_file_list_lock) // invalidHandle found on openFileList inv_file = open_file // inv_file->count currently 1 cifsFileInfo_get(inv_file) // inv_file->count = 2 spin_unlock(&cifs_file_list_lock); cifs_reopen_file() cifs_close() // fails (rc != 0) ->cifsFileInfo_put() spin_lock(&cifs_file_list_lock) // inv_file->count = 1 spin_unlock(&cifs_file_list_lock) spin_lock(&cifs_file_list_lock); list_move_tail(&inv_file->flist, &cifs_inode->openFileList); spin_unlock(&cifs_file_list_lock); cifsFileInfo_put(inv_file); ->spin_lock(&cifs_file_list_lock) // inv_file->count = 0 list_del(&cifs_file->flist); // cleanup!! kfree(cifs_file); spin_unlock(&cifs_file_list_lock); spin_lock(&cifs_file_list_lock); ++refind; // refind = 1 goto refind_writable; At this point we loop back through with an invalid inv_file pointer and a refind value of 1. On second pass, inv_file is not overwritten on openFileList traversal, and is subsequently dereferenced. Signed-off-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Doug Goldstein authored
commit 4899c054 upstream. Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their SNAP Stick 200 product. Signed-off-by:
-
Hui Wang authored
commit af95b414 upstream. We have a HP machine which use the codec node 0x17 connecting the internal speaker, and from the node capability, we saw the EAPD, if we don't set the EAPD on for this node, the internal speaker can't output any sound. BugLink: https://bugs.launchpad.net/bugs/1436745Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sergei Antonov authored
commit 98cf21c6 upstream. Fix B-tree corruption when a new record is inserted at position 0 in the node in hfs_brec_insert(). In this case a hfs_brec_update_parent() is called to update the parent index node (if exists) and it is passed hfs_find_data with a search_key containing a newly inserted key instead of the key to be updated. This results in an inconsistent index node. The bug reproduces on my machine after an extents overflow record for the catalog file (CNID=4) is inserted into the extents overflow B-tree. Because of a low (reserved) value of CNID=4, it has to become the first record in the first leaf node. The resulting first leaf node is correct: ---------------------------------------------------- | key0.CNID=4 | key1.CNID=123 | key2.CNID=456, ... | ---------------------------------------------------- But the parent index key0 still contains the previous key CNID=123: ----------------------- | key0.CNID=123 | ... | ----------------------- A change in hfs_brec_insert() makes hfs_brec_update_parent() work correctly by preventing it from getting fd->record=-1 value from __hfs_brec_find(). Along the way, I removed duplicate code with unification of the if condition. The resulting code is equivalent to the original code because node is never 0. Also hfs_brec_update_parent() will now return an error after getting a negative fd->record value. However, the return value of hfs_brec_update_parent() is not checked anywhere in the file and I'm leaving it unchanged by this patch. brec.c lacks error checking after some other calls too, but this issue is of less importance than the one being fixed by this patch. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Cc: Joe Perches <joe@perches.com> Reviewed-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Anton Altaparmakov <aia21@cam.ac.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
Joe Perches authored
commit 6436a123 upstream. Return a negative error value like the rest of the entries in this function. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> [PM: tweaked subject line] Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit c72efb65 upstream. From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 23 Mar 2015 00:08:19 -0400 2f800fbd ("writeback: fix dirtied pages accounting on redirty") introduced account_page_redirty() which reverts stat updates for a redirtied page, making BDI_DIRTIED no longer monotonically increasing. bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the basis for bandwidth calculation. While unlikely, since the above patch, the newer value may be lower than the recorded past value and underflow the bandwidth calculation leading to a wild result. Fix it by subtracing min of the old and new values when calculating delta. AFAIK, there hasn't been any report of it happening but the resulting erratic behavior would be non-critical and temporary, so it's possible that the issue is happening without being reported. The risk of the fix is very low, so tagged for -stable. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Fixes: 2f800fbd ("writeback: fix dirtied pages accounting on redirty") Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Brian Silverman authored
commit 746db944 upstream. When non-realtime tasks get priority-inheritance boosted to a realtime scheduling class, RLIMIT_RTTIME starts to apply to them. However, the counter used for checking this (the same one used for SCHED_RR timeslices) was not getting reset. This meant that tasks running with a non-realtime scheduling class which are repeatedly boosted to a realtime one, but never block while they are running realtime, eventually hit the timeout without ever running for a time over the limit. This patch resets the realtime timeslice counter when un-PI-boosting from an RT to a non-RT scheduling class. I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT mutex which induces priority boosting and spins while boosted that gets killed by a SIGXCPU on non-fixed kernels but doesn't with this patch applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and does happen eventually with PREEMPT_VOLUNTARY kernels. Signed-off-by:
Brian Silverman <brian@peloton-tech.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: austin@peloton-tech.com Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.comSigned-off-by:
-
Peter Zijlstra authored
commit d525211f upstream. Vince reported a watchdog lockup like: [<ffffffff8115e114>] perf_tp_event+0xc4/0x210 [<ffffffff810b4f8a>] perf_trace_lock+0x12a/0x160 [<ffffffff810b7f10>] lock_release+0x130/0x260 [<ffffffff816c7474>] _raw_spin_unlock_irqrestore+0x24/0x40 [<ffffffff8107bb4d>] do_send_sig_info+0x5d/0x80 [<ffffffff811f69df>] send_sigio_to_task+0x12f/0x1a0 [<ffffffff811f71ce>] send_sigio+0xae/0x100 [<ffffffff811f72b7>] kill_fasync+0x97/0xf0 [<ffffffff8115d0b4>] perf_event_wakeup+0xd4/0xf0 [<ffffffff8115d103>] perf_pending_event+0x33/0x60 [<ffffffff8114e3fc>] irq_work_run_list+0x4c/0x80 [<ffffffff8114e448>] irq_work_run+0x18/0x40 [<ffffffff810196af>] smp_trace_irq_work_interrupt+0x3f/0xc0 [<ffffffff816c99bd>] trace_irq_work_interrupt+0x6d/0x80 Which is caused by an irq_work generating new irq_work and therefore not allowing forward progress. This happens because processing the perf irq_work triggers another perf event (tracepoint stuff) which in turn generates an irq_work ad infinitum. Avoid this by raising the recursion counter in the irq_work -- which effectively disables all software events (including tracepoints) from actually triggering again. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
-
Markos Chandras authored
commit 87f966d9 upstream. On a MIPS Malta board, tons of fifo underflow errors have been observed when using u-boot as bootloader instead of YAMON. The reason for that is that YAMON used to set the pcnet device to SRAM mode but u-boot does not. As a result, the default Tx threshold (64 bytes) is now too small to keep the fifo relatively used and it can result to Tx fifo underflow errors. As a result of which, it's best to setup the SRAM on supported controllers so we can always use the NOUFLO bit. Cc: <netdev@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Cc: Don Fry <pcnet32@frontier.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
-
Sudip Mukherjee authored
commit ff6b8090 upstream. we have already allocated memory for nbd_dev, but we were not releasing that memory and just returning the error value. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Acked-by:
Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Tejun Heo authored
commit 7d70e154 upstream. global_update_bandwidth() uses static variable update_time as the timestamp for the last update but forgets to initialize it to INITIALIZE_JIFFIES. This means that global_dirty_limit will be 5 mins into the future on 32bit and some large amount jiffies into the past on 64bit. This isn't critical as the only effect is that global_dirty_limit won't be updated for the first 5 mins after booting on 32bit machines, especially given the auxiliary nature of global_dirty_limit's role - protecting against global dirty threshold's sudden dips; however, it does lead to unintended suboptimal behavior. Fix it. Fixes: c42843f2 ("writeback: introduce smoothed global dirty limit") Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Nicholas Bellinger authored
commit 215a8fe4 upstream. This patch fixes a NULL pointer dereference OOPs with pSCSI backends within target_core_stat.c code. The bug is caused by a configfs attr read if no pscsi_dev_virt->pdv_sd has been configured. Reported-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Dan Carpenter authored
commit d556546e upstream. This patch adds a missing set of conditional check braces in ft_invl_hw_context() originally introduced by commit dcd998cc when handling DDP failures in ft_recv_write_data() code. commit dcd998cc Author: Kiran Patil <kiran.patil@intel.com> Date: Wed Aug 3 09:20:01 2011 +0000 tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by:
-
Majd Dibbiny authored
commit 61a3855b upstream. For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of overflow, according to the IB spec, we have to saturate a counter to its max value, do that. Fixes: c3779134 ('IB/mlx4: Support PMA counters for IBoE') Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
-
Johannes Berg authored
commit 496fcc29 upstream. As HT/VHT depend heavily on QoS/WMM, it's not a good idea to let userspace add clients that have HT/VHT but not QoS/WMM. Since it does so in certain cases we've observed (client is using HT IEs but not QoS/WMM) just ignore the HT/VHT info at this point and don't pass it down to the drivers which might unconditionally use it. Signed-off-by:
-
Stephan Mueller authored
commit ccfe8c3f upstream. The kernel crypto API logic requires the caller to provide the length of (ciphertext || authentication tag) as cryptlen for the AEAD decryption operation. Thus, the cipher implementation must calculate the size of the plaintext output itself and cannot simply use cryptlen. The RFC4106 GCM decryption operation tries to overwrite cryptlen memory in req->dst. As the destination buffer for decryption only needs to hold the plaintext memory but cryptlen references the input buffer holding (ciphertext || authentication tag), the assumption of the destination buffer length in RFC4106 GCM operation leads to a too large size. This patch simply uses the already calculated plaintext size. In addition, this patch fixes the offset calculation of the AAD buffer pointer: as mentioned before, cryptlen already includes the size of the tag. Thus, the tag does not need to be added. With the addition, the AAD will be written beyond the already allocated buffer. Note, this fixes a kernel crash that can be triggered from user space via AF_ALG(aead) -- simply use the libkcapi test application from [1] and update it to use rfc4106-gcm-aes. Using [1], the changes were tested using CAVS vectors to demonstrate that the crypto operation still delivers the right results. [1] http://www.chronox.de/libkcapi.html CC: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Takashi Iwai authored
commit b4a18c8b upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 07892b10 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit eaddf6fd upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 24cc883c upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit bd14016f upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 00a14c29 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit e8371aa0 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by:
-
Takashi Iwai authored
commit 08641d9b upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 2bf4c1d4 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Andy Lutomirski authored
commit 394838c9 upstream. The one in do_debug() is probably harmless, but better safe than sorry. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d67deaa9df5458363623001f252d1aee3215d014.1425948056.git.luto@amacapital.netSigned-off-by:
-
Malcolm Priestley authored
commit 40c8790b upstream. When the driver sets this rate a power of zero value is set causing data flow stoppage until another rate is tried. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
commit ebc80840 upstream. The Fimware 8.1 has a bug in which the extra buttons are only sent when the ExtBit is 1. This should be fixed in a future FW update which should have a bump of the minor version. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit dc5465dc upstream. On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle button of the trackstick (attached to the touchpad serio device, of course) seems to get lost. Actually, the touchpads reports 3 extra buttons, which falls in the switch below to the '2' case. Let's handle the case of odd numbers also, so that the middle button finds its way back. Signed-off-by:
-
Daniel Martin authored
commit ac097930 upstream. Query the min dimensions even if the check SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the firmware version 8.1 is safe. With that we don't need quirks for post-2013 models anymore as they expose correct min and max dimensions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541Signed-off-by:
Daniel Martin <consume.noise@gmail.com> re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1 Signed-off-by:
-
Eric Nelson authored
commit c7d910b8 upstream. The SGTL5000_CHIP_ANA_POWER register is cached. Update the cached value instead of writing it directly. Patch inspired by Russell King's more colorful remarks in this patch: https://github.com/SolidRun/linux-imx6-3.14/commit/dd4bf6aSigned-off-by:
Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by:
-
Jiri Slaby authored
commit e8932869 upstream. On gcc5 the kernel does not link: ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670. Because prior GCC versions always emitted NOPs on ALIGN directives, but gcc5 started omitting them. .LSTARTFDEDLSI1 says: /* HACK: The dwarf2 unwind routines will subtract 1 from the return address to get an address in the middle of the presumed call instruction. Since we didn't get here via a call, we need to include the nop before the real start to make up for it. */ .long .LSTART_sigreturn-1-. /* PC-relative start address */ But commit 69d0627a ("x86 vDSO: reorder vdso32 code") from 2.6.25 replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before __kernel_sigreturn. Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN". So fix this by adding to that point at least a single NOP and make the function ALIGN possibly with more NOPs then. Kudos for reporting and diagnosing should go to Richard. Reported-by:
Richard Biener <rguenther@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
-
