Merge tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.16

* r8a7745 (RZ/G1E) SoC
  - Enable SMP

    Fabrizio Castro says "Add DT node for the Advanced Power Management
    Unit (APMU), add the second CPU core, and use "renesas,apmu" as
    "enable-method"."

* r8a7743 (RZ/G1M) SoC
  - Add node for thermal sensor module with thermal-zone support

* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
  - Add:
    + Renesas Core Match Timer (CMT) support
    + Renesas Timer Pulse Unit PWM Controller (TPU) support
    + Renesas PWM Timer Controller (PWM) support

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
  r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
  - Add sound support

* r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
  - Allow DTBs of boards of these SoCs to build without any warnings when
    compiled with W=1 using gcc-linaro-5.4.1-2017.05
    + Move nodes which have no reg property out of bus, they don't belong there
    + Also sort sub-nodes of root node to allow for easier maintenance

* r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
  - Correct critical CPU temperature

    Chris Paterson says "The current R-Car Gen2 device trees define the CPU
    critical temperature as 115°C.

    The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
    sensor has an accuracy of ±5°C and there can be a temperature
    difference of 1 or 2 degrees between Tjmax and the thermal sensor due
    to the location of the latter.

    This means that 95°C is a safer value to use.

    This value should also apply to r8a7792 but thermal sensor support has
    not been added yet."

* r8a7740 (R-Mobile A1) SoC
  - Correct TPU register block size

    Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
    outside the declared register block.  Enlarge the register block size to
    fix this.

    This was probably based on the old platform code, which also assumed a
    register block size of 0x100."

* tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (37 commits)
  ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
  ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
  ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
  ARM: dts: iwg22d-sodimm: Sound PIO support
  ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
  ARM: dts: r8a7745: Add sound support
  ARM: dts: r8a7745: Add audio DMAC support
  ARM: dts: r8a7745: Add audio clocks
  ARM: dts: r8a7740: Correct TPU register block size
  ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus
  ARM: dts: r8a7743: sort root sub-nodes alphabetically
  ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
  ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
  ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
  ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
  ARM: dts: iwg20d-q7-common: Sound PIO support
  ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  ARM: dts: r8a7792: move timer node out of bus
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.16

* Add usb3_phy node to r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W) SoCs, and
  enable usb3_peri0 on salvator boards

* Allow DTBs of boards of r8a7795 (R-Car H3) and r8a7796 SoCs to build
  without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05
  - Move nodes which have no reg property out of bus, they don't belong there
  - Add reg properties to dummy pciec[01] nodes
  - Also sort sub-nodes of root node to allow for easier maintenance

* Add Add EthernetAVB PHY reset to r8a7795 (R-Car H3) and r8a7796 SoCs boards.

  Geert Uytterhoeven says "... add properties to describe the EthernetAVB
  PHY reset topology to the common Salvator-X/XS and ULCB DTS files, which
  solves two issues:
    1. On Salvator-XS, the enable pin of the regulator providing PHY power
       is connected to PRESETn, and PSCI powers down the SoC during system
       suspend.  Hence a PHY reset is needed to restore network
       functionality after system resume.
    2. Linux should not rely on the boot loader having reset the PHY, but
       should reset the PHY during driver probe."

* tag 'renesas-arm64-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: salvator-common: enable usb3_peri0
  arm64: dts: renesas: salvator-common: enable usb3_phy0 node
  arm64: dts: renesas: r8a7796: add usb3_phy node
  arm64: dts: renesas: r8a7795: add usb3_phy node
  arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
  arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
  arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
  arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset
  arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset
  arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt

Actions Semi arm64 based SoC DT for v4.16

This adds S700 SoC and CubieBoard7.

* tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm64: dts: actions: Add S700 and CubieBoard7
  dt-bindings: power: Add Actions Semi S700 SPS
  dt-bindings: arm: actions: Add S700 and CubieBoard7
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt

Actions Semi arm based SoC DT for v4.16

This adds a DT for the Allo.com Sparky SBC.

* tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm: dts: owl-s500: Add Sparky
  dt-bindings: arm: actions: Add Sparky
  dt-bindings: Add vendor prefix for Allo.com
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoC DT updates for 4.16

- Add SD card support for the hi3798cv200-poplar board
- Replace the PMU node with exact match for the hi3660 SoC
- Add cpu capacity-dmips-mhz information for the hi3660 SoC

* tag 'hisi-arm64-dt-for-4.16-v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: Add hi3660 cpu capacity-dmips-mhz information
  arm64: dts: hi3660: improve pmu description
  arm64: dts: hi3798cv200: add SD card support
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.16, please pull the following:

- Stefan updates the BCM283x DTS to make consistent use of the existing GPIO
  defines for the polarity specifier

* tag 'arm-soc/for-4.16/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Use GPIO polarity defines consistently
Signed-off-by: Olof Johansson <olof@lixom.net>

The added header inclusion broke the 'allmodconfig' build in
arm-soc, presumably since the file is added in a different tree:

In file included from arch/arm64/boot/dts/sprd/sp9860g-1h10.dts:11:0:
arch/arm64/boot/dts/sprd/sc9860.dtsi:10:10: fatal error: dt-bindings/clock/sprd,sc9860-clk.h: No such file or directory

It turns out we don't actually need to include it at all, so
I'm removing the line again to fix the build.

Fixes: 22f37a24 ("arm64: dts: add clocks for SC9860")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'gemini-dts-update-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Pull "A second set of Gemini DTS updates for v4.16" from Linus Walleij:

- Use Open Drain flags properly for emulated I2C

- Add the PCI bus to WBD111 and WBD222

- Enable the TVE and panel on DIR-685; the panel driver and
  bindings have been merged into the DRI subsystem.

* tag 'gemini-dts-update-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685
  ARM: dts: Add PCI to WBD111 and WBD222
  ARM: dts: Flags D-Link DIR-685 I2C bus gpios

Some clocks on SC9860 are in the same address area with syscon devices,
those are what have a property of 'sprd,syscon' which would refer to
syscon devices, others would have a reg property indicated their address
ranges.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Some clocks on SC9860 are in the same address area with syscon
devices, the proper syscon node will be quoted under the
definitions of those clocks in DT.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a Device Tree for the Allo.com Sparky SBC.
Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net>
[AF: Adjusted SPDX-License-Identifier style]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add Device Trees for S700 SoC and Cubietech CubieBoard7.
Signed-off-by: Andreas Färber <afaerber@suse.de>

The following dt entries are added:
 cpus [0-3] (Cortex A53):
   - capacity-dmips-mhz = <592>;

 cpus [4-7] (Cortex A73):
   - capacity-dmips-mhz = <1024>;

Those values were obtained by running dhrystone 2.1 on a
HiKey960 with the following procedure:
- Offline all CPUs but CPU0 (A53)
- Set CPU0 frequency to maximum
- Run Dhrystone 2.1 for 20 seconds

- Offline all CPUs but CPU4 (A73)
- set CPU4 frequency to maximum
- Run Dhrystone 2.1 for 20 seconds

The results are as follows:
A53: 129633887 loops
A73: 287034147 loops

By scaling those values so that the A73s use 1024, we end up with 462
for the A53s. However, they have different maximum frequencies:
1.844GHz for A53s and 2.362GHz for A73s. Thus, we can scale the A53
value to truly represent dmips per MHz, and we end up with 592.

The impact of this change can be verified on HiKey960:

$ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq
1844000
1844000
1844000
1844000
2362000
2362000
2362000
2362000

$ cat /sys/devices/system/cpu/cpu*/cpu_capacity
462
462
462
462
1024
1024
1024
1024
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

cortex-a73 pmu driver is supported now. hi3660 is 4*a73 + 4*a53, so it
should use "cortex-a73-pmu" and "cortex-a53-pmu" instead of "armpmu-v3",
then we can use the a73 and a53 events in perf tool directly.
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel
to the DIR-685 device tree.

This brings graphics to this funky router and it is possible to
even run a console on its tiny screen.

Incidentally this requires us to disable the access to the
parallel (NOR) flash, as the communication pins to the panel
are shared with the flash memory.

To access the flash, a separate kernel with the panel disabled
and the flash enabled should be booted. The pin control selecting
whether to use the lines cannot be altered at runtime due to
hardware constraints.

Cc: David Lechner <david@lechnology.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

These two boards have mini-PCI card slots, so enable PCI
on both of them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

These GPIOs are used in open drain mode, so make sure to
flag them as such. Use the new separate scl/sda line
GPIO bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the missing clock to CA7 CPU1 node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts64 changes for 4.16" from Heiko Stübner:

General RK3399 gets Mipi nodes, fixes for usb3 support and better support
for the type-c phys. The Kevin Chromebooks based on rk3399 now can use their
internal edp displays. RK3328 gets its efuse node and Mali450 gpu node,
which actually produces already some nice results with the WIP Lima driver.

* tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add efuse device node for RK3328 SoC
  arm64: dts: rockchip: add rk3328 mali gpu node
  dt-bindings: gpu: mali-utgard: add rockchip,rk3328-mali compatible
  arm64: dts: rockchip: add extcon nodes and enable tcphy rk3399-gru
  arm64: dts: rockchip: add usb3-phy otg-port support for rk3399
  arm64: dts: rockchip: add reset property for dwc3 controllers on rk3399
  arm64: dts: rockchip: add the aclk_usb3 clocks for USB3 on rk3399
  arm64: dts: rockchip: add pd_usb3 power-domain node for rk3399
  arm64: dts: rockchip: Enable edp disaplay on kevin
  arm64: dts: rockchip: update mipi cells for RK3399
  arm64: dts: rockchip: add mipi_dsi1 support for rk3399
  arm64: dts: rockchip: add rk3399 DSI0 reset

Merge tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.16" from Heiko Stübner:

Just the reset property for the rk3066a-rayeager emac phy

* tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add reset property for rk3066a-rayeager emac phy

Merge tag 'v4.15-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

Pull "arm64: Updates of aarch64 DTS for v4.15-next" from Matthias Brugger

- mt8173 add cpufreq related nodes
  supply nodes
  frequency/voltage operation table

- mt2712 add cpufreq related nodes
  fixed regulator
  supply nodes
  frequency/voltage operation table
- mt2712 add clock contoller nodes
- mt2712 add scpsys node

* tag 'v4.15-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: Add power controller device node of MT2712
  arm64: dts: mediatek: add mt2712 cpufreq related device nodes
  arm64: dts: mt2712: Add clock controller device nodes
  arm64: dts: mediatek: add mt8173 cpufreq related device nodes
  dt-bindings: soc: add MT2712 power dt-bindings

Merge tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger:

- add reset cells mt2701 and mt7623 ethsys
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case

* tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: ARM: Mediatek: Fix ethsys documentation
  arm: mt7: dts: Remove leading 0x and 0s from bindings notation
  arm: dts: mt7623: fix card detection issue on bananapi-r2
  arm: dts: mt7623: update mmc related nodes with the appropriate fallback
  arm: dts: mt2701: Add reset-cells
  arm: dts: mt7623: Update ethsys binding

Merge tag 'tegra-for-4.16-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "arm64: tegra: Changes for v4.16-rc1" from Thierry Reding:

This set of patches enables a bunch of new features on Jetson TX2 that
were finally unblocked by the GPIO driver getting merged for v4.15.

* tag 'tegra-for-4.16-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Use sor1_out clock
  arm64: tegra: Fix SD write-protect polarity on Jetson TX2
  arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms
  arm64: tegra: Enable HDMI on Jetson TX2
  arm64: tegra: Mark I2C4 as DDC on P3310
  arm64: tegra: Add display nodes on Tegra186
  arm64: tegra: Add SMMU node for Tegra186
  arm64: tegra: Enable memory controller on P3310
  arm64: tegra: Add memory controller on Tegra186
  arm64: tegra: Add FUSE block on Tegra186
  arm64: tegra: Add MISC registers on Tegra186

Merge tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "ARM: tegra: Device tree changes for v4.16-rc1" from Thierry Reding:

These changes enable the video decoder engine found on Tegra20 SoCs.

* tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add video decoder on Tegra20
  ARM: tegra: Add device tree node to describe IRAM on Tegra20

Merge tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "dt-bindings: Updates for v4.16-rc1" from Thierry Reding:

This contains a set of patches that extend existing bindings with support
for Tegra186.

* tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: memory: Add Tegra186 support
  dt-bindings: misc: Add Tegra186 MISC registers bindings

Merge tag 'samsung-dt64-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Samsung DTS ARM64 changes for v4.16" from Krzysztof Kozłowski:

1. Add CPU perf counters to Exynos5433.
2. Add missing power domains to Exynos5433.
3. Add NFC chip to Exynos5433 TM2/TM2E.
4. Fix obscure bugs on I2C transfers to MHL chip on TM2/TM2E.

* tag 'samsung-dt64-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Increase bus frequency for MHL chip
  arm64: dts: exynos: Add remaining power domains to Exynos5433 SoC
  arm64: dts: exynos: Add AUD power domain to Exynos5433 SoC
  arm64: dts: exynos: Add MFC power domain to Exynos 5433 SoC
  arm64: dts: exynos: Add MSCL power domain to Exynos 5433 SoC
  arm64: dts: exynos: Add DISP power domain to Exynos 5433 SoC
  arm64: dts: exynos: Add GSCL power domain to Exynos 5433 SoC
  arm64: dts: exynos: Add support for S3FWRN5 NFC chip to TM2(e) boards
  arm64: dts: exynos: Add CPU performance counters to Exynos5433 boards

Merge tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Samsung DTS ARM changes for 4.16" from Krzysztof Kozłowski:

1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3).
2. Enable WiFi on Trats2.
3. Add CPU perf counters to Exynos54xx.
4. Add power domains to certain chipsets.
5. Add Exynos4412 ISP clock controller which finally solves freezes when
   accessing ISP clocks while having the ISP power domain turned off.
6. Add Pseudo and True RNG to Exynos5.
7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410.
8. Cleanup of some of DTC warnings

* tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Use lower case hex addresses in node unit addresses
  ARM: dts: exynos: Add nodes for True Random Number Generator
  ARM: dts: exynos: Add DT nodes for PRNG in Exynos5 SoCs
  ARM: dts: exynos: Add G3D power domain to Exynos5250
  ARM: dts: exynos: Add audio power domain to Exynos5250
  ARM: dts: exynos: Fix power domain node names for Exynos5250
  ARM: dts: exynos: Add missing interrupt-controller properties to Exynos5410 PMU
  ARM: dts: exynos: Add audio power domain support to Exynos542x SoCs
  ARM: dts: exynos: Fix property values of LDO15/17 for Odroid XU3/XU4
  ARM: dts: exynos: Add Exynos4412 ISP clock controller
  ARM: dts: exynos: Move G2D node to exynos5.dtsi
  ARM: dts: exynos: Add CPU perf counters to Exynos54xx boards
  ARM: dts: exynos: Remove duplicate definitions of SSS nodes for Exynos5
  ARM: dts: exynos: Add bcm4334 device node to Trats2
  ARM: dts: exynos: Correct Trats2 panel reset line
  ARM: dts: exynos: Add sound support for Odroid XU4
  ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card binding

Merge tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Gemini DTS updates, take one

* tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Add basic devicetree for D-Link DNS-313
  ARM: dts: Add ethernet PHYs to the a bunch of Geminis

Merge tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Dts related changes for omaps for v4.16 merge window" from Tony
Lindgren:

These changes are mostly improvments for various devices.
Note that these are based on my earlier fixes branch
omap-for-v4.15/fixes-dt to avoid a pointless merge conflict
between a fix and removal. The summary of changes is:

- Fix audio codec reset pin for am335x-pepper and n900, this
  has been always broken and won't get fixed until the related
  driver changes are also merged in for v4.16, so not urgent

- Fix tps65917 powerhold property for dra76-evm

- Changes to logicpd boards to remove MTD partition information
  and to add support for omap35xx variants by setting up common
  dts files for the logicpd boards

- Disable dra7 USB metastability workaround, this won't do
  anything until the related driver changes are also merged
  into v4.16, so not urgent

* tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit
  ARM: dts: Add minimal support for LogicPD OMAP35xx Torpedo devkit
  ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard
  ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit
  ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi
  ARM: dts: dra7: Add missing hdmi audio DMA channel information
  ARM: dts: dra7: Disable USB metastability workaround for USB2
  ARM: dts: omap3: logicpd kits: Remove partition information
  ARM: dts: DRA76-EVM: Set powerhold property for tps65917
  ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
  ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin

Merge tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Clock related dts changes for omaps for v4.16 merge window" from
Tony Lindgren:

This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.

Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e6 ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.

* tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (57 commits)
  ARM: dts: dm816x: add clkctrl nodes
  ARM: dts: dm814x: add clkctrl nodes
  ARM: dts: am43xx: add clkctrl nodes
  ARM: dts: am33xx: add clkctrl nodes
  ARM: dts: dra7: add clkctrl nodes
  ARM: dts: omap5: add clkctrl nodes
  ARM: dts: omap4: add clkctrl nodes
  ARM: dts: dm816x: add bus functionality to base PRCM node
  ARM: dts: am43xx: add bus functionality to base PRCM node
  ARM: dts: am33xx: add bus functionality to base PRCM node
  ARM: dts: dra7: add bus functionality to base PRCM nodes
  ARM: dts: omap4: add bus functionality to base PRCM nodes
  ARM: dts: omap5: add bus functionality to base PRCM nodes
  ARM: dts: dm816x: add fck under timers1/2
  ARM: dts: dm814x: add fck under timers1/2
  ARM: dts: dra7: add fck under timer1
  ARM: dts: am43xx: add fck under timers1/2
  ARM: dts: am33xx: add fck under timers1/2
  ARM: dts: omap4: add fck under timer1
  ARM: dts: omap5: add fck under timer1
  ...

Merge tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Pull "Amlogic 64-bit DT updates for v4.16" from Kevin Hilman
- meson-gx: add VPU power domain support
- odroid-c2: add HDMI and CEC nodes
- misc cleanups

* tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxm: fix q200 interrupt number
  ARM64: dts: meson-gxm: add the PHY interrupt line on Khadas VIM2
  ARM64: dts: meson: add comments with the GPIO for the PHY interrupts
  ARM64: dts: amlogic: use generic bus node names
  ARM64: dts: meson: drop "sana" clock from SAR ADC
  ARM64: dts: odroid-c2: Add HDMI and CEC Nodes
  ARM64: dts: meson-gx: grow reset controller memory zone
  ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards
  ARM64: dts: meson-gx: add VPU power domain

Merge tag 'amlogic-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Pull "Amlogic 32-bit DT changes for v4.16" from Kevin Hilman:
- meson8: GPIO IRQ support
- switch to stable UART bindings w/correct clock
- add more L2 cache settings
- drop unused ADC clock

* tag 'amlogic-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: meson: enable MESON_IRQ_GPIO also for MACH_MESON8
  ARM: dts: meson8: enable the GPIO interrupt controller
  ARM: dts: meson8b: use stable UART bindings with correct gate clock
  ARM: dts: meson8: use stable UART bindings with correct gate clock
  ARM: dts: meson: drop "sana" clock from SAR ADC
  ARM: dts: meson8: add more L2 cache settings
  ARM: dts: meson8b: add more L2 cache settings

Merge tag 'renesas-arm64-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM64 Based SoC DT Updates for v4.16" from Simon Horman:

* Use r8a77970 (V3M) CPG core clock and SYSC power domain macros

  These may be used in place of numeric constants now that they
  are present in Linus's tree.

* Add r8a77970 (V3M) Starter Kit board support

  This includes basic support to bring up the board with a serial
  console and EtherAVB support

* Add IPMMU nodes and connections to on-chip devices
  on r8a7795 (H3), r8a7796 (M3-W), r8a77970 (V3M) and r8a77995 (D3) SoCs

  Simon Horman says "With these patches applied a white list enabled IPMMU
  driver may be used to check silicon revision and then enable IPMMU in the
  known working cases."

* Enable DMA for SCIF2 on r8a77995 (D2) SoC

* Increase the number of GPIO bank 1 ports to 29 on r8a7795 (H3) SoC

  This adds support for the GP-1-28 port pin of the r8a7795 (H3) ES2.0 SoC

* Add support for CAN to r8a77995 (D3) SoC

  Ulrich Hecht says "This is a by-the-datasheet implementation, with the
  datasheet missing some bits, namely the pin map.  I filled in the gaps...
  by deducing the information from pin numbers already in the PFC driver,
  so careful scrutiny is advised."

* Add support for SDHI to r8a77995 (D3) SoC

* Add SoC name to file header of r8a7795 (H3) and r8a7796 (M3-W)
  Salvator-X and Salvator-XS board files

  Geert Uytterhoeven says "With the proliferation of Salvator-X and
  Salvator-XS boards carrying different R-Car Gen3 SoCs variants, several
  DTS files ended up having the same file headers.

  Add the SoC names to the file headers to avoid confusion."

* Add device note for ROHM BD9571MWV PMIC to
  r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS boards.

  Geert Uytterhoeven says "This was based on the example in the DT binding
  documentation, but using IRQ0 instead of a GPIO interrupt, as that
  matches the schematics, and because INTC-EX is a simpler block."

* Enable USB2.0 channel 0 on r8a77970 (V3M) ULCB Kingfisher board

  Vladimir Barinov says "The dedicated USB0_PWEN pin is used to control
  CN13 VBUS source from U43 power supply.  MAX3355 can also provide VBUS,
  hence it should be disabled via OTG_OFFVBUSn node coming from gpio
  expander TCA9539.  Set MAX3355 enabled using OTG_EXTLPn node to be able
  to read OTG ID of CN13."

* Add support for r8a7795 (M3-W) Salvator-XS board

  Geert Uytterhoeven says "This patch series adds support for the version
  of the Salvator-XS development board equipped with an R-Car M3-W SiP.

  The DT was based on work for the Salvator-X and -XS boards with M3-W
  resp. H3 SiPs."

* Add watchdog timer support to r8a77970 (V3M) eagle board

  Geert Uytterhoven says "This allows to use the watchdog timer to reset
  the board, until PSCI is enhanced to include such functionality."

* Use Use R-Car SDHI Gen3 fallback on r8a7795 (H3) and r8a7796 (M3-W) SoCs

* Set driver type for MMC on r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and
  Salvator-XS boards.

  Wolfram Sang says "These boards are known to have eMMC issues with the
  default driver type.  Specify a working one."

* tag 'renesas-arm64-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (54 commits)
  arm64: dts: renesas: r8a77970: use SYSC power domain macros
  arm64: dts: renesas: r8a77970: use CPG core clock macros
  arm64: dts: renesas: v3msk: add EtherAVB support
  arm64: dts: renesas: initial V3MSK board device tree
  arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT
  arm64: dts: renesas: r8a77995: Add IPMMU device nodes
  arm64: dts: renesas: r8a77970: Enable IPMMU-DS1, RT and MM
  arm64: dts: renesas: r8a77970: Connect Ethernet-AVB to IPMMU-RT
  arm64: dts: renesas: r8a77970: Tie SYS-DMAC to IPMMU-DS1
  arm64: dts: renesas: r8a77970: Add IPMMU device nodes
  arm64: dts: renesas: r8a77995: add DMA for SCIF2
  arm64: dts: renesas: r8a77970: sort includes
  arm64: dts: renesas: r8a7795: Increase the number of GPIO bank 1 ports to 29
  arm64: dts: renesas: r8a77995: Add CAN FD support
  arm64: dts: renesas: r8a77995: Add CAN support
  arm64: dts: renesas: r8a77995: Add CAN external clock support
  arm64: dts: renesas: r8a7795-salvator-xs: Add SoC name to file header
  arm64: dts: renesas: r8a7796-salvator-x: Add SoC name to file header
  arm64: dts: renesas: r8a7795-salvator-x: Add SoC name to file header
  arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header
  ...

Merge tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v4.16" from Simon Horman:

* Convert to named i2c-gpio bindings

  Geert Uytterhoeven says "Commits 7d29f509 ("dt-bindings: i2c:
  i2c-gpio: Add support for named gpios") and 05c74778 ("i2c: gpio:
  Add support for named gpios in DT") introduced named i2c-gpio DT
  bindings, and deprecated the more error-prone unnamed variant.

  This patch series switches all Renesas boards to the new bindings, and
  adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly
  assumed before..."

  ...  Note that after this series is applied, the i2c-gpio buses are no
  longer detected when booting new DTBs on old (v4.14 and older) kernels,
  which should not be an issue.  Booting old DTBs on new kernels is not
  affected."

* Update DTS for CMT DT binding rework

  Geert Uytterhoeven says "This patch series updates the CMT device nodes
  in the various Renesas DTS files sh_cmt clocksource driver for the recent
  DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..."

* Add SMP support to r8a7794 (R-Car E2) SoC

  Sergei Shtylyov says "Add the device tree node for the Advanced Power
  Management Unit (APMU).  Use the "enable-method" prop to  point out that
  the APMU should be used for the SMP support."

* Correct primary compatible value for eeprom
  on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards

  Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial
  interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx
  pattern.

  Hence change the primary compatible values to the appropriate variant of
  "renesas,r1ex24xxx", like is already done on Gose.""

* Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board
  r8a7791 (R-Car M2-W) koelsh board

* Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings

  Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback
  compat strings in the DT of Renesas ARM based SoCs.

* Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC

* Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development
  platform and add serial support.

  Fabrizio Castro says "... define a new DT architecture for the
  iW-RainboW-G22D SODIMM Development Platform to include the configuration
  with the HDMI daughter board and to define the serial interfaces."

* Add USB function support to
  r8a7745 (RZ/G1E) iW-RainboW-G22D development platform

* Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM

* Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs

* Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
  r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms

* tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (61 commits)
  ARM: dts: alt: Convert to named i2c-gpio bindings
  ARM: dts: koelsch: Convert to named i2c-gpio bindings
  ARM: dts: lager: Convert to named i2c-gpio bindings
  ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings
  ARM: dts: sh73a0: Remove CMT renesas,channels-mask
  ARM: dts: r8a7794: Remove CMT renesas,channels-mask
  ARM: dts: r8a7793: Remove CMT renesas,channels-mask
  ARM: dts: r8a7791: Remove CMT renesas,channels-mask
  ARM: dts: r8a7790: Remove CMT renesas,channels-mask
  ARM: dts: r8a7740: Remove CMT renesas,channels-mask
  ARM: dts: r8a73a4: Remove CMT renesas,channels-mask
  ARM: dts: r8a7794: Update CMT compat strings
  ARM: dts: r8a7793: Update CMT compat strings
  ARM: dts: r8a7791: Update CMT compat strings
  ARM: dts: r8a7790: Update CMT compat strings
  ARM: dts: r8a73a4: Update CMT compat string
  ARM: dts: r8a7794: Add SMP support
  ARM: dts: genmai: Correct primary compatible value for eeprom
  ARM: dts: koelsch: Correct primary compatible value for eeprom
  ARM: dts: r8a7745: add VIN dt support
  ...

Merge tag 'renesas-dt-bindings-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Bindings Updates for v4.16" from Simon Horman:

* Document V3MSK board bindings

  These are the bindings for the R-Car V3M Starter Kit

* Document M3-W-based Salvator-XS board bingigns

  Geert Uytterhoeven says "The Renesas Salvator-XS (Salvator-X 2nd version)
  development board can be equipped with either an R-Car H3 ES2.0 or M3-W
  ES1.x SiP, which are pin-compatible."

* tag 'renesas-dt-bindings-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: renesas: document V3MSK board bindings
  ARM: shmobile: Document Renesas M3-W-based Salvator-XS board DT bindings

Blink the LED on a kernel panic.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Guodong Xu <guodong.xu@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Blink the LED on a kernel panic.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Guodong Xu <guodong.xu@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Blink the LED on a kernel panic.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARCH_S3C24XX is a very exceptional platform that some DT files in
arch/arm/boot/dts/, but does not select USE_OF.

All the other platforms with DT files correctly select USE_OF
directly or indirectly (Most of them are either ARCH_MULTIPLATFORM
or ARM_SINGLE_ARMV7M).

With ARCH_S3C24XX fixed, "ifeq ($(CONFIG_OF),y)" in DT Makefile
can be deleted.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>