- 02 Feb, 2015 6 commits
-
-
Cody P Schafer authored
Helper for constructing static struct perf_pmu_events_attr s. Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cody P Schafer authored
(struct perf_pmu_events_attr) is defined in include/linux/perf_event.h, but the only "show" for it is in x86 and contains x86 specific stuff. Make a generic one for those of us who are just using the event_str. Signed-off-by:
-
Gavin Shan authored
As commit 50ba08f3 ("of/fdt: Don't clear initial_boot_params if fdt_check_header() fails") does, the device-tree pointer "initial_boot_params" is initialized by early_init_dt_verify(), which is called by early_init_devtree(). So we needn't explicitly initialize that again in early_init_devtree(). Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
We have code to do syscall tracing which is disabled at compile time by default. It's not been touched since the dawn of time (ie. v2.6.12). There are now better ways to do syscall tracing, ie. using the raw_syscall, or syscall tracepoints. For the specific case of tracing syscalls at boot on a system that doesn't get to userspace, you can boot with: trace_event=syscalls tp_printk=on Which will trace syscalls from boot, and echo all output to the console. Signed-off-by: -
Michael Ellerman authored
Currently when we back trace something that is in a syscall we see something like this: [c000000000000000] [c000000000000000] SyS_read+0x6c/0x110 [c000000000000000] [c000000000000000] syscall_exit+0x0/0x98 Although it's entirely correct, seeing syscall_exit at the bottom can be confusing - we were exiting from a syscall and then called SyS_read() ? If we instead change syscall_exit to be a local label we get something more intuitive: [c0000001fa46fde0] [c00000000026719c] SyS_read+0x6c/0x110 [c0000001fa46fe30] [c000000000009264] system_call+0x38/0xd0 ie. we were handling a system call, and it was SyS_read(). Signed-off-by: -
Ryan Grimm authored
When unbinding and rebinding the driver on a system with a card in PHB0, this error condition is reached after a few attempts: ERROR: Bad of_node_put() on /pciex@3fffe40000000 CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152 Call Trace: [c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable) [c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0 [c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0 [c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30 [c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50 [c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0 [c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170 [c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0 [c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160 [c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60 [c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0 [c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0 [c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260 [c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100 [c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98 We are missing a call to of_node_get(). pnv_pci_to_phb_node() should call of_node_get() otherwise np's reference count isn't incremented and it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node() so it's clear it calls of_node_get(). Signed-off-by:
Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
- 28 Jan, 2015 7 commits
-
-
Gavin Shan authored
On PowerNV platform, the OPAL interrupts are exported by firmware through device-node property (/ibm,opal::opal-interrupts). Under some extreme circumstances (e.g. simulator), we don't have this property found from the device tree. For that case, we shouldn't allocate the interrupt map. Otherwise, slab complains allocating zero sized memory chunk. Signed-off-by:
-
Gavin Shan authored
The patch put the OPAL interrupt setup logic in opal_init() into seperate function opal_irq_init() for easier code maintaining. The patch doesn't introduce logic changes except: * Rename variable names. * Release virtual IRQ upon error from request_irq(). * Don't cache the virtual IRQ to opal_irqs[] upon error from request_irq(). Suggested-by: -
Michael Ellerman authored
In commit c8742f85 "powerpc/powernv: Expose OPAL firmware symbol map" I added pr_fmt() to opal.c. This left some existing pr_xxx()s with duplicate "opal" prefixes, eg: opal: opal: Found 0 interrupts reserved for OPAL Fix them all up. Also make the "Not not found" message a bit more verbose. Signed-off-by:
-
Michael Ellerman authored
Remove slice_set_psize() which is not used. It was added in 3a8247cc "powerpc: Only demote individual slices rather than whole process" but was never used. Remove vsx_assist_exception() which is not used. It was added in ce48b210 "powerpc: Add VSX context save/restore, ptrace and signal support" but was never used. Remove generic_mach_cpu_die() which is not used. Its last caller was removed in 375f561a "powerpc/powernv: Always go into nap mode when CPU is offline". Remove mpc7448_hpc2_power_off() and mpc7448_hpc2_halt() which are unused. These were introduced in c5d56332 "[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform" but were never used. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> [mpe: Update changelog with details on when/why they are unused] Signed-off-by:
-
Michael Ellerman authored
Signed-off-by: -
Michael Ellerman authored
Signed-off-by: -
Kim Phillips authored
arch/powerpc has __kernel_map_pages implementations in mm/pgtable_32.c, and mm/hash_utils_64.c, of which the former is built for PPC32, and the latter for PPC64 machines with PPC_STD_MMU. Fix arch/powerpc/Kconfig to not select ARCH_SUPPORTS_DEBUG_PAGEALLOC when CONFIG_PPC_STD_MMU_64 isn't defined, i.e., for 64-bit book3e builds to use the generic __kernel_map_pages() in mm/debug-pagealloc.c. LD init/built-in.o mm/built-in.o: In function `kernel_map_pages': include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' Makefile:925: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
- 27 Jan, 2015 2 commits
-
-
Pranith Kumar authored
When CONFIG_PRINTK=n, log_buf_addr_get() returns NULL and log_buf_len_get() return 0. Check for these return values and skip registering the dump buffer. Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Reviewed-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Cyril Bur authored
RTAS events require arguments be passed in big endian while hypercalls have their arguments passed in registers and the values should therefore be in CPU endian. The "ibm,suspend_me" 'RTAS' call makes a sequence of hypercalls to setup one true RTAS call. This means that "ibm,suspend_me" is handled specially in the ppc_rtas() syscall. The ppc_rtas() syscall has its arguments in big endian and can therefore pass these arguments directly to the RTAS call. "ibm,suspend_me" is handled specially from within ppc_rtas() (by calling rtas_ibm_suspend_me()) which has left an endian bug on little endian systems due to the requirement of hypercalls. The return value from rtas_ibm_suspend_me() gets returned in cpu endian, and is left unconverted, also a bug on little endian systems. rtas_ibm_suspend_me() does not actually make use of the rtas_args that it is passed. This patch removes the convoluted use of the rtas_args struct to pass params to rtas_ibm_suspend_me() in favour of passing what it needs as actual arguments. This patch also ensures the two callers of rtas_ibm_suspend_me() pass function parameters in cpu endian and in the case of ppc_rtas(), converts the return value. migrate_store() (the other caller of rtas_ibm_suspend_me()) is from a sysfs file which deals with everything in cpu endian so this function only underwent cleanup. This patch has been tested with KVM both LE and BE and on PowerVM both LE and BE. Under QEMU/KVM the migration happens without touching these code pathes. For PowerVM there is no obvious regression on BE and the LE code path now provides the correct parameters to the hypervisor. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
- 23 Jan, 2015 17 commits
-
-
Anton Blanchard authored
Add a testcase for the new ppc64 memcmp. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
I noticed ksm spending quite a lot of time in memcmp on a large KVM box. The current memcmp loop is very unoptimised - byte at a time compares with no loop unrolling. We can do much much better. Optimise the loop in a few ways: - Unroll the byte at a time loop - For large (at least 32 byte) comparisons that are also 8 byte aligned, use an unrolled modulo scheduled loop using 8 byte loads. This is similar to our glibc memcmp. A simple microbenchmark testing 10000000 iterations of an 8192 byte memcmp was used to measure the performance: baseline: 29.93 s modified: 1.70 s Just over 17x faster. v2: Incorporated some suggestions from Segher: - Use andi. instead of rdlicl. - Convert bdnzt eq, to bdnz. It's just duplicating the earlier compare and was a relic from a previous version. - Don't use cr5, we have plans to use that CR field for fast local atomics. Signed-off-by:
-
Gavin Shan authored
The callback (ppc_md.pci_probe_mode()) is used to determine if the child PCI devices of the indicated PCI bus should be probed from device-tree or hardware. On PowerNV platform, we always expect probing PCI devices from hardware, which is PowerPC PCI core's default behaviour. Also, the callback had some delay implemented based on PHB's device node property "reset-clear-timestamp", which wasn't exported from skiboot. So we don't need this function and it's safe to remove it. Signed-off-by:
-
Gavin Shan authored
When PE's frozen count hits maximal allowed frozen times, which is 5 currently, it will be forced to be offline permanently. Once the PE is removed permanently, rebooting machine is required to bring the PE back. It's not convienent when testing EEH functionality. The patch exports the maximal allowed frozen times through debugfs entry (/sys/kernel/debug/powerpc/eeh_max_freezes). Requested-by:
-
Gavin Shan authored
The conditions that one specific PE's frozen count exceeds the maximal allowed times (EEH_MAX_ALLOWED_FREEZES) and it's in isolated or recovery state indicate the PE was removed permanently implicitly. The patch introduces flag EEH_PE_REMOVED to indicate that explicitly so that we don't depend on the fixed maximal allowed times, which can be varied as we do in subsequent patch. Flag EEH_PE_REMOVED is expected to be marked for the PE whose frozen count exceeds the maximal allowed times, or just failed from recovery. Requested-by:
-
Gavin Shan authored
PE#0 should be regarded as valid for P7IOC, while it's invalid for PHB3. The patch adds flag EEH_VALID_PE_ZERO to differentiate those two cases. Without the patch, we possibly see frozen PE#0 state is cleared without EEH recovery taken on P7IOC as following kernel logs indicate: [root@ltcfbl8eb ~]# dmesg : pci 0000:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0000:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0001:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0001:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0002:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0002:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0003:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0003:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0003:20 : [PE# 002] Secondary bus 32..63 associated with PE#2 : EEH: Clear non-existing PHB#3-PE#0 EEH: PHB location: U78AE.001.WZS00M9-P1-002 Signed-off-by: -
Gavin Shan authored
When calling to early_setup(), we pick "boot_paca" up for the master CPU and initialize that with initialise_paca(). At that point, the SLB shadow buffer isn't populated yet. Updating the SLB shadow buffer should corrupt what we had in physical address 0 where the trap instruction is usually stored. This hasn't been observed to cause any trouble in practice, but is obviously fishy. Fixes: 6f4441ef ("powerpc: Dynamically allocate slb_shadow from memblock") Signed-off-by:
-
Emil Medve authored
num_possible_cpus() is just a shorthand for it. Signed-off-by:
Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by:
-
Naveen N. Rao authored
Currently, all non-dot symbols are being treated as function descriptors in ABIv1. This is incorrect and is resulting in perf probe not working: # perf probe do_fork Added new event: Failed to write event: Invalid argument Error: Failed to add events. # dmesg | tail -1 [192268.073063] Could not insert probe at _text+768432: -22 perf probe bases all kernel probes on _text and writes, for example, "p:probe/do_fork _text+768432" to /sys/kernel/debug/tracing/kprobe_events. In-kernel, _text is being considered to be a function descriptor and is resulting in the above error. Fix this by changing how we lookup symbol addresses on ppc64. We first check for the dot variant of a symbol and look at the non-dot variant only if that fails. In this manner, we avoid having to look at the function descriptor. While at it, also separate out how this works on ABIv2 where we don't have dot symbols, but need to use the local entry point. Signed-off-by:Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Once upon a time, at least 9 years ago (< 2.6.12), _TIF_SYSCALL_T_OR_A meant "TRACE or AUDIT". But these days it means TRACE or AUDIT or SECCOMP or TRACEPOINT or NOHZ. All of those are implemented via syscall_dotrace() so rename the flag to that to try and clarify things. Signed-off-by: -
Michael Ellerman authored
We removed the last usage of CPU_FTR_IABR in commit 1ad7d705 "powerpc/xmon: Enable HW instruction breakpoint on POWER8". Mark it as free. Signed-off-by:
-
Paul Mackerras authored
Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> mpe: Fix compile errors and formatting. Add tempfile logic to Makefile. Signed-off-by:
-
Anshuman Khandual authored
This patch includes all of the powerpc test binaries into the .gitignore file listing in their respective directories. This will make sure that git ignores all of these test binaries when displaying status. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
Wei Yang authored
pci_dn->phb is set to phb in update_dn_pci_info(), if succeed. This patch removes the duplication of pci_dn->phb initialization. Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by:
-
Thadeu Lima de Souza Cascardo authored
When IOMMU bypass is enabled, a PCI device can read and write memory that was not mapped by the driver without causing an EEH. That might cause memory corruption, for example. When we disable bypass, DMA reads and writes to addresses not mapped by the IOMMU will cause an EEH, allowing us to debug such issues. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Reviewed-by:
-
Anshuman Khandual authored
The current handling of EPOW_SHUTDOWN_ON_UPS event does not shutdown the system after logging the message. All the events of EPOW_SYSTEM_SHUTDOWN action code (EPOW_SHUTDOWN_ON_UPS is a part of it) must initiate system shutdown as per the SPAPR spec. If the LPAR does not shutdown after receiving this rtas based event, it will expose itself to a forced abrupt shutdown initiated by the platform firmware. This patch fixes the situation. Signed-off-by:
-
Wei Yang authored
The M64 range information is missed in dmesg, which would be helpful in debug. This patch prints the M64 range information in the same format as M32. Signed-off-by:
-
- 22 Jan, 2015 8 commits
-
-
Ryan Grimm authored
Adds reset to sysfs which will PERST the card. If load_image_on_perst is set to "user" or "factory", the PERST will cause that image to be loaded. load_image_on_perst is set to "user" for production. "none" could be used for debugging. The PSL trace arrays are preserved which then can be read through debugfs. PERST also triggers CAPP recovery. An HMI comes in, which is handled by EEH. EEH unbinds the driver, calls into Sapphire to reinitialize the PHB, then rebinds the driver. Signed-off-by:
-
Ryan Grimm authored
Turning snoops on is the last step in CAPP recovery. Sapphire is expected to have reinitialized the PHB and done the previous recovery steps. Add mode argument to opal call to do this. Driver can turn snoops off although it does not currently. Signed-off-by:
-
Ryan Grimm authored
load_image_on_perst identifies whether a PERST will cause the image to be flashed to the card. And if so, which image. Valid entries are: "none", "user" and "factory". A value of "none" means PERST will not cause the image to be flashed. A power cycle to the pcie slot is required to load the image. "user" loads the user provided image and "factory" loads the factory image upon PERST. sysfs updates the cxl struct in the driver then calls cxl_update_image_control to write the vals in the VSEC. Signed-off-by:
-
Ryan Grimm authored
Select defaults such that a PERST causes flash image reload. Select which image based on what the card is set up to load. CXL_VSEC_PERST_LOADS_IMAGE selects whether PERST assertion causes flash image load. CXL_VSEC_PERST_SELECT_USER selects which image is loaded on the next PERST. cxl_update_image_control writes these bits into the VSEC. Signed-off-by:
-
Philippe Bergheaud authored
This fixes two typos and explains where shared attributes are stored. Signed-off-by:
Philippe Bergheaud <felix@linux.vnet.ibm.com> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Ian Munsie authored
This patch adds tracepoints throughout the cxl driver, which can provide insight into: - Context lifetimes - Commands sent to the PSL and AFU and their completion status - Segment and page table misses and their resolution - PSL and AFU interrupts - slbia calls from the powerpc copro_fault code These tracepoints are mostly intended to aid in debugging (particularly for new AFU designs), and may be useful standalone or in conjunction with hardware traces collected by the PSL (read out via the trace interface in debugfs) and AFUs. Signed-off-by:
-
Colin Ian King authored
hwirq has not been initialized, however it is being incremented and also not being referenced in a loop. This error was detected with cppcheck: [drivers/misc/cxl/irq.c:439]: (error) Uninitialized variable: hwirq Commit 80fa93fc ("cxl: Name interrupts in /proc/interrupt") introduced this error. This is a simple fix that removes the redundant increment. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-By:
-
Michael Ellerman authored
Signed-off-by:
-
