Merge tag 'omap-for-v3.16/dt-part2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "ARM: omap dt changes for v3.16 merge window, part 2" From Tony Lindgren:

Device tree related changes for omaps.

* tag 'omap-for-v3.16/dt-part2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits)
  ARM: dts: Enable mcpdm and mcbsp1 on DuoVero
  ARM: dts: Convert DuoVero Parlor to use IOPAD macro
  ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
  ARM: dts: dra7: add support for parallel NAND flash
  ARM: dts: am437x-gp-evm: Add ethernet support for GP EVM
  ARM: dts: am4372: Add cpsw phy sel dt node
  ARM: OMAP2+: Use pdata quirks for wl12xx on VAR-STK/DVK-OM44
  ARM: dts: Add VAR-SOM-OM44 WLAN nodes
  ARM: dts: Add support for OMAP4 VAR-DVK-OM44
  ARM: dts: Add support for OMAP4 Variscite OM44 family
  ARM: dts: Change IOPAD macro's for OMAP4/5
  ARM: dts: AM33XX: fix ethernet and mdio default state
  ARM: dts: am4372: Add hdq device tree data
  ARM: omap2+: skip device build from platform code for dt
  dts: dra7-evm: add USB support
  ARM: dts: dra7: Add USB related nodes
  ARM: dts: dra7-clock: Add "l3init_960m_gfclk" clock gate
  ARM: dts: omap4+: Add clocks to USB2 PHY node
  ARM: dts: dra7: add OCP2SCP3 and SATA nodes
  ARM: dts: omap5: add sata node
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merging in a local copy from the next/soc branch to avoid some annoying
context conflicts in the dts Makefile.

* mvebu/soc-orion5x: (29 commits)
  ARM: orion: remove no longer needed gpio DT code
  ARM: orion: remove no longer needed DT IRQ code
  ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
  ARM: orion5x: convert d2net to Device Tree
  ARM: orion5x: convert RD-88F5182 to Device Tree
  ARM: orion5x: remove unneeded code for edmini_v2
  ARM: orion5x: keep TODO list in edmini_v2 DT
  ARM: orion5x: use DT to describe NOR on edmini_v2
  ARM: orion5x: use DT to describe EHCI on edmini_v2
  ARM: orion5x: use DT to describe I2C devices on edmini_v2
  ARM: orion5x: convert edmini_v2 to DT pinctrl
  ARM: orion5x: add standard pinctrl configs for sata0 and sata1
  ARM: orion5x: add Device Bus description at SoC level
  ARM: orion5x: update I2C description at SoC level
  ARM: orion5x: enable pinctrl driver at SoC level
  ARM: orion5x: switch to DT interrupts and timer
  ARM: orion: switch to a per-platform handle_irq() function
  ARM: orion5x: convert to use 'clocks' property for UART controllers
  ARM: orion5x: switch to use the clock driver for DT platforms
  ARM: orion5x: add interrupt for Ethernet in Device Tree
  ...

Merge "mvebu DT changes for v3.16 (incremental #2)" from Jason Cooper:

 - kirkwood
    - add OpenRD boards
    - make keymile boards bootable with latest kernels

 - mvebu
    - add ehci/xhci to Armada 375/38x boards

* tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file
  ARM: dts: kirkwood: add kirkwood-km_common DTSI files
  ARM: dts: kirkwood: resynch 98dx4122 dtsi
  ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375
  ARM: mvebu: add Device Tree description of the xHCI controller on Armada 375
  ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38x
  ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x
  ARM: Kirkwood: DT versions of OpenRD boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "Allwinner DT changes for 3.16, take 2" from Maxime Ripard:

  - Introduction of a new board, the i12-tvbox
  - Enable the MMC and USB controllers on the Colombus
  - Add the enable-method to the A31 cpus
  - a few fixes

* tag 'sunxi-dt-for-3.16-2' of https://github.com/mripard/linux:
  ARM: dts: sun7i: Add new i12-tvbox board
  ARM: dts: sun7i: cubietruck: set mmc3 bus-width property
  ARM: sun6i: Add MMC0 controller to the Colombus board
  ARM: sun6i: Fix OHCI2 node name
  ARM: sun6i: Enable USB Host support on the Colombus board
  ARM: sunxi: Add fixed 3V regulator
  ARM: sun6i: Define the A31 CPUs enable-method
  ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	arch/arm/boot/dts/Makefile

Merge "mach-bcm dt updates for 3.16" from Matt Porter:

* Add PWM support to bcm281xx and bcm28155 ap board
* Add gpldo and vbus regulators to bcm590xx

* tag 'for-3.16/bcm-dt' of git://github.com/broadcom/mach-bcm:
  ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
  ARM: dts: Enable the PWM for bcm28155 AP board
  ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into for-next

Merge "Qualcomm ARM Based Device Tree Updates for v3.16" from Kumar Gala:

* Added device tree nodes for pinctrl and SDHC for msm8974 SoC/DB8074 board
* Added binding spec for GSBI configuration node

* tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  soc: qcom: Add device tree binding for GSBI
  ARM: dts: msm: Add SDHC controller nodes for MSM8974 and DB8074 board
  ARM: dts: MSM8974: Add pinctrl node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3.16 third DT series:
- move of both at91sam9n12 and at91sam9x5 to CCF

* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
  ARM: at91: move sam9n12 SoC to the CCF
  ARM: at91/dt: define sam9n12ek crystal frequencies
  ARM: at91/dt: define sam9n12 clocks
  ARM: at91: prepare common clk transition for sam9n12 SoC
  ARM: at91: move sam9x5 SoCs to the CCF
  ARM: at91/dt: define sam9x5ek's crystal frequencies
  ARM: at91/dt: define sam9x5 clocks
  ARM: at91: prepare common clk transition for sam9x5 SoCs
  dt-bindings: clock: Move at91.h to dt-bindigs/clock
  ARM: at91: fix spi cs on sama5d3 Xplained board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	arch/arm/boot/dts/at91sam9rl.dtsi

Needed as a dependency for the at91/dt2 branch
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "ARM: STi: DT changes for v3.16, v3" from Maxime Coquelin:

Please consider these STi DT updates for v3.16.

This 3rd version takes into account Olof's comments on the v2:
        - Fix upper-cases in labels and node names
        - Sort compatibles order from specific to generic
        - Sort dts entries in Makefile

It also adds support for the B2020 revision E board for STiH416 SoC.

Note that two reset patches are part of this pull request, in order to avoid
compilation breakage.
Adding these two patches in this pull request has been accepted by Philipp Zabel.

* tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti: (23 commits)
  ARM: sti: stih41x: Provide a proper header for this DTSI file
  ARM: sti: stih416: Enable board LED support for B2020 RevE
  ARM: sti: stih416: Add support for B2020 RevE
  ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
  ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9
  ARM: STi: DT: STiH415: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks
  ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock
  ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12
  ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU
  ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F
  ARM: STi: DT: STiH416: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks
  ARM: STi: DT: STiH416: Remove unused CLK_S_ICN_REG_0 fixed clock
  ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12
  ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysin
  ARM: STi: DT: add keyscan for stih41x-b2000
  ARM: STi: DT: add keyscan for stih416
  ARM: STi: DT: add keyscan for stih415
  driver: reset: sti: add keyscan for stih416
  driver: reset: sti: add keyscan for stih415
  ARM: dts: STiH407: Add B2120 board support
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add device tree binding support for the QCOM GSBI driver.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Adds additional nodes to support GPLDO1-6 and VBUS regulators which
are now supported in the bcm590xx regulator driver.
Signed-off-by: Matt Porter <mporter@linaro.org>

Add support for the 2 SDHC controllers on the DB8074 board.  The first
controller (at 0xf9824900) is connected to an on board soldered eMMC.
The second controller (at 0xf98a4900) is connected to a uSD card slot.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add the pin control node and pin definitions of SPI8.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch removes the selection of AT91_USE_OLD_CLK when selecting
sam9n12 SoC support. This will automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Define sam9n12ek's main and slow crystal frequencies.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Define sam9n12 clocks and make use of them in peripheral definitions.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9n12 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch removes the selection of AT91_USE_OLD_CLK when selecting
sam9x5 SoCs support. This will automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Define sam9x5ek's main and slow crystal frequencies.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Define sam9x5 clocks in sam9x5 dt files and make use of them in peripheral
definitions.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9x5 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The i12 tvbox is an A20 based android tvbox, with 512M / 1G RAM, 4G nand flash,
ap6210 or ap6330 sdio wifi + bt (broadcom sdio wifi + uart attached brcm bt),
2USB host ports using USB-A receptacles and a micro-usb receptacle for USB OTG,
and 100Mbit ethernet using an IP101a phy.

The PCB is labelled i12-a20 hence I've named the board i12-a20. It is used
in noname allwinner A20 tv-boxes, which are sometimes sold with Q5 or
QT840A as product name.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

bus-width defaults to 1, and all 4 lines are hooked up at the cubietruck,
properly set bus-width to 4.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Colombus has a full size SD slot wired to the MMC0 controller. In order to
work, the MMC lines have to have the pull-ups enabled though.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

The unit-address doesn't match the reg property. Since the reg property is
correct, change the unit-address accordingly.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The colombus board has a on-board USB hub, that is enabled through the pin
PH24, and wired to the first EHCI controller.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung DT updates for v3.16

- exynos4
  : add missing pinctrls

- exynos4412-trats2
  : update camera nodes and add rear camera nodes
  : rename alias for i2c_ak8975 label
  Update camera nodes for exynos4 and exynos4412-trats2

- exynos5250
  : update DWC3 usb controller and enable to use generic USB DRD phy

- exynos5250-snow
  : enable dp-controller, fimd, hdmi and pwm backlight
  : add sound node and Vbus regulator for USB 3.0
  : add tps65090 power regulator
  : add pinctrl for EC irq and i2c-arbitrator

- exynos5420
  : change to correct compatible string for hdmi
  : add PD entry to MFC codec and enable DWC3 and USB 3.0 PHY
  : add MFC memory banks for smdk5420 and arndale-octa boards

- exynos5420-peach-pit
  : add support exynos5420 based peach-pit board
  : add sound node and Vbus regulatro for USB 3.0
  : enable dp-controller, fimd
- exynos5420-smdk5420
  : add Vbus regulatro for USB 3.0

- use generic DT bindings for map SYSRAM

[olof: Fixed up conflict with a fix for 4212 secondary CPU startup, carrying
over the fix to the reworked code]

* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits)
  ARM: dts: Add MFC memory banks to exynos5420 boards
  ARM: dts: enable dp-controller for exynos5420-peach-pit board
  ARM: dts: enable fimd for exynos5420 based peach-pit board
  ARM: dts: enable dp-controller for exynos5250-snow board
  ARM: dts: enable fimd for exynos5250-snow board
  ARM: dts: enable pwm backlight for exynos5250-snow
  ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
  ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420
  ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pit
  ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snow
  ARM: dts: Add PD entry to MFC codec on exynos5420
  ARM: dts: Add sound node for exynos5420-peach-pit board
  ARM: dts: Add sound node for exynos5250-snow board
  ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250
  ARM: dts: Enable support for generic USB DRD phy for exynos5250
  ARM: dts: Enable support for DWC3 controller for exynos5420
  ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420
  ARM: dts: enable hdmi for exynos5420-peach-pit board
  ARM: dts: change to correct compatible string for exynos5420 hdmi
  ARM: dts: enable hdmi for exynos5250 based snow board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merging in Samsung fixes for 3.15-rc to avoid an annoying context conflict
with new DT code.

* commit '702b691e':
  ARM: dts: Remove g2d_pd node for exynos5420
  ARM: dts: Remove mau_pd node for exynos5420
  ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
  ARM: dts: disable MDMA1 node for exynos5420
  ARM: EXYNOS: fix the secondary CPU boot of exynos4212
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Merge "ARM: tegra: device tree changes for 3.16" from Stephen Warren:

The bulk of Tegra changes for 3.16 are to device trees. Highlights are:

- New board support for:
  - Jetson TK1.
  - SHIELD.
  - Tegra Note 7.
  - Colibri T30 module.
- HDMI support on Venice2.
- SD card write-protect GPIOs added to some boards.
- Numerous regulator cleanups.

* tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: initial add of Colibri T30
  ARM: tegra: add device tree for SHIELD
  ARM: tegra: add SD wp-gpios to Venice2 DT
  ARM: tegra: add Tegra Note 7 device tree
  ARM: tegra: add SD wp-gpios to Dalmore DT
  ARM: tegra: add SD wp-gpios to Jetson TK1 DT
  ARM: tegra: use correct audio CODEC on Jetson TK1
  ARM: tegra: dalmore - Add DSI power supply
  ARM: tegra: dalmore - Add +5V HDMI supply
  ARM: tegra: beaver - Add +5V HDMI supply
  ARM: tegra: harmony - Add +5V HDMI supply
  ARM: tegra: jetson-tk1 - Enable HDMI support
  ARM: tegra: venice2 - Enable HDMI
  ARM: tegra: Add Tegra124 HDMI support
  ARM: tegra: fix Venice2 SD card VQMMC supply
  ARM: tegra: make Venice's +3.3V_RUN regulator always on
  ARM: tegra: fix Jetson TK1 SD card supply
  ARM: tegra: define Jetson TK1 regulators
  ARM: tegra: add Jetson TK1 device tree
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "ARM: imx: device tree changes for 3.16" from Shawn Guo:

i.MX device tree changes for 3.16:
 - New board support: imx35-pdk, imx51-digi-connectcore, imx6dl-phytec,
   imx6dl-riotboard, and vf610-colibri.
 - Improve device tree support for imx51-babbage and eukrea-cpuimx51 to
   get the same level support as board files, so that we can kill the
   board files.
 - Quite some updates on imx27-phytec-phycore board support from
   Alexander Shiyan
 - Enable USB, sound and touchscreen on the eukrea imx25/35/51 boards,
   from Denis Carikli
 - Quite a lot of patches from Fabio Estevam, updating Freescale
   imx25-pdk and imx27-pdk board support
 - Correct USB device configuration for imx25/35
 - Fixes i2c4 device node in imx6dl.dtsi regarding to compatible string
   and clock data
 - Enable HDMI, TVE, LVDS display support on a bunch of imx5/6 boards
 - Update PCIe to the new binding and enable PCIe support on
   imx6qdl-sabresd board
 - A couple of imx6q-dmo-edmqmx6 updates from Lucas Stach, adding pfuze
   irq gpio and SPI flash
 - Enable CODA7541 VPU for i.MX53
 - A series of updates on imx6qdl-phytec boards from Philipp Zabel
 - Small cleanups and fixes on board imx28-duckbill - Michael Heimpold
 - Add stdout-path property to i.MX boards
 - Karo TX25 board updates from Sascha Hauer
 - Enable pwm and sdhc devices for board vf610-twr

* tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (105 commits)
  ARM: dts: imx35-pdk: Fix memory region description
  ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support
  ARM: dts: imx6: add new board RIoTboard
  ARM: dts: imx6: i2c4 cleanup
  ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
  ARM: dts: Karo TX25: use hardware ecc
  ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC
  ARM: dts: Karo TX25: Add pinctrl nodes
  ARM: dts: i.MX25: Add IRAM node
  ARM: dts: i.MX25: Add mmc aliases
  ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
  ARM: dts: imx6qdl-sabresd: Add USDHC4 support
  ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
  ARM: dts: imx6: edmqmx6: add SPI bus and flash
  ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
  ARM: dts: imx6q-udoo: Add HDMI support
  ARM: dts: Add stdout-path property to i.MX boards
  ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
  ARM: dts: imx: add LVDS backlight for Ventana
  ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "Allwinner DT additions for 3.16" from Maxime Ripard:

  - Introduction of the MMC controlers
  - New board: A10s R7, Mele M9, APP4-EVB1
  - Enabled the PMU on the Cortex A7-based SoCs

* tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux: (38 commits)
  ARM: sunxi: dt: declare the r_pio pin controller for A31 SoC
  ARM: sunxi: dt: add PRCM clk and reset controller subdevices
  ARM: sunxi: dt: add APP4-EVB1 board support
  ARM: sun6i: dt: Add support for the USB controllers
  ARM: sun6i: Add the USB clocks to the DTSI
  ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
  ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
  ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
  ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
  ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
  ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi
  ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module
  ARM: dts: sun7i: Enable mmc controller on various A20 boards
  ARM: dts: sun7i: Add pin-muxing info for the mmc controllers
  ARM: dts: sun7i: Add mmc controller nodes
  ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9
  ARM: dts: sun6i: Add mmc controller nodes
  ARM: dts: sun6i: Add mmc clocks
  ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards
  ARM: dts: sun5i: Add mmc controller nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Just a trivial commenting fix.  No functional changes.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

There are two LEDs available on the B2020 RevE board, one red, one
green.  In this patch we enable the red one for "heartbeat" and turn
the green one off.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

The B2020 RevE differs from the other B2020 boards in a few subtle ways;
including the Ethernet reset GPIO which this patch adds support for and
the LED wiring which will follow in a latter patch.  Without supplying
these differences Ethernet and the board LEDs simply will not work.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

Interconnect clocks are not yet managed at the init, then
we have to start the kernel with clk_ignore_unused.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

Patch adds DT entries for clockgen A9
Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

CLK_S_GMAC0_PHY &  CLK_S_ETH1_PH clocks are no longer used.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

CLK_S_ICN_REG_0 clock is no longer used.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>