Remove wildcard compatible string.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add Spreadtrum SC27XX fuel gauge device node to calculate the
battery capacity.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add charger device node and related battery node for SC2731 PMIC.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch adds phandles to the calibration cells provided by the Efuse
device, which is used to calibrate the ADC channel scales.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Spreadtrum PMIC INTC controller has no registers to set trigger type,
since it is always high level trigger as default. So remove its child
devices' irq trigger type setting and change #interrupt-cells to 1.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

rockpro64 regulator improvements, rock960 improvements (tsadc, wifi, hdmi
audio), nanopi4 bluetooth support and rk3328-roc-cc gmac improvement.

* tag 'v5.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Enable tsadc device on rock960
  arm64: dts: rockchip: Add on-board WiFi/BT support for Rock960 boards
  arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues
  arm64: dts: rockchip: rockpro64 dts add usb regulator
  arm64: dts: rockchip: rockpro64 dts remove unused lcd-reset pinmux
  arm64: dts: rockchip: rockpro64 dts make regulator more readable
  arm64: dts: rockchip: Add nanopi4 bluetooth
  arm64: dts: rockchip: enable mali power supply on rk3399-rockpro64
  arm64: dts: rockchip: Enable HDMI audio devices on rk3399-rock960
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.1-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

A number of improvements for rv1108 boards, removal of an obsolete property
from the Edison tablet and a chosen node for veyron devices.

* tag 'v5.1-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add chosen node on veyron devices
  ARM: dts: rockchip: remove cap-mmc-highspeed from rk3188-bqedison2qc mmc1 node
  ARM: dts: rockchip: Use the correct regulator properties on rv1108-evb
  ARM: dts: rockchip: Use the correct regulator properties on rv1108-elgin
  ARM: dts: rockchip: Fix vcc5/6-supply representation on rv1108-elgin
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the thermal sensor. This device also provides
temperature shutdown protection. The shutdown value is
set at 110C, as tested by the vendor.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

In order to use earlycon, the stdout-path property needs to be set
in the chosen node. All veyron devices use uart2 for debugging, so
add it to the core veyron dtsi.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The mmc1 pins are used for SDIO with a wifi chip.
The function mmc_sdio_switch_hs() only checks for MMC_CAP_SD_HIGHSPEED and
not for MMC_CAP_MMC_HIGHSPEED, so cap-mmc-highspeed can be removed.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'qcom-dts-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm Device Tree Changes for v5.1 - Part 2

* Fix MSI IRQ type on IPQ4019

* tag 'qcom-dts-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: ipq4019: Fix MSI IRQ type
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm ARM64 Updates for v5.1

* Add thermal trip points to cpufreq
* Add SDM845 IOMMU info for SDHC, USB, and WLAN
* Fix MSM8916 clock cell argument

* tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: sdm845: Fixup dependency on RPMPD includes
  arm64: dts: sdm845: Add clocks and iommus to WCN3990 WLAN node
  arm64: dts: qcom: sdm845: Define iommus for USB controllers
  arm64: dts: qcom: sdm845: Define IOMMU for sdhc 2
  arm64: dts: sdm845: wireup the thermal trip points to cpufreq
  arm64: dts: msm8916: remove bogus argument to the cpu clock

[arnd: I've pulled the earlier branch again after an update, this
 adds the stuff listed above, and fixes a build error from the missing
 dependency, as I requested]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into HEAD

AM654x SoC updates for v5.1 (part 2)

Contains a few DT updates on top of part 1 of the pull:

- MSMC RAM support (on-chip SRAM)
- Main system control module support
- USB support
- ADC support

There is an extra dt-binding update included, which has been acked
by Rob.

* tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-am65-mcu: Add ADC nodes
  dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs
  arm64: dts: ti: k3-am654-base-board: enable USB1
  arm64: dts: ti: k3-am6: add USB support
  arm64: dts: ti: am654: Add Main System Control Module node
  arm64: dts: ti: k3-am65: Add MSMC RAM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch fixes a dependency issue with the RPMPD dt bindings.  This
temporarily removes the include file and adds hardcoded values for the
OPPs until the other changes full land.  This will be addressed in 5.2.

Fixes: 5b6f186f ("arm64: dts: sdm845: Add rpmh powercontroller node")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Merge tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

More dts changes for omaps

We add support for Bosch Guardian am335x device, and configure more
devices like GNSS and LCD backlight for omap3-gta04. And we replace
the wlcore binding documentation URL with a local file that we have.

* tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3-gta04: declare backlight in lcd node
  ARM: dts: am335x: Add support for Bosch Guardian
  ARM: dts: gta04: add gps support
  ARM: dts: gta04: add ldo 3v3 regulator
  ARM: dts: gta04: add pinctrl settings for wkup domain
  ARM: dts: omap3-gta04a5: Replace LXR reference with a local one
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'uniphier-dt64-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM64 SoC DT updates for v5.1

- Add PCI Express controller nodes

* tag 'uniphier-dt64-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: sort labels in the same order as in dtsi
  arm64: dts: uniphier: Add PCIe host controller and PHY nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 5.1

 - Enable QSPI NOR on sama5d2 SoM1
 - replace deprecated gpio-key,wakeup property

* tag 'at91-5.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: replace gpio-key,wakeup with wakeup-source property
  ARM: dts: at91: at91-sama5d27_som1_ek: enable qspi1 memory
  ARM: dts: at91: at91-sama5d27_som1: add QSPI1 + SPI NOR memory nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: zynq: DT changes for v5.1

- Use new "wakeup-source" instead of "gpio-key,wakeup" in Z-Turn

* tag 'zynq-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: zynqmp: DT changes for v5.1

- Extend timeout for wifi to power up on Ultra96

* tag 'zynqmp-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zcu100-revC: Give wifi some time after power-on
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.1:
 - Add initial i.MX8QXP SoC and MEK board support.
 - Various device additions to i.MX8MQ SoC and EVK board support:
   RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
 - Use generic node name for m25p80 flash on layerscape devices.
 - Add num-viewport property for layerscape PCIe devices, and
   incr-burst-type-adjustment for USB3 devices.
 - Add LS1012AX based Oxalis board support.
 - Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
 - Add SMMU device and missing dma-coherent property in fsl-mc for
   LS1088 SoC.

* tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
  arm64: dts: imx8mq: specify dma-ranges
  arm64: dts: imx8mq: Add ARM PMU node
  arm64: dts: imx8mq: Add RTC support
  arm64: dts: imx8mq-evk: Enable the QuadSPI controller
  arm64: dts: imx8mq: Add QuadSPI controller
  arm64: dts: imx8mq: Add ECSPI support
  arm64: dts: imx8mq-evk: Add fsl,magic-packet property
  arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes
  arm64: dts: imx8mq-evk: enable USB nodes for USB3 host
  arm64: dts: imx8mq: add USB nodes
  arm64: dts: imx8mq: properly describe IRQ hierarchy
  arm64: dts: lx2160a: update fspi node
  arm64: dts: freescale: Add devicetree for Oxalis
  arm64: dts: lx2160a: add FlexSPI node property
  arm64: dts: imx8qxp: Fix MU4_INT number
  arm64: dts: imx8mq: add GPC power domains
  arm64: dts: imx8mq: Add pwm device nodes
  arm64: dts: imx: add i.MX8QXP system controller RTC support
  arm64: dts: imx: add imx8qxp mek support
  arm64: dts: imx: add imx8qxp support
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX device tree changes for 5.1:
 - New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec
   phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards.
 - Add regulator control for various sensors on imx6qdl-sabresd board.
 - Add DISPLAY power domain support for i.MX6SX SoC.
 - Add stmpe-adc device node for Toradex iMX6 module.
 - Switch to SPDX identifier for imx6q-tbs2910 board.
 - Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board.
 - Mark I2C recovery GPIOs as open drain and correct and WEIM range
   configuration for apalis/colibri boards.
 - Small and random updates to various devices.

* tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
  ARM: dts: imx: Add support for Logic PD i.MX6QD EVM
  ARM: dts: imx6qdl-sabresd: remove reg_sensors' regulator-always-on
  ARM: dts: imx6qdl-sabresd: add regulators control for mma8451 sensor
  ARM: dts: imx6qdl-sabresd: add regulators control for mag3110 sensor
  ARM: dts: imx6qdl-sabresd: add regulator control for isl29023 sensor
  ARM: dts: vf610: Add ZII SSMB DTU board
  ARM: dts: pfla02: add ksz9031 clock skew values
  ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller property
  ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
  ARM: dts: Add devicetree compatibles for LS1021A based boards
  ARM: dts: colibri: use valid range configuration for weim
  ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin
  ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drain
  ARM: dts: vf610-zii-ssmb-spu3: Pass "no-sdio"/"no-sd" properties
  ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards
  ARM: dts: imx7ulp: add sim node
  ARM: dts: imx6ull: change to use new compatible "fsl,imx6ull-usdhc" for usdhc
  ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible
  ARM: dts: imx6sx: Add DISPLAY power domain support
  ARM: dts: i.MX51: digi-connectcore-som: Add support for I2C bus recovery
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.1:
 - Convert the bindings of FSL SoCs and the boards built on FSL SoCs to
   json-schema.
 - Add bindings for boards: i.MX8QXP MEK, LS1012A based Oxalis, and
   i.MX6 based Y Soft IOTA Draco and Hydra.
 - Add vendor prefix for EBS-SYSTART GmbH and Catalyst Semiconductor.
 - Add bindings for imx8qm scu clock and imx7ulp system integration
   module.

* tag 'imx-bindings-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: fsl: scu: add imx8qm scu clock support
  dt-bindings: fsl: scu: add fallback compatible string for clock
  dt-bindings: arm: fsl: Add devicetree binding for Oxalis
  dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
  dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based boards
  dt-bindings: Add vendor prefix for Catalyst Semiconductor
  dt-bindings: arm: Add Y Soft IOTA Draco, Hydra and Ursa boards
  dt-bindings: fsl: add imx7ulp system integration module binding
  dt-bindings: arm: imx: add imx8qxp mek support
  dt-bindings: arm: Convert FSL board/soc bindings to json-schema
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.1
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: ec100: add the GPIO line names
  ARM: dts: meson8b: ec100: improve the description of the regulators
  ARM: dts: meson8b: ec100: enable the Ethernet PHY interrupt
  ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
  ARM: dts: meson8: add the temperature calibration data for the SAR ADC
  ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible
  ARM: dts: meson: switch the clock controller to the HHI register area
  ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
  ARM: dts: meson8b: add the Mali-450 MP2 GPU
  ARM: dts: meson8: add the Mali-450 MP6 GPU
  dt-bindings: gpu: mali-utgard: add Amlogic Meson8 and Meson8b compatible
  ARM: dts: meson8b: add the APB bus
  ARM: dts: meson8: add the APB bus
  ARM: dts: meson6: add the APB2 bus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.1
- new board: G12a-based x96 max
- G12a: add peripheral clock controller and clock measure support
- s400: fix SD/eMMC max rate issues
- s400: audio: add sp/dif in support
- GX: support simplefb

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add g12a x96 max board
  dt-bindings: arm: amlogic: add amediatech x96-max bindings
  arm64: dts: meson: g12a: add peripheral clock controller
  arm64: dts: meson: g12a: add clk measure support
  arm64: dts: meson: axg: add clk measure support
  arm64: dts: meson: fix g12a buses
  arm64: dts: meson-axg: add efuse device
  arm64: dts: meson: s400: fix emmc maximum rate
  arm64: dts: meson: s400: enable sdr104 on sdio
  arm64: dts: meson-gx: add support for simplefb
  dt-bindings: meson: add specific simplefb bindings
  arm64: dts: meson-gx: Add canvas provider node to the vpu
  arm64: dts: meson-axg: s400: add spdifin to the sound card
  arm64: dts: meson-axg: s400: add spdif-dir codec
  arm64: dts: meson-axg: add spdifin
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt for 5.1 (part 1)

 - Cleanup marvell,dsa properties

* tag 'mvebu-dt-5.1-1' of git://git.infradead.org/linux-mvebu:
  arch: arm: dts: Remove disabled marvell,dsa properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt64 for 5.1 (part 1)

 - Interrupt support to Armada 7K/8K thermal nodes
 - Armada 37xx related patches allowing to enable suspend to RAM
   (USB2, USB3, PCIe, SATA, DSA)
 - uDPU board support (Armada-3720 based):single-port FTTdp
    distribution point unit
 - Fixes for EspressoBin Ethernet support when using U-Boot mainline
 - cleanup for partitions under flashes nodes

* tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs
  arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property
  arm64: dts: marvell: armada-3720-espressobin: declare PCIe PHY
  arm64: dts: marvell: armada-37xx: declare the COMPHY node
  arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes
  arm64: dts: armada-3720-espressobin: Set mv88e6341 cpu port as RGMII-ID
  arm64: dts: armada-3720-espressobin: Configure RGMII and SMI pins
  arm64: dts: marvell: Add device tree for uDPU board
  arm64: dts: marvell: armada-3720-espressobin: declare PCIe warm reset pin
  arm64: dts: marvell: armada-37xx: declare PCIe reset pin
  arm64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
  arm64: dts: marvell: armada-37xx: fix USB2 memory region
  arm64: dts: marvell: armada-37xx: declare SATA clock
  arm64: dts: marvell: armada-37xx: fix SATA node scope
  arm64: dts: marvell: add interrupt support to cp110 thermal node
  arm64: dts: marvell: add interrupt support to ap806 thermal node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt2712:
Add device nodes for usb3, iommu, smi, i2c, spi, pwm,
mmc, NAND flash and PCIe

mt6797:
add pinctrl node
enable uart pins on x20 board
enable uart pins on EVB

mt7622:
Add all CPUs to the cooling maps

mt7623a:
Remove unused binding description

mt7629:
Add binding description for the SoC and the BananaPi
based on this chip

mt8173:
Add all CPUs to the cooling maps

mt8183:
Add binding description for the SoC

* tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: arm: mediatek: add support for MT7622 BPI-R64 and MT7629 RFB
  dt-bindings: arm: mediatek: remove unused "mediatek, mt7623a"
  dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
  arm64: dts: add pcie nodes for MT2712
  arm64: dts: add nand nodes for MT2712
  arm64: dts: add mmc nodes for MT2712
  arm64: dts: add pwm nodes for MT2712
  arm64: dts: add spi nodes for MT2712
  arm64: dts: add i2c nodes for MT2712
  arm64: dts: add iommu/smi nodes for MT2712
  arm64: dts: Add USB3 related nodes for MT2712
  ARM64: dts: mediatek: Add all CPUs in cooling maps
  arm64: dts: Add uart for mt6797 EVB
  arm64: dts: mediatek: x20: Add pinmux support for UART1
  arm64: dts: mediatek: mt6797: Add pinctrl support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.0-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt7623:
- add cooling mask to all CPUs
- add compatible to sysirq binding

* tag 'v5.0-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: interrupt-controller: update bindings for MT7623
  ARM: dts: mt7623: Add all CPUs in cooling maps
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.1-rc1

This contains a couple of fixes to existing device trees, enables CPU
frequency scaling on various Tegra210 boards, enables the TCU as debug
serial port on Jetson Xavier, adds various improvements for SDMMC on
Tegra210, Tegra186 and Tegra194 boards and finally adds initial support
for the NVIDIA Shield TV.

* tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
  arm64: tegra: Update compatible for Tegra186 I2C
  arm64: tegra: Update compatible for Tegra210 I2C
  arm64: tegra: Support 200 MHz for SDMMC on Tegra194
  arm64: tegra: Add CQE Support for SDMMC4
  arm64: tegra: Add SDMMC auto-calibration settings
  arm64: tegra: Mark TCU as primary serial port on Tegra194 P2888
  arm64: tegra: Add nodes for TCU on Tegra194
  arm64: tegra: Enable DFLL clock on Smaug
  arm64: tegra: Add CPU power rail regulator on Smaug
  arm64: tegra: Enable DFLL clock on Jetson TX1
  arm64: tegra: Add pinmux for PWM-based DFLL support on P2597
  arm64: tegra: Add CPU clocks on Tegra210
  arm64: tegra: Add DFLL clock on Tegra210
  arm64: tegra: p2771-0000: Use TEGRA186_ prefix for GPIO names
  arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names
  arm64: tegra: p2597: Sort nodes by unit-address
  arm64: tegra: p2972: Sort nodes properly
  arm64: tegra: Add regulators for Tegra210 Darcy
  arm64: tegra: Add pinmux for Darcy board
  arm64: tegra: Add gpio-keys nodes for Darcy
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.1-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.1-rc1

Contains a single patch that adds the "jedec,spi-nor" compatible string
where appropriate.

* tag 'tegra-for-5.1-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: add "jedec,spi-nor" flash compatible binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: tegra: Changes for v5.1-rc1

This contains device tree binding updates for CPU frequency scaling on
Tegra210, BPMP support on Tegra210 and support for NVIDIA Shield TV.

* tag 'tegra-for-5.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: cpufreq: tegra124: remove cpu_lp clock from required properties
  dt-bindings: cpufreq: tegra124: remove vdd-cpu-supply from required properties
  dt-bindings: clock: tegra124-dfll: add Tegra210 support
  dt-bindings: clock: tegra124-dfll: Update DFLL binding for PWM regulator
  dt-bindings: firmware: tegra186-bpmp: Remove name property
  dt-bindings: firmware: Add bindings for Tegra210 BPMP
  dt-bindings: tegra: Add Shield TV device tree binding documentation
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.1

* R-Car H2 (r8a7790) based Stout board
  - Convert to new LVDS DT bindings

* R-Car H1 (r8a7779) and M1A (r8a7778) SoCs
  - Describe HSCIF0/1 devices in DT

* RZ/G1M (r8a7743) SoC
  - Correct sort order of the RWDT node
  - Remove aliases: should be defined in board rather than SoC DT if needed
  - Remove generic compatible string from iic3: it is not compatible

* RZ/G1N (r8a7744) SoC
  - Describe LVDS and DU devices in DT
  - Correct sort order of VSP and MSIOF noces

* RZ/G1C (r8a7747) based iWave SBC
  - Enable RTC

* RZ/A2M (r7s9210) SoC and EVB
  - Initial support

* tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7744: Add LVDS support
  ARM: dts: r8a7744: Add DU support
  ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB
  ARM: dts: r7s9210: Initial SoC device tree
  ARM: dts: r8a7779: Add HSCIF0/1 device nodes
  ARM: dts: r8a7778: Add HSCIF0/1 support
  ARM: dts: r8a7743: Fix sorting of rwdt node
  ARM: dts: r8a7743: Remove aliases from SoC dtsi
  ARM: dts: r8a7743: Remove generic compatible string from iic3
  ARM: dts: r8a7744: Fix sorting of vsp and msiof nodes
  ARM: dts: iwg23s-sbc: Enable RTC
  ARM: dts: stout: Convert to new LVDS DT bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v5.1

* R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards
  - Enable HS400 support for eMMC

* R-Car E3 (r7a77990) SoC
  - Add OPPs table for cpu devices

* RZ/G2E (r8a774c0) SoC
  - Describe TMU, CMT, SDHI devices in DT
  - Describe pincontrol support for SCIF2 device in DT
  - Add OPPs table for cpu devices

* RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board,
  and CAT874 board
  - Initial support

* tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: cat875: Enable PCIe support
  arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support
  arm64: dts: renesas: r8a774c0: Add TMU device nodes
  arm64: dts: renesas: r8a774c0: Add CMT device nodes
  arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices
  arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices
  arm64: dts: renesas: enable HS400 on R-Car Gen3
  arm64: dts: renesas: cat875: Add ethernet support
  arm64: dts: renesas: r8a774c0-cat874: Add uSD support
  arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2
  arm64: dts: renesas: Add Si-Linux EK874 board support
  arm64: dts: renesas: Add Si-Linux CAT874 board support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT changes for 5.1, take 2

Our usual bunch of DT changes for the Allwinner arm SoCs:
  - LCD support for the Q8 A13 tablets
  - GMAC support for the A80
  - PMIC power supplies for the A83t

* tag 'sunxi-dt-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards
  ARM: dts: sun9i: cubieboard4: Enable GMAC
  ARM: dts: sun9i: a80-optimus: Enable GMAC
  ARM: dts: sun9i: Add A80 GMAC RGMII pinmux setting
  ARM: dts: sun9i: Add A80 GMAC gigabit ethernet controller node
  ARM: dts: sun9i: Add GMAC clock node
  ARM: dts: sun9i: cubieboard4: Add GPIO pin-bank regulator supplies
  ARM: dts: sun9i: a80-optimus: Add GPIO pin-bank regulator supplies
  ARM: dts: sun9i: a80-optimus: Add node for AXP809's unused dc1sw regulator
  ARM: dts: sun5i: q8-tablet: Use bananapi,s070wv20-ct16 panel compatible
  ARM: dts: sun5i: q8-tablet: Add LCD Panel power supply
  ARM: dts: sun5i: q8-tablet: Add LCD Panel enable GPIO
  ARM: dts: sun5i: q8-tablet: Move panel properties to correct node level
  ARM: dts: sun5i: Add backlight GPIO for reference design tablet
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner arm64 DT changes for 5.1, take 2

Our usual round of DT changes for the arm64 Allwinner SoCs:
  - Enabling of the various power supplies on most a64 boards
  - H6 SRAM controller support
  - A64 CSI support

* tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards
  arm64: dts: allwinner: a64: teres-i: enable power supplies
  arm64: dts: allwinner: h6: Add support for the SRAM C1 section
  dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1
  arm64: dts: allwinner: a64: Add A64 CSI controller
  arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner H3 and H5 changes for 5.1

Our usual round of DT changes shared between arm and arm64.

We have a bunch of changes for board, improving the eMMC support on the H5
variant of the All-H3-CC, enabling HDMI and reworking the CSI driver.

* tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable
  ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller
  ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10

* tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: update more missing reset properties
  ARM: dts: socfpga: update missing reset property peripherals
  ARM: dts: Add support for 96Boards Chameleon96 board
  dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
  arm64: dts: stratix10: Add Stratix10 SMMU support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM64: DT: Hisilicon SoCs DT updates for 5.1

* Hi6220 SoC and related boards:
  - Add DMA entries to enable DMA for Bluetooth transfers
  - Add power-on delay to make wifi stable
  - Revert HS200 mode to avoid eMMC controller resets and block read failures

* Hi3660 SoC and related boards:
  - Fix SD card detection via setting cd-gpios correctly

* Hi3798 SoC and related boards:
  - Fix malformed SPDX license identifier

* tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"
  arm64: dts: hikey: Give wifi some time after power-on
  arm64: dts: hi3798cv200: fix malformed SPDX license identifier
  arm64: dts: hikey960: fix SDcard detection
  arm64: dts: hikey: Add DMA entries for Bluetooth UART
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm Device Tree Changes for v5.1

* Fixup GIC IRQ flags and GSBI state on MSM8660
* Add USB OTG, gpio ranges, and Wifi support on MSM8974 Hammerhead
* Remove skeleton.dtsi on IPQ4019

* tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: ipq4019: Remove skeleton.dtsi
  ARM: dts: qcom: msm8974-hammerhead: add USB OTG support
  ARM: dts: qcom: msm8974: add gpio-ranges
  ARM: dts: qcom: msm8974-hammerhead: add WiFi support
  ARM: dts: msm8660: Fix up GIC IRQ flags
  ARM: dts: msm8660: Mark two GSBI blocks "disabled"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm ARM64 Updates for v5.1

* Add MSM8998 RPMCC, I2C, and USB related nodes
* Add MSM8996 rpmpd node
* Fix typo in MSM8996 pin definitions
* Disable MSM8996 VFE smmu to fix security violation
* Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404
* Enable SDCC1 HS400 support on QCS404
* Add a multitude of nodes on SDM845:
  SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh
  bus interconnect, WCN3990 WLAN
* Add gpio ranges to SDM845 TLMM
* Fix regulator load on sdcard on MSM8998-mtp board

* tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (41 commits)
  arm64: dts: sdm845: Add interconnect provider DT nodes
  arm64: dts: qcom: msm8996: Disabled VFE SMMU
  arm64: dts: qcom: qcs404: Add rpmcc node
  arm64: dts: qcom: msm8998: Add rpmcc node
  arm64: dts: qcom: msm8998: Add USB-related nodes
  arm64: dts: qcom: qcs404: Add QUP I2C and SPI nodes
  arm64: dts: qcom: qcs404: Define remaining UARTs
  arm64: dts: qcom: qcs404: Specify pinctrl state for UART
  arm64: dts: qcom: sdm845: Fix lpasscc reg
  arm64: dts: qcom: sdm845: Remove the duplicate header inclusion
  arm64: dts: qcom: sdm845: Add reserve-memory nodes
  arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node
  arm64: dts: qcom: sdm845: Extend ranges and describe DMA space
  arm64: dts: qcom: sdm845: Increase address and size cells for soc
  arm64: dts: sdm845: Add rpmh powercontroller node
  arm64: dts: msm8996: Add rpmpd device node
  arm64: dts: sdm845: Add WCN3990 WLAN module device node
  arm64: dts: qcom: sdm845: Add PDC Global reset driver node
  arm64: dts: qcom: sdm845: Add SCM DT node
  arm64: dts: qcom: sdm845: Fix pcs_misc region address for UNI PHY
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>