Merge tag 'ti-keystone-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

Keystone2 device tree updates for v6.8

Cosmetic cleanups:
* white space cleanup around '='

* tag 'ti-keystone-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  ARM: dts: ti: keystone: minor whitespace cleanup around '='

Link: https://lore.kernel.org/r/20231218153039.dok52xazqshbr6ie@playroomSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: ZynqMP DT changes for 6.8

- Fix overlay rules to remove KR260 targets
- Move ethernet phys to mdio node
- Fix couple of issues reported by W=1
 - Do not use _ in node names
 - Use lowercase in register address
 - Remove address/size-cells from nodes without child
 - Moved fixed clock to root on KV260
- Fix issues reported by dt-schema
 - additional compatible string for qspi on SOM
- Move arm/xilinx.yaml to soc vendor to cover also other archs
- Describe new Microblaze V qemu platform
- Add missing mailbox destination compatible string

* tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Add missing destination mailbox compatible
  arm64: zynqmp: Fix clock node name in kv260 cards
  arm64: zynqmp: Move fixed clock to / for kv260
  dt-bindings: soc: Add new board description for MicroBlaze V
  dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc
  arm64: xilinx: Remove address/size-cells from gem nodes
  arm64: xilinx: Remove address/size-cells from flash node
  arm64: xilinx: Put ethernet phys to mdio node
  arm64: xilinx: Remove mt25qu512a compatible string from SOM
  arm64: xilinx: Use lower case for partition address
  arm64: xilinx: Do not use '_' in DT node names
  arm64: dts: xilinx: Apply overlays to base dtbs

Link: https://lore.kernel.org/r/CAHTX3dLyA1Y9guLKSNJTChFVvkspMfTa0odULyAdcuFUSiSH3A@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree for 6.8:

- New board support: MBa93xxCA starter kit, LX2160A based MBLX2160A,
  Dimonoff Gateway EVK, Verdin i.MX8M based Mallow, and SKOV i.MX8MP revB.
- A set of changes from Adam Ford to enable MIPI_DSI, overdrive mode and
  NPU support for Beacon i.MX8M boards.
- A number of changes from Alexander Stein to add CCM interrupts for
  CCM, 'chassis-type' property, and enable VPU and LVDS display for
  TQ-Systems boards.
- i.MX93 update for AUDIO, I3C, ANATOP and uSDHC.
- A couple of changes from David Heidelberg to correct dt-schema check
  errors for 'fsl,tmu-calibration' and 'gpio-fan,speed-map'.
- A bunch of nice dt-schema check fix-ups from Fabio Estevam.
- A couple of debix-som update from Kieran Bingham adding heartbeat LED
  and CSI power regulators.
- White-space cleanup from Krzysztof Kozlowski.
- Add display support for imx8mn-bsh-smm-s2/pro board.
- A series from Tim Harvey to add TPM support for i.MX8M Venice devices.

* tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
  arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
  arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
  arm64: dts: imx8qxp: Add VPU subsystem file
  arm64: dts: imx8qxp-mek: Move port under USB connector
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
  arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
  arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
  arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
  arm64: dts: imx8mp-venice: Fix USB connector description
  arm64: dts: imx8mp-verdin: Fix USB connector description
  arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
  arm64: dts: imx8mn-evk: Move port under USB connector
  arm64: dts: imx8mm-evk: Move port under USB connector
  arm64: dts: freescale: introduce dimonoff-gateway-evk board
  arm64: dts: imx8m*-tqma8m*: Add chassis-type
  arm64: dts: imx8mn-beacon: Support overdrive mode
  arm64: dts: imx8mn: Enable Overdrive mode
  arm64: dts: imx8mm-beacon: Enable overdrive mode
  arm64: dts: imx8mm: Add optional overdrive DTSI
  arm64: dts: imx8mm: Reduce GPU to nominal speed
  ...

Link: https://lore.kernel.org/r/20231216064605.876196-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX ARM device tree for 6.8:

- A bunch of changes from Fabio Estevam cleaning up dt-schema warnings.
- A number of i.MX7 related small fixes and peripheral addition from
  Alexander Stein.
- A set of changes from Hiago De Franco adding usdhc aliases for Apalis
  and Colibri boards.
- A white-space cleanup from Krzysztof Kozlowski.
- A change from Linus Walleij to correct errors in the Marvell MV88E6xxx
  switch descriptions.
- Fix a couple of typo in comment for MBA6 and MBA6ULX board.
- Add on-chip memory and enable MIPI-DSI support for i.MX7.
- Add LM75A sensor for TQMA7 board.

* tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name
  ARM: dts: imx25: Remove unneeded keypad properties
  ARM: dts: imx23/28: Fix the DMA controller node name
  ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
  ARM: dts: imx27-apf27dev: Fix LED name
  ARM: dts: imx25/27: Pass timing0
  ARM: dts: imx25: Fix the iim compatible string
  ARM: dts: imx25: Move usbphy nodes out of simple-bus
  ARM: dts: imx1: Use 'bus' for AIPI bus
  ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus
  ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus
  ARM: dts: imx27: Use 'bus' for EMI bus
  ARM: dts: imx27: Use 'bus' for AIPI bus
  ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
  ARM: dts: imx1: Fix sram node
  ARM: dts: imx27: Fix sram node
  ARM: dts: imx: Use flash@0,0 pattern
  ARM: dts: imx25/27-eukrea: Fix RTC node name
  ARM: dts: imx25-pdk: Pass #sound-dai-cells
  ARM: dts: imx25: Pass I2C clock-names property
  ...

Link: https://lore.kernel.org/r/20231216064605.876196-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX DT bindings for 6.8:

- New vendor prefix for Dimonoff and echarge Véhicule Électrique (RVE).
- New board compatible for TQ-Systems LX2160A, RVE gateway, Dimonoff
  gateway EVK, i.MX8M Mallow and SKOV i.MX8MP RevB board.

* tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: add Dimonoff gateway EVK board
  dt-bindings: vendor-prefixes: add dimonoff
  dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
  dt-bindings: arm: fsl: add verdin imx8mp mallow board
  dt-bindings: arm: fsl: add verdin imx8mm mallow board
  dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB board
  dt-bindings: arm: fsl: add RVE gateway board
  dt-bindings: vendor-prefixes: add rve

Link: https://lore.kernel.org/r/20231216064605.876196-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt

More Ux500 device tree updates for v6.8

The HREF520 reference design had the wrong analog baseband
defined causing a boot regression.

Was AB8500, but this board has AB8505.

Rearrange the device trees to make it possible to define
a different AB and slot it in.

* tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: ux500-href: Switch HREF520 to AB8505
  ARM: dts: ux500-href: Push AB8500 config out
  ARM: dts: ux500-href: Push AB8500 inclusion to the top

Link: https://lore.kernel.org/r/CACRpkdZ9wCV7oohF2KX6MFwmuSPR_i7et8O5SH=op6gyQ4mOvQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt

Renesas DTS updates for v6.8 (take two)

  - Add IA55 interrupt controller and Ethernet support for the RZ/G3S
    SoC and the RZ/G3S SMARC SoM,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control
  arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
  arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities
  arm64: dts: renesas: r9a08g045: Add Ethernet nodes
  arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node

Link: https://lore.kernel.org/r/cover.1702642342.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.8, round 1

Highlights:
----------

- MCU:
  -  Add SPI support on STM32F746.
  -  Better describe vcc_3v3 for SD and DSI on stm32f469-disco.

- MPU:
  - STM32MP13:
    - Add DCMIPP (Digital Camera Memory Interface Piwel Processor)  on STM32MP135.

  - STMP32MP15:
    - Change "phys" affectation from board to Soc dtsi file for USB host as it is hard  linked
      to the port 0 of usbphyc.
    - Fix SCMI and No-SCMI compatible in boards.

  - STM32MP25:
    - Add BSEC support to read the device part number OTP and the package data register OTP.

* tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: add dcmipp support to stm32mp135
  arm64: dts: st: add bsec support to stm32mp25
  ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
  ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
  dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
  ARM: dts: stm32: minor whitespace cleanup around '='
  ARM: dts: stm32: add SPI support on STM32F746
  ARM: dts: stm32: add STM32F746 syscfg clock
  ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco

Link: https://lore.kernel.org/r/9363227b-1c44-4a20-b245-efbbbf9ab1dd@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- new boards: Orange Pi Zero 2W, Transpeed 8K618-T

* tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
  dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
  dt-bindings: vendor-prefixes: add Transpeed
  arm64: dts: allwinner: h616: add Orange Pi Zero 2W support
  dt-bindings: arm: sunxi: add Orange Pi Zero 2W

Link: https://lore.kernel.org/r/ZXtWFk-Bne835txP@archlinuxSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Microchip AT91 device tree updates for v6.8

It contains:
- IRQ support for Ethernet PHYs on SAM9X60-EK and SAM9X60-Curiosity
  boards
- removal of the mmc-ddr-3_3v property from SD controllers connected to SD
  slots, for SAMA5D27-WLSOM1-EK and SAMA5D27-SOM1-EK boards, as this
  property is for eMMC devices

* tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
  ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
  ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY
  ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY

Link: https://lore.kernel.org/r/20231214174954.3045355-1-claudiu.beznea@tuxon.devSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt

Arm Vexpress/Juno update for v6.8

Just a single update to align the thermal zone names with bindings matching
[alphanumericals]*-thermal pattern.

* tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Align thermal zone names with bindings

Link: https://lore.kernel.org/r/20231213115826.3577764-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards are the Geniatech XPI-3128 (RK3128), Sonoff iHost (rv1109)

One "new" soc is the rv1109 which is a two-core variant of the rv1126
and everything else is identical.

Lots of love for the old rk3128 (power-domains, gpu, gmac, usb) and
rv1126 (uart pins, i2c2 special case) and rework of aliases to have
core busses that are hard-numbered in boards and documentation centrally
in the dtsi, but the per board aliases in the boards (ethernet).

Plus the rk3036 got a yaml hdmi binding which required some small fixes.

* tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
  ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
  ARM: dts: rockchip: fix rk3036 hdmi ports node
  ARM: dts: rockchip: add gpio alias for gpio dt nodes
  ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
  ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
  ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
  ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
  dt-bindings: arm: rockchip: Add Sonoff iHost
  ARM: dts: rockchip: Add rv1109 SoC
  ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
  ARM: dts: rockchip: Add i2c2 node to rv1126
  ARM: dts: rockchip: Serial aliases for rv1126
  ARM: dts: rockchip: Add alternate UART pins to rv1126
  ARM: dts: rockchip: Enable GPU for XPI-3128
  ARM: dts: rockchip: Add GPU node for RK3128
  ARM: dts: rockchip: Add power-controller for RK3128
  ARM: dts: rockchip: Enable gmac for XPI-3128
  ARM: dts: rockchip: Add gmac node for RK3128
  ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
  ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
  ...

Link: https://lore.kernel.org/r/3197878.5fSG56mABF@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)

The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
and audio for the EVB1.

Some smaller improvements for the other socs (fifo-depths on rk3328,
gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
and a fix for the newly converted gpio-fan yaml binding).

Also a number of aliases were moved. Always-numbered core busses can have their
aliases in the soc dtsi, as is done in a number of cases already and other alises
like ethernet really should be per board.

* tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
  arm64: dts: rockchip: Add Anbernic RG351V
  arm64: dts: rockchip: Split RG351M from Odroid Go Advance
  dt-bindings: arm: rockchip: Add Anbernic RG351V
  arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
  arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
  arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
  arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
  arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
  arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
  arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
  arm64: dts: rockchip: add gpio alias for gpio dt nodes
  arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
  arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
  arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
  arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
  arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
  arm64: dts: rockchip: add Theobroma Jaguar SBC
  dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
  arm64: dts: rockchip: Add Powkiddy X55
  dt-bindings: arm: rockchip: Add Powkiddy X55
  ...

Link: https://lore.kernel.org/r/3535836.iIbC2pHGDl@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt

MediaTek ARM64 DeviceTree updates for v6.8

This adds devicetree bindings and nodes for:
 - Media Data Path 3 (MDP3) bindings and enablement on MT8195
 - Smart Voltage Scaling (SVS) on MT8195
 - LVTS SoC thermal on MT8192
 - MT8188 SoC along with its resets, display bindings, and more
 - MT8183 hardware video decoder (mtk-vcodec-dec)

Adds the following new machines:
 - MT8188 Evaluation Board (EVB)
 - MT8183 Chromebooks: Kukui-Katsu, Jacuzzi-Makomo, Pico, Pico6

Performs cleanups for various MediaTek SoCs and PMICs, and also
includes some spare fixes.

* tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (60 commits)
  arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node
  arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace
  arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs
  arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes
  arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0
  arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties
  arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property
  arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile
  dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188
  dt-bindings: arm: mediatek: Add mt8188 pericfg compatible
  dt-bindings: arm: Add compatible for MediaTek MT8188
  arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes
  dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195
  arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators
  dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml
  arm64: dts: mediatek: mt8195: add MDP3 nodes
  arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name
  arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes
  dt-bindings: display: mediatek: padding: add compatible for MT8195
  dt-bindings: display: mediatek: split: add compatible for MT8195
  ...

Link: https://lore.kernel.org/r/20231212114515.121695-1-angelogioacchino.delregno@collabora.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM changes for v6.8

1. Exynos4212 and Exynos4412: Final fixes for dtbs_check warnings.
   Replace duplicate PMU node in FIMC IS node with syscon phandle.  The
   old solution of duplicated PMU node was not a correct representation of
   the hardware and could have concurrent access issues.

   The DTS change depends on media FIMC IS drivers changes already
   merged in previous cycle, thus it is not fully
   backwards-compatible.  It is a necessary trade-off in fixing wrong
   description in DTS.

   With this fix, `make dtbs_check` status looks like:
   S3C6410: no warnings
   Exynos: no warnings, one undocumented compatible
   S5PV210: one warning, one undocumented compatible

2. Exynos4210, Exynos4212, Exynos4412, S5PV210:
   Correct FIMC IS camera ranges and IO addresses to silence dtc W=1
   warnings.  No functional impact expected.
   After this fix, there are no dtc W=1 warnings on all ARMv7 platforms.

3. Galaxy I9100: Fix 12-second hang during boot by enabling regulator
   (real cause not really known), add touch keys and accelerometer.

* tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: samsung: exynos4210-i9100: Add accelerometer node
  ARM: dts: samsung: exynos4210-i9100: Add node for touch keys
  ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12
  ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges
  ARM: dts: samsung: exynos4: fix camera unit addresses/ranges
  ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle

Link: https://lore.kernel.org/r/20231212093105.13938-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v6.8

Two (and a half) major items are coming with this pull request:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
   because that's what guidelines expect [1] and is generally
   recommended practice.  Existing compatibles are left untouched, thus
   no driver changes are needed.  The work only cleans things up, so any
   future contributions will use recommended style: specific and
   fallback compatibles.

   Since no driver changes are needed in this work and the DTS is
   directly affected by bindings change (running tests with `make
   dtbs_check`), this pull includes all bindings changes, even though
   usual practice is that bindings come via driver subsystem.  Keeping
   everything here makes review and testing easier.  Also will allow us
   to avoid conflicts related to new platforms (see below).

2. Add ExynosAutov920 SoC and SADK board (Samsung Automotive Development
   Kit) with minimal support so far: serial console, GPIO-based keys and
   PWM fan.

3. Add few bindings for upcoming Google GS101 SoC.  This pull request
   does not include its DTS yet, just few reviewed dependencies.  DTS
   will be coming soon.

[1] Documentation/devicetree/bindings/writing-bindings.rst

* tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (38 commits)
  arm64: dts: exynos: add minimal support for exynosautov920 sadk board
  arm64: dts: exynos: add initial support for exynosautov920 SoC
  dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
  dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  dt-bindings: clock: Add Google gs101 clock management unit bindings
  dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
  arm64: dts: fsd: add specific compatibles for Tesla FSD
  dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
  dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
  dt-bindings: serial: samsung: add specific compatible for Tesla FSD
  dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
  dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
  arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
  arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
  dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
  dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
  dt-bindings: pwm: samsung: add exynosautov920 compatible
  dt-bindings: serial: samsung: add exynosautov920-uart compatible
  dt-bindings: samsung: usi: add exynosautov920-usi compatible
  dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
  ...

Link: https://lore.kernel.org/r/20231212093105.13938-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231212-ux500-dts-v1-1-5a31b6742d85@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt

Devicetree changes for omaps

- A series of patches to reorganize Motorola Mapphone related files to add
  support for tablets as the peripherals are different compared to the
  phones

- Apply am57xx-idk overlays to base dtbs

- Extcon update to use id-gpios and vbus-gpios

- Update omap4-epson-embt2ws to enable wlan clock and bluetooth-gnss

- Update for logicpd-torpedo to use bluetooth-gnss node name

* tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap4-embt2ws: Add Bluetooth
  ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device
  ARM: dts: omap4-embt2ws: enable 32K clock on WLAN
  ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  arm: dts: omap: Apply am57xx-idk overlays to base dtbs
  ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617
  ARM: dts: motorola-mapphone: Move handset devices to a common file
  ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894
  dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets

Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM64: DT: HiSilicon ARM64 DT updates for v6.8

- Merge the hi3620-clock binding into hisilicon,sysctrl
- Clean up the hikey970 PMIC dtsi

* tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: hikey970-pmic: clean up SPMI node
  arm64: dts: hisilicon: hikey970-pmic: fix regulator cells properties
  dt-bindings: hisilicon: Merge hi3620-clock into hisilicon,sysctrl binding

Link: https://lore.kernel.org/r/6572C4C8.6050401@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such.

Use matching property syntax and allow correct validation.

No functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Node names should be generic.

Use 'rtc' for the rtc node to fix the following dt-schema warning:

imx27-phytec-phycore-rdk.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
	from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Per imx-keypad.yaml, '#address-cells', '#size-cells', 'clock-names'
are not valid properties.

Remove them to fix the following dt-schema warning:

imx25-pdk.dtb: kpp@43fa8000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'clock-names' were unexpected)
	from schema $id: http://devicetree.org/schemas/input/imx-keypad.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Even if the 'dsp' node is disabled the memory intended to be used by the
DSP is reserved. This limits the memory range suitable for CMA allocation.
Thus disable the dsp_reserved node. DSP users need to enable it in parallel
to the 'dsp' node.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

imx8qxp re-uses imx8qm VPU subsystem file, but it has different base
addresses. Also imx8qxp has only two VPU cores, delete vpu_vore2 and
mu2_m0 accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.

Do as requested to fix the following dt-schema warning:

imx8qxp-mek.dtb: tcpc@50: connector:ports: 'port@0' is a required property
        from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
imx8qxp-mek.dtb: tcpc@50: connector: Unevaluated properties are not allowed ('ports' was unexpected)
        from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add the display and nodes required for its operation.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

After noticing a tendency to misbehave and randomly power down:
switch the HREF520 AB8500 to the AB8505, which is what it has
mounted. After this the board works better.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-3-9dcff0783d62@linaro.org

Push out some AB8500 setup of regulators and phy out to the
per-AB850x variant file ste-href-ab8500.dtsi so it becomes
self-contained for each AB850x chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-2-9dcff0783d62@linaro.org

On the hardware reference designs, include the AB8500 definitions
on the top level in the DTS files, this is to make it possible to
use the AB8505 in the HREF520.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-1-9dcff0783d62@linaro.org

Add dcmipp support to STM32MP135.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

This is a Chinese TV box, probably very similar if not identical to
various other cheap TV boxes with the same specs:
      - Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache)
      - 2 or 4GiB DDR3L DRAM
      - 32, 64, or 128 GiB eMMC flash
      - AXP313a PMIC
      - 100 Mbit/s Ethernet (using yet unsupported internal PHY)
      - HDMI port
      - 2 * USB 2.0 ports
      - microSD card slot
      - 3.5mm A/V port
      - 7-segment display
      - 5V barrel plug power supply

The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. UART1 is used for the Bluetooth chip,
although this isn't working yet.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.comSigned-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

The Transpeed 8K618-T TV box is a Chinese Android TV box, using the
Allwinner H618 SoC.

Add the board/SoC compatible string pair to the list of known boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214015312.17363-3-andre.przywara@arm.comSigned-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

This is a name used by some Chinese TV boxes, add it to the bindings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214015312.17363-2-andre.przywara@arm.comSigned-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

All machines making use of &usbh_ehci and/or &usbh_ohci use

	phys = <&usbphyc_port0>;

So move this setting into the .dtsi. Also add

	phy-names = "usb";

which isn't used by all machines, but nice for consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

The binding erroneously decreed that the SCMI variants of the ST
evaluation kits are compatible with the non-SCMI variants.

This is not correct, as a kernel or bootloader compatible with the non-SCMI
variant is not necessarily able to function, when direct access
to resources is replaced by having to talk SCMI to the secure monitor.

The binding has been adjusted to reflect thus, so synchronize the device
trees now.

Fixes: 5b7e5831 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

SCMI-enabled boards may restrict access to resources like clocks, resets
and regulators to the secure world.

A normal world bootloader or kernel compatible with the non-SCMI-enabled
board is thus not guaranteed to be able to deal with the SCMI variant.

It follows, that the SCMI-enabled board is not compatible with the
non-SCMI enabled board, so drop that compatible.

This change is motivated by the barebox' bootloader's use of bootloader
specification files[1][2]: barebox for non-SCMI DK2 will compare its
own top-level "stm32mp157c-dk2" compatible with all compatibles
listed in the device tree referenced by each bootloader spec file.
If the boot medium contains a configuration with
compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
it will match, because of the second compatible and boot a kernel with
SCMI enabled, although no SCMI may exist on the platform.

[1]: https://uapi-group.org/specifications/specs/boot_loader_specification/
[2]: https://www.barebox.org/doc/latest/user/booting-linux.html#boot-loader-specification

Fixes: 8e14ebb1 ("dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:

imx8mp-dhcom-pdk3.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:

imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>