Merge tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner:

3 new boards, the rk3328-based Rock64 from the Pine64-makers, the
Sapphire som+baseboard which is another evaluation board for Rocckhip
customers and the rk3399-based som+baseboard from Austria-based
Theobroma Systems, which interestingly is in a miniITX formfactor
and provides a real PCIe x4 slot.

New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus,
on rk3328 iommus, pwm, thermal management, and sound as well as operating
points and rk3368 got iommu nodes and cpu operating points.

On existing boards firefly got operating points, the rk3328-evb got its
pmic and gru boards got some sound-related fixes.

* tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  arm64: dts: rockchip: add rk3328-rock64 board
  arm64: dts: rockchip: add rk3328 pdm node
  arm64: dts: rockchip: add more rk3399 iommu nodes
  arm64: dts: rockchip: add rk3368 iommu nodes
  arm64: dts: rockchip: add rk3328 iommu nodes
  arm64: dts: rockchip: Add basic cpu frequencies for RK3368
  arm64: dts: rockchip: add rk805 node for rk3328-evb
  arm64: dts: rockchip: Assign mic irq to correct device for Gru
  arm64: dts: rockchip: init rk3399 vop clock rates
  arm64: dts: rockchip: Add pwm nodes for rk3328
  arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru
  arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3
  arm64: dts: rockchip: remove num-slots property from rk3399-sapphire
  arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board
  arm64: dts: rockchip: add thermal nodes for rk3328 SoC
  arm64: dts: rockchip: add tsadc node for rk3328 SoC
  arm64: dts: rockchip: add rk3328 i2s nodes
  ...

Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a
video connector for MIPI-DSI/CSI and eDP adapter.

This dts is for usage with the RK3399-Q7 SoM Puma.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.

It provides the following feature set:
 * up to 4GB DDR3
 * on-module SPI-NOR flash
 * on-module eMMC (with 8-bit 1.8V interface)
 * SD card (on a baseboad) via edge connector
 * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY
 * HDMI/eDP/2x MIPI-DSI
 * 2x MIPI-CSI
 * USB
   - 1x USB 3.0 dual-role (direct connection)
   - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
 * on-module STM32 Cortex-M0 companion controller, implementing:
   - low-power RTC functionality (ISL1208 emulation)
   - fan controller (AMC6821 emulation)
   - USB<->CAN bridge controller
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

RK3399-Q7 is a Qseven compatible system-on-module by Theobroma Systems.

This adds the module and the EVK baseboard "Haikou"
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD
Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral
devices interface for makers to integrate with sensors and devices.

The devicetree currently supports basic peripherals, with more to be
added later on.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch add pdm controller device node for rk3328.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Pull "arm64: Xilinx ZynqMP DT fixes for v4.14" from Michal Simek:

- Fix DTC warnings
- Add idle states, OP, cci-400, RTC, pcie prefetchable memory
  fpd/lpd dmas, clocks for ep108
- Enable can1
- Fix smmu IRQ, aliases, uart compatible string
- Use generic compatible string for i2c eeprom

* tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Add generic compatible string for I2C EEPROM
  arm64: zynqmp: Add missing mmc aliases in ep108
  arm64: zynqmp: Enable can1 for ep108
  arm64: zynqmp: Added clocks to DT for ep108
  arm64: zynqmp: Use C pre-processor for includes
  arm64: zynqmp: Add fpd/lpd dmas
  arm64: zynqmp: Set status disabled in dtsi
  arm64: zynqmp: Add new uartps compatible string
  arm64: zynqmp: Correct IRQ nr for the SMMU
  arm64: zynqmp: Add support for RTC
  arm64: zynqmp: Adding prefetchable memory space to pcie node
  arm64: zynqmp: Add CCI-400 node
  arm64: zynqmp: Add dcc console for zynqmp
  arm64: zynqmp: Add operating points
  arm64: zynqmp: Add idle state for ZynqMP
  arm64: zynqmp: Add references to cpu nodes
  arm64: zynqmp: Move nodes which have no reg property out of bus
  arm64: zynqmp: Remove leading 0s from mtd table for spi flashes
  arm64: dts: xilinx: fix PCI bus dtc warnings

Add VPU/VDEC/IEP/ISP0/ISP1 iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add IEP/ISP/VOP/HEVC/VPU iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add H265e/VEPU/VPU/VDEC/VOP iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing mmc aliases.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch enables can1 for ep108.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Added clks for ep108 platform.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This enables option to use dt binding
headers.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Wire fpd and lpd dma channels to zynqmp.dtsi.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Do not enable smmu via dtsi. Enable it in board file when needed.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Mainline kernel has r1p12 compatible string now. Use this new compatible
string and also append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add support for RTC.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add CCI-400 node to DTSI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add debug console to dtsi to be able to enable it in
board dts file.
Keep in your mind that every core has separate dcc port in case you want
to run SMP kernel.
DCC is very helpful communication channel for debugging.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Adding operating-points-v2 for zynqmp.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Added the idle-states node to describe zynqmp idle states. Only
cpu-sleep-0 idle state is added in this patch. References to the
idle-states node are added in all CPU nodes. Time values: entry/exit
latencies and min-residency, needs to be tuned. arm,psci-suspend-param
is selected to comply with PSCIv1.0 and Extended StateID format.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing references to all cpu nodes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>

Nodes without reg properties shouldn't be placed in amba node.
Move them out.

Warnings:
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/misc_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/i2c_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/sata_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This adds and enable the operating points that have been tested and are
currently supported by the SoC. This also adds clocks for ARMCLKL and
ARMCLKB.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

RK805 consists of 4 DCDCs, 3 LDOs. It's different from RK808
and RK818 that there are 2 output only GPIOs, we should add
properties "gpio-controller" and "gpio-cells = <2>".
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64

Pull "Allwinner arm64 device tree changes for 4.14, round 2" from Chen-Yu Tsai:

The usual improvement patches:

  - PMIC, USB and WiFi enabled for Bananapi M64

  - New board added: NanoPi A64

  - New board added: Olimex A64-OLinuXino

* tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: a64: Add A64-OLinuXino initial support
  arm64: allwinner: a64: Add initial NanoPi A64 support
  arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64
  arm64: allwinner: a64: enable AXP803 for Banana Pi M64
  arm64: allwinner: a64: enable USB host controller for BPi M64

Currently we are assigning mic irq to rt5514 i2c driver, which is wrong.
Assign it to rt5514 spi driver instead.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

We need to init vop aclk and hclk incase the U-Boot does not do
the initialize.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

There are 4 pwm channels built in rk3328 soc, need to configure
the both APB clock and bus clock.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

According to rt5514 dt-binding, it should be "realtek,dmic-init-delay-ms".

Fixes: 48f4d979 (arm64: dts: rockchip: add Gru/Kevin DTS)
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Pull "mvebu dt64 for 4.14 (part 2)" from Gregory CLEMENT:

- Enable uSD on ESPRESSObin (Armada 37xx based board)
- Add NAND support on Armada 7K/8K SoCs
- Enable USB host on Armada-7040-DB and Armada-8040-DB boards

* tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu:
  ARM64: dts: marvell: enable USB host on Armada-8040-DB
  ARM64: dts: marvell: enable USB host on Armada-7040-DB
  ARM64: dts: marvell: add NAND support on the CP110
  ARM64: dts: marvell: armada-37xx: Enable uSD on ESPRESSObin
  arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files

dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Duc Dang <dhdang@apm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:

* Add PFC device node to R-Car D3 (r8a77995)

  This is a step towards enabling devices that use multiplexed pins
  - including ethernet - on boards that use the r8a7796 SoC.

* Add USB nodes to R-Car M3-W (r8a7796)

  This is a step towards enabling USB devices on boards that
  use the r8a7796 SoC.

* Use newly added Gen-3 fallback compat string

  This is consistent with ongoing efforts to use per-generation
  fallback strings where appropriate across devices found
  on R-Car SoCs. The aim of the effort being to strike a balance
  between the limited information available about the compatibility
  of devices found on different SoCs and the desire to ease enabling
  devices on new SoCs.

  This has no run-time effect due to the presence of a per-SoC
  compat string.

* Cleanup whitespace and extra LVDS port label

  Minor cleanups, no run-time effect.

* tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a77995: add pfc device node
  arm64: dts: r8a7796: Add HSUSB device node
  arm64: dts: r8a7796: Add USB-DMAC device nodes
  arm64: dts: r8a7796: Add USB3.0 host device node
  arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes
  arm64: dts: r8a7796: add usb2_phy device nodes
  arm64: dts: r8a7795: correct whitespace of companion property
  arm64: dts: r8a7795: Use R-Car SATA Gen3 fallback compat string
  arm64: dts: salvator-common: Remove extra LVDS port label

Merge tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Pull "Qualcomm ARM64 Updates for v4.14 Part 2" from Andy Gross:

* Add IPQ8074 SoC and HK01 board support

* tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: Add ipq8074 SoC and HK01 board support

Merge tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Pull "ZTE arm64 device tree updates for 4.14" from Shawn Guo:

 - A clean up patch from Shawn Lin to remove the deprecated dwmmc
   property 'num-slots' from ZX296718 device tree.
 - Enable various devices for ZX296718 SoC support, VGA display, I2S
   audio, pinctrl, GPIO, PWM and IRDEC.
 - Update zx296718-evb support to use audio-graph-card for HDMI audio
   and add I2S sound card.
 - Add initial zx296718-pcbox board support with storage, audio,
   display devices enabled.

* tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: zte: add initial zx296718-pcbox board support
  arm64: dts: zx296718-evb: add I2S sound card support
  arm64: dts: zx296718-evb: use audio-graph-card for HDMI audio
  arm64: dts: zx296718: add irdec device for remote control
  arm64: dts: zx296718: add PWM device support
  arm64: dts: zx296718: add voltage data into OPP table
  arm64: dts: zx296718: set a better parent clock for I2S0
  arm64: dts: zx296718: add pinctrl and gpio devices
  arm64: dts: zx296718: add I2S and I2C audio codec
  arm64: dts: zx296718: add VGA device support
  arm64: dts: zte: remove num-slots from zx296718

Merge tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Pull "Freescale arm64 device tree updates for 4.14" from Shawn Guo:
 - Correct the typo in fsl-ls1088a-rdb board name.
 - A series from Horia Geantă to consolidate aliases node and enable
   crypto support for ls208xa and ls1088a.
 - Enable USB host support for ls1012a.
 - Enable cpuidle support for ls1088a and ls208xa.

* tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"
  arm64: dts: ls208xa: add cpu idle support
  arm64: dts: ls1088a: add cpu idle support
  arm64: dts: freescale: ls1088a: add crypto node
  arm64: dts: freescale: ls208xa: add crypto node
  arm64: dts: freescale: ls208xa: share aliases node
  arm64: dts: ls1012a: add USB host controller nodes